| 2023 |
Anstey A. Structural Dynamics of in Situ Nanofibrillated Polymer Composites [PhD thesis]. University of Toronto; March 2023. |
0 |
0 |
| 2022 |
Wang C. Bubble Dynamics in High-Pressure Foam Injection Molding [PhD thesis]. University of Toronto; 2022. |
0 |
0 |
| 2022 |
Chang ES. Towards the Next Generation of Lightweight Polypropylene Composites With Well-Balanced Mechanical Properties [PhD thesis]. University of Toronto; March 2022. |
0 |
0 |
| 2021 |
Zhao C. Manufacture and Characterization of Micro-/nano-Fibrillated Composites and Their Applications [PhD thesis]. University of Toronto; 2021. |
0 |
0 |
| 2021 |
Ataei M. Multi-Physics Simulation of Foaming Phenomena [PhD thesis]. University of Toronto; 2021. |
0 |
0 |
| 2020 |
Rezaei S. Development of Novel Hybrid Silica Aerogels With a Reticulated Structure Using New Generation of Marcromolecular Precursors [PhD thesis]. University of Toronto; June 2020. |
0 |
0 |
| 2020 |
Kim J-H. Investigation of Superior Mechanical Properties of PP Homopolymer and PP Elastomer Self-Reinforced Blends [Master's thesis]. University of Toronto; March 2020. |
0 |
0 |
| 2020 |
Karamikamkar S. Hybrid Carbon-Modified Polymer-Based Silica Aerogels With Low Thermal Conductivity and Improved Mechanical Properties [PhD thesis]. University of Toronto; 2020. |
0 |
0 |
| 2019 |
Shahin ANM. In-Situ Nano Fibrillation of Polyethylene Terephthalate (PET) in Polypropylene (PP) Through Spunbond Process [Master's thesis]. University of Toronto; 2019. |
0 |
0 |
| 2019 |
Hamidinejad S. Thermal and Electrical Properties of Graphene-Based Polymer Nanocomposite Foams [PhD thesis]. University of Toronto; 2019. |
0 |
0 |
| 2019 |
Cherukupally P. Surface Engineered Sponges Enable Oily Wastewater Remediation and Residual Oil Recovery [PhD thesis]. University of Toronto; 2019. |
0 |
0 |
| 2018 |
Chen YG. Morphology, Crystallization, and Mechanical Property Study of Polypropylene and Polyethylene Terephthalate [Master's thesis]. University of Toronto; 2018. |
0 |
0 |
| 2018 |
Alshrah MM. Development of Lightweight Organic Aerogels for Thermal Insulation Applications [PhD thesis]. University of Toronto; November 2018. |
0 |
0 |
| 2017 |
Wang C. Simulation Ofh Cell Growth in High-Pressure Foam Injection Molding [Master's thesis]. University of Toronto; March 2017. |
0 |
0 |
| 2017 |
Mahmood SH. Thermodynamic Investigation of the Interaction Between Polymer and Gases [PhD thesis]. University of Toronto; 2017. |
0 |
0 |
| 2016 |
Shaayegan V. Investigation of Cell Nucleation and Growth in Foam Injection Molding Through Visualization [PhD thesis]. University of Toronto; November 2016. |
0 |
0 |
| 2016 |
Ding W. Development of Polylactic Acid/cellulose Nanofiber Biocomposite Foams [PhD thesis]. University of Toronto; 2016. |
0 |
0 |
| 2015 |
Rizvi A. Functional Polymer Foams from in-Situ Fibrillated Polymer Blends [PhD thesis]. University of Toronto; 2015. |
0 |
0 |
| 2015 |
Bae SS. Preparation of Polypropylene Foams With Micro/nanocellular Morphology Using a Sorbitol-Based Nucleating Agent [Master's thesis]. University of Toronto; March 2015. |
0 |
0 |
| 2015 |
Arumugam P. Understanding the Fundamental Mechanisms of a Dynamic Micro-Bubble Generator for Water Processing and Cleaning Applications [Master's thesis]. University of Toronto; 2015. |
0 |
0 |
| 2015 |
Andalib KMZ. Increasing Void Fraction of the Polypropylene Foams Blown With Chemical Blowing Agents in High Temperature Extrusion [Master's thesis]. University of Toronto; November 2015. |
0 |
0 |
| 2013 |
Nofar M. Expanded PLA Bead Foaming: Analysis of Crystallization Kinetics and Development of a Novel Technology [PhD thesis]. University of Toronto; 2013. |
0 |
0 |
| 2013 |
Xu M. Development of Lightweight, Biodegradable Plastic Foam Fibres With Poly (lactic) Acid-Clay Nanocomposites [Master's thesis]. University of Toronto; 2013. |
1 |
0 |
| 2013 |
Jung PU. Development of Innovative Gas-Assisted Foam Injection Molding Technology [PhD thesis]. University of Toronto; 2013. |
0 |
0 |
| 2013 |
Hasan MM. A Systematic Study of Solubility of Physical Blowing Agents and Their Blends in Polymers and Their Nanocomposites [PhD thesis]. University of Toronto; 2013. |
1 |
0 |
| 2012 |
Wong AT. In Situ Observation of Plastic Foaming Under Static Condition, Extensional Flow and Shear Flow [PhD thesis]. University of Toronto; 2012. |
2 |
0 |
| 2012 |
Naeini AT. Visualization of the Crystallization in Foam Extrusion Process [Master's thesis]. University of Toronto; 2012. |
0 |
0 |
| 2012 |
Mahmood S. A Thermodynamic Investigation of the PVT, Solubility and Surface Tension of Polylactic Acid (PLA)/CO₂ Mixtures [Master's thesis]. University of Toronto; 2012. |
0 |
0 |
| 2012 |
Chen N. The Effects of Crosslinking on Foaming of EVA [PhD thesis]. University of Toronto; 2012. |
1 |
1 |
| 2010 |
Zhang H. Scale-Up of Extrusion Foaming Process for Manufacture of Polystyrene Foams Using Carbon Dioxide [Master's thesis]. University of Toronto; 2010. |
0 |
0 |
| 2010 |
Lin K. Development of High Strength Microcellular Foams Using Polyether Block Amide [Master's thesis]. University of Toronto; 2010. |
0 |
0 |
| 2010 |
Lee EK. Novel Manufacturing Processes for Polymer Bead Foams [PhD thesis]. University of Toronto; 2010. |
3 |
1 |
| 2009 |
Wang J. Rheology of Foaming Polymers and Its Influence on Microcellular Processing [PhD thesis]. University of Toronto; 2009. |
2 |
0 |
| 2009 |
Leung SNS. Mechanisms of Cell Nucleation, Growth, and Coarsening in Plastic Foaming: Theory, Simulation, and Experiment [PhD thesis]. University of Toronto; 2009. |
4 |
1 |
| 2008 |
Li YGG. Development of a Novel Visualization and Measurement Apparatus for the PVT Behaviours of Polymer/gas Solutions [PhD thesis]. University of Toronto; 2008. |
9 |
0 |
| 2008 |
Lee YH. Foaming of Wood Flour/polyolefin/layered Silicate Composites [PhD thesis]. University of Toronto; 2008. |
1 |
0 |
| 2006 |
Lee C-DP. Extrusion Processing of Low-Bulk Density, Microcellular, Open-Cell Thermoplastic Foams [PhD thesis]. University of Toronto; 2006. |
0 |
0 |
| 2014 |
Lee JH. The Effect of Rigid Amorphous Fraction on the Solubility of Physical Blowing Agents in Semi-Crystalline Polymers [Master's thesis]. University of Toronto; November 2014. |
0 |
0 |
| 2003 |
Pop-Iliev R. Processing Integral-Skin Polyolefin Foams in Single-Charge Rotational Foam Molding [PhD thesis]. University of Toronto; 2003. |
0 |
0 |
| 2003 |
Rizvi GM. Development of Extrusion Processing Technology for Manufacture of Fine-Celled Plastic/wood-Fiber Composite Foams [PhD thesis]. University of Toronto; 2003. |
0 |
0 |
| 2001 |
Richards EV. Design of an Apparatus to Measure Gas Solubilities in Polymers [Master's thesis]. University of Toronto; 2001. |
0 |
0 |
| 2001 |
Naguib HE. Extrusion Processing for Manufacture of Low-Density, Fine-Celled Polypropylene Foams [PhD thesis]. University of Toronto; 2001. |
1 |
0 |
| 1999 |
Zak G. Rapid Layered Manufacturing of Short-Fibre-Reinforced Parts [PhD thesis]. University of Toronto; 1999. |
0 |
0 |
| 1999 |
Ladin D. Study of the Rheological Properties of Polymer/gas Solutions Based on a Foam Extrusion System [Master's thesis]. University of Toronto; 1999. |
0 |
0 |
| 1998 |
Behravesh AH. Extrusion Processing of Low-Density Microcellular Foams [PhD thesis]. University of Toronto; 1998. |
1 |
0 |