| 2022 |
Tariq M. Development and Characterization of Electrically Conductive Thermoplastic Based Composite Materials for Fuel Cell Bipolar Plates [PhD thesis]. University of Ontario Institute of Technology; August 2022. |
0 |
0 |
| 2021 |
Utkarsh. Development of Polymeric Nano-Composite Fiber Based Structures for Acoustics and Filtration Applications [PhD thesis]. University of Ontario Institute of Technology; August 2021. |
0 |
0 |
| 2021 |
Karimipour Fard P. Additive Manufactured Biodegradable and Biocompatible Polymeric Nanocomposite Scaffolds for Bone Tissue Engineering Applications [PhD thesis]. University of Ontario Institute of Technology; August 2021. |
0 |
0 |
| 2019 |
Pao WY. Design and Development of Hydrophobic and Protective Polymer-Based Spray Coatings for Treating Glass Surfaces in Building and Automotive Applications [Master's thesis]. University of Ontario Institute of Technology; August 2019. |
0 |
0 |
| 2019 |
Dundar C. Reinforcing Effect of PVDF/MWCNTs Nanofibers on Dental Resin Based Composites [Master's thesis]. University of Ontario Institute of Technology; January 2019. |
0 |
0 |
| 2017 |
Elkasaby MA. Development of Polymer Based Nanocomposite Using Electrospinning for Sound Absorption and Isolation [PhD thesis]. University of Ontario Institute of Technology; January 2017. |
0 |
0 |
| 2016 |
Naeem ISS. Development of Thermoplastic Foams With Heterogeneous Cellular Structures for Acoustic Applications [PhD thesis]. University of Ontario Institute of Technology; August 2016. |
0 |
0 |
| 2016 |
Azhar MS. Evaluation of the Effects of Molten CuCl on Corrosion Resistant Coatings [Master's thesis]. University of Ontario Institute of Technology; December 2016. |
0 |
0 |
| 2015 |
Rasel SM. An Advanced Electrospinning Method of Fabricating Nanofibrous Patterned Architectures With Controlled Deposition and Desired Alignment [PhD thesis]. University of Ontario Institute of Technology; November 18, 2015. |
1 |
0 |
| 2015 |
Meshkinfam F. Design and Simulation of MEMS-Based Insulin Micro-Pump With Integrated Micro-Needle Array [Master's thesis]. University of Ontario Institute of Technology; November 2015. |
0 |
0 |
| 2015 |
Al-Sadi J. Colour Mismatch in Compounding of Plastics: Processing Issues and Rheological Effects [PhD thesis]. University of Ontario Institute of Technology; 2015. |
0 |
0 |
| 2015 |
Ahmed S. Investigation of Factors That Influence Coloration in Polycarbonate Based Compounded Plastics [PhD thesis]. University of Ontario Institute of Technology; August 2015. |
0 |
0 |
| 2014 |
Azarbayjani K. System for Evaluating Effects of Immersion in Molten Copper Chloride Salts on Corrosion Resistant Coatings [Master's thesis]. University of Ontario Institute of Technology; February 2014. |
1 |
0 |
| 2012 |
Siantar E. Study of the Effect of Molten CuCl Immersion Test on Alloys With High Ni-Content With and Without Surface Coatings [Master's thesis]. University of Ontario Institute of Technology; April 2012. |
2 |
0 |
| 2011 |
Talimi M. Characterization of Natural Fibre Reinforced Biodegradable Composites [Master's thesis]. University of Ontario Institute of Technology; August 2011. |
1 |
0 |
| 2011 |
Rabbani M. Plastic Color Mismatch: Effect of Formulation and Processing Parameter [Master's thesis]. University of Ontario Institute of Technology; May 2011. |
0 |
0 |
| 2010 |
Islam MR. Profile Extrusion of Wood Plastic Cellular Composites and Formulation Evaluation Using Compression Molding [Master's thesis]. University of Ontario Institute of Technology; May 2010. |
2 |
0 |
| 2009 |
Semeralul HO. Advancing the Technology Development for Better Quality Wood Plastic Composites: Process Ability Study [Master's thesis]. University of Ontario Institute of Technology; March 2009. |
0 |
0 |