The effects of crosslinking on EVA foaming are studied in this thesis. A fundamental approach was applied to describe the influences of crosslinking on EVA/gas viscosities, gas solubility and diffusivity in EVA, EVA foaming nucleation and early stage of bubble growth, which leads to a better understanding of the plastic foaming mechanism.

Although crosslinked polyolefin foaming technology has been well applied in industry, more fundamental and thorough studies are demanded to understand the mechanism, which can serve to improve the present technology. The shear and extensional viscosities have been measured for the chemically crosslinked EVA with dissolved gas which could not be found from literature. Furthermore, by controlling the crosslinking agent amount, the polymer melt strength/viscosity can be controlled, so as to obtain optimum foam morphology. The crosslinking also has effects on the diffusivity and solubility of a blowing agent inside EVA. The solubility and the diffusivity of the blowing agent in the EVA decrease with the crosslinking degree increases. The diffusivity decrease makes more gas is utilized for the foaming rather than leak out of the polymer matrix quickly.

This thesis also presents the fundamental studies on the effects of crosslinking on cell nucleation and early bubble growth. Theoretical work and in-situ visualization experimental results indicate that partial crosslinking leads to higher cell nucleation density and slower bubble growth, both of which benefit a fine-cell foam morphology generation.

Last but not least, an optimized foaming process was conducted to produce chemically crosslinked EVA foams with large expansion ratios in a batch system, using a chemical blowing agent. The results determine that an optimal crosslinking degree is critical for the crosslinked EVA foaming with maximum expansion ratio. Furthermore, all research results not only benefit the foaming of crosslinked EVA, but also serve the better production of other crosslinked polyolefin foams.