Importance of individual rods and plates in the assessment of bone quality and their contribution to bone stiffness

wbldb

Stauber, Martin¹; Rapillard, Laurent²; van Lenthe, G. Harry¹; Zysset, Philippe²; Müller, Ralph¹

Importance of individual rods and plates in the assessment of bone quality and their contribution to bone stiffness

J Bone Miner Res. April 2006;21(4):586-595

©2006 American Society for Bone and Mineral Research

Affiliations

¹Institute for Biomedical Engineering, Swiss Federal Institute of Technology (ETH) and University of Zürich, Zu ̈ rich, Switzerland

²Laboratory of Applied Mechanics and Reliability, Swiss Federal Institute of Technology Lausanne (EPFL), Lausanne, Switzerland
Abstract and keywords

Local morphometry based on the assessment of individual rods and plates was applied to 42 human vertebral trabecular bone samples. Results showed that multiple linear regression models based on local morphometry as a measure for bone microstructure helped improving our understanding of the role of local structural changes in the determination of bone stiffness as assessed from direct and computational biomechanics.

Introduction: In a recent study, we proposed a method for local morphometry of trabecular bone, i.e., morphometry as applied to individual rods and plates. In this study, we used this method to study the relative importance of local morphometry in the assessment of bone architecture and its relative contribution to the stiffness of human vertebral bone.

Materials and Methods: We extracted 42 human trabecular bone autopsies from nine intact spinal columns. The cylindrical samples were imaged with μCT to assess bone microstructure. From these images, global and local morphometric indices were derived and related to Young's modulus as assessed by experimental uniaxial compression testing (E_meas) and computational finite element analysis (E_FE).

Results: We found the best single predictor for Young's modulus to be apparent bone volume density (BV/TV), which explained 89% of the variance in EFE when fitted with a power law. A multiple linear regression model combining mean trabecular spacing (Tb.Sp), mean slenderness of the rods (), and the relative amount of rod volume to total bone volume (Ro.BV/BV) was able to explain 90% of the variance in EFE. This model could not be improved by adding BV/TV as an independent variable. Furthermore, we found that mean trabecular thickness of the rods was significantly related to EFE (r² = 0.42), whereas mean trabecular thickness of plates had no correlation to Young's modulus. Because the globally determined trabecular thickness does not discriminate between rods and plates, this index had only a poor predictive power for EFE (r² = 0.09), showing the importance of local analysis of individual rods and plates.

Conclusions: From these results, we conclude that models based on local morphometry help improving our understanding of the relative importance of local structural changes in the determination of the stiffness of bone. Separate analysis of individual rods and plates may help to better predict age and disease‐related fractures as well as to shed new light on the effect of pharmaceutical intervention in the prevention of such fractures beyond BMD.

Keywords: local morphometry; Young’s modulus; finite element method; bone quality; trabecular bone;trabecular plates; trabecular rods; vertebrae
Links

DOI: 10.1359/JBMR.060102

PubMed: 16598379

WoS: 000236343800013
History

Received: 2005-07-05

Revised: 2005-12-12

Accepted: 2005-12-29

Cited Works (40)

Year	Entry
2006	Khosla S, Riggs BL, Atkinson EJ, Oberg AL, McDaniel LJ, Holets M, .Peterson JM, Melton LJ III. Effects of sex and age on bone microstructure at the ultradistal radius: a population-based noninvasive in vivo assessment. J Bone Miner Res. January 2006;21(1):124-131.
1995	Riggs BL, Melton LJ III. The worldwide problem of osteoporosis: insights afforded by epidemiology. Bone. November 1995;17(5)(suppl 1):S505-S511.
1996	Saha PK, Chaudhuri BB. 3D digital topology under binary transformation with applications. Comput Vis Image Und. May 1996;63(3):418-429.
1997	Saha PK, Chaudhuri BB, Dutta Majumder D. A new shape preserving parallel thinning algorithm for 3D digital images. Pattern Recognit. December 1997;30(2):1939-1955.
1985	Kleerekoper M, Villanueva AR, Stanciu J, Rao DS, Parfitt AM. The role of three-dimensional trabecular microstructure in the pathogenesis of vertebral compression fractures. Calcif Tiss Int. 1985;37(6):594-597.
2000	Saha PK, Gomberg BR, Wehrli FW. Three-dimensional digital topological characterization of cancellous bone architecture. Int J Imaging Syst Technol. 2000;11(1):81-90.
1999	Laib A, Rüegsegger P. Calibration of trabecular bone structure measurements of in vivo three-dimensional peripheral quantitative computed tomography with 28-μm-resolution microcomputed tomography. Bone. January 1999;24(1):35-39.
1994	Keaveny TM, Guo XE, Wachtel EF, McMahon TA, Hayes WC. Trabecular bone exhibits fully linear elastic behavior and yields at low strains. J Biomech. 1994;27(9):1127-1136.
1994	Goulet RW, Goldstein SA, Ciarelli MJ, Kuhn JL, Brown MB, Feldkamp LA. The relationship between the structural and orthogonal compressive properties of trabecular bone. J Biomech. April 1994;27(4):375-389.
2005	Boutroy S, Bouxsein ML, Munoz F, Delmas PD. In vivo assessment of trabecular bone microarchitecture by high-resolution peripheral quantitative computed tomography. J Clin Endocrinol Metab. December 2005;90(12):6508-6515.
2001	Keaveny TM, Morgan EF, Niebur GL, Yeh OC. Biomechanics of trabecular bone. Annu Rev Biomed Eng. 2001;3:307-333.
1976	Carter DR, Hayes WC. Bone compressive strength: the influence of density and strain rate. Science. September 10, 1976;194(4270):1174-1176.
1998	Kopperdahl DL, Keaveny TM. Yield strain behavior of trabecular bone. J Biomech. July 1998;31(7):601-608.
1994	Müller R, Hildebrand T, Rüegsegger P. Non-invasive bone biopsy: a new method to analyse and display the three-dimensional structure of trabecular bone. Phys Med Biol. January 1994;39(1):145-164.
1995	Müller R, Rüegsegger P. Three-dimensional finite element modelling of non-invasively assessed trabecular bone structures. Med Eng Phys. March 1995;17(2):126-133.
1997	Hildebrand T, Rüegsegger P. Quantification of bone microarchitecture with the structure model index. Comput Methods Prog Biomed. 1997;1(1):15-23.
1977	Carter DR, Hayes WC. The compressive behavior of bone as a two-phase porous structure. J Bone Joint Surg. 1977;59A(7):954-962.
1994	Keller TS. Predicting the compressive mechanical behavior of bone. J Biomech. September 1994;27(9):1159-1168.
2003	Judex S, Boyd S, Qin Y-X, Miller L, Müller R, Rubin C. Combining high-resolution micro-computed tomography with material composition to define the quality of bone tissue. Curr Osteoporos Rep. June 2003;1(1):11-19.
1988	Rice JC, Cowin SC, Bowman JA. On the dependence of the elasticity and strength of cancellous bone on apparent density. J Biomech. 1988;21(2):155-168.
1983	Parfitt AM, Mathews CH, Villanueva AR, Kleerekoper M, Frame B, Rao DS. Relationships between surface, volume, and thickness of iliac trabecular bone in aging and in osteoporosis: implications for the microanatomic and cellular mechanisms of bone loss. J Clin Invest. October 1983;72(4):1396-1409.
1987	Parfitt AM, Drezner MK, Glorieux FH, Kanis JA, Malluche H, Meunier PJ, Ott SM, Recker RR. Bone histomorphometry: standardization of nomenclature, symbols, and units: report of the ASBMR histomorphometry nomenclature committee. J Bone Miner Res. December 1987;2(6):595-610.
1993	Turner CH, Burr DB. Basic biomechanical measurements of bone: a tutorial. Bone. 1993;14(4):595-608.
1997	Hildebrand T, Rüegsegger P. A new method for the model-independent assessment of thickness in three-dimensional images. J Microsc (Oxford). 1997;185(1):67-75.
2000	Pothuaud L, Porion P, Lespessailles E, Benhamou CL, Levitz P. A new method for three-dimensional skeleton graph analysis of porous media: application to trabecular bone microarchitecture. J Microsc (Oxford). August 2000;199(pt 2):149-161.
2002	Pothuaud L, Van Rietbergen B, Mosekilde L, Beuf O, Levitz P, Benhamou CL, Majumdar S. Combination of topological parameters and bone volume fraction better predicts the mechanical properties of trabecular bone. J Biomech. August 2002;35(8):1091-1099.
1994	Hollister SJ, Brennan JM, Kikuchi N. A homogenization sampling procedure for calculating trabecular bone effective stiffness and tissue level stres. J Biomech. 1994;27(4):433-444.
1994	Keaveny TM, Wachtel EF, Ford CM, Hayes WC. Differences between the tensile and compressive strengths of bovine tibial trabecular bone depend on modulus. J Biomech. 1994;27(9):1137-1146.
1999	Niebur GL, Yuen JC, Hsia AC, Keaveny TM. Convergence behavior of high-resolution finite element models of trabecular bone. J Biomech Eng. December 1999;121(6):629-635.
1994	Fyhrie DP, Schaffler MB. Failure mechanisms in human vertebral cancellous bone. Bone. 1994;15(1):105-109.
1995	van Rietbergen B, Weinans H, Huiskes R, Odgaard A. A new method to determine trabecular bone elastic properties and loading using micromechanical finite-element models. J Biomech. January 1995;28(1):69-81.
2002	Boyd SK, Müller R, Zernicke RF. Mechanical and architectural bone adaptation in early stage experimental osteoarthritis. J Bone Miner Res. April 2002;17(4):687-694.
1991	Odgaard A, Linde F. The underestimation of Young's modulus in compressive testing of cancellous bone specimens. J Biomech. 1991;24(8):691-698.
1997	Odgaard A. Three-dimensional methods for quantification of cancellous bone architecture. Bone. 1997;20(4):315-328.
1992	Hahn M, Vogel M, Pompesius-Kempa M, Delling G. Trabecular bone pattern factor: a new parameter for simple quantification of bone microarchitecture. Bone. 1992;13(4):327-330.
1992	Linde F, Hvid I, Madsen F. The effect of specimen geometry on the mechanical behaviour of trabecular bone specimens. J Biomech. 1992;25(4):359-368.
1993	Odgaard A, Gundersen HJG. Quantification of connectivity in cancellous bone, with special emphasis on 3-D reconstructions. Bone. March–April 1993;14(2):173-182.
2003	Zysset PK. A review of morphology–elasticity relationships in human trabecular bone: theories and experiments. J Biomech. October 2003;36(10):1469-1485.
1993	Keaveny TM, Hayes WC. A 20-year perspective on the mechanical properties of trabecular bone. J Biomech Eng. November 1993;115(4B):534-542.
1993	Keaveny TM, Borchers RE, Gibson L, Hayes WC. Trabecular bone modulus and strength can depend on specimen geometry. J Biomech. August 1993;26(8):991-995.

Cited By (36)

Year	Entry
2009	Mueller TL, Stauber M, Kohler T, Eckstein F, Müller R, van Lenthe GH. Non-invasive bone competence analysis by high-resolution pQCT: an in vitro reproducibility study on structural and mechanical properties at the human radius. Bone. February 2009;44(2):364-371.
2009	Liu XS, Zhang XH, Guo XE. Contributions of trabecular rods of various orientations in determining the elastic properties of human vertebral trabecular bone. Bone. August 2009;45(2):158-163.
2009	Mueller TL, van Lenthe GH, Stauber M, Gratzke C, Eckstein F, Müller R. Regional, age and gender differences in architectural measures of bone quality and their correlation to bone mechanical competence in the human radius of an elderly population. Bone. November 2009;45(5):882-891.
2011	Schneider P, Meier M, Wepf R, Müller R. Serial FIB/SEM imaging for quantitative 3D assessment of the osteocyte lacuno-canalicular network. Bone. August 2011;49(2):304-311.
2013	Thomsen JS, Niklassen AS, Ebbesen EN, Brüel A. Age-related changes of vertical and horizontal lumbar vertebral trabecular 3D bone microstructure is different in women and men. Bone. November 2013;57(1):47-55.
2020	Jin Y, Zhang T, Cheung JPY, Wong TM, Feng X, Sun T, Zu H, Sze KY, Lu WW. A novel mechanical parameter to quantify the microarchitecture effect on apparent modulus of trabecular bone: a computational analysis of ineffective bone mass. Bone. June 2020;135:115314.
2021	Li Y, Tseng W-J, de Bakker CMJ, Zhao H, Chung R, Liu XS. Peak trabecular bone microstructure predicts rate of estrogen-deficiency-induced bone loss in rats. Bone. April 2021;145:115862.
2018	Zhao S, Arnold M, Ma S, Abel RL, Cobb JP, Hansen U, Boughton O. Standardizing compression testing for measuring the stiffness of human bone. Bone Joint Res. August 2018;7(8):524-538.
2019	Georgiou L, Kivell TL, Pahr DH, Buck LT, Skinner MM. Trabecular architecture of the great ape and human femoral head. J Anat. May 2019;234(5):679-693.
2009	Liu XS, Bevill G, Keaveny TM, Sajda P, Guo XE. Micromechanical analyses of vertebral trabecular bone based on individual trabeculae segmentation of plates and rods. J Biomech. February 9, 2009;42(3):249-256.
2011	Vanderoost J, Jaecques SVN, Perre GVd, Boonen S, D'hooge J, Lauriks W, Lenthe GHv. Fast and accurate specimen-specific simulation of trabecular bone elastic modulus using novel beam–shell finite element models. J Biomech. May 17, 2011;44(8):1566-1572.
2015	Oftadeh R, Perez-Viloria M, Villa-Camacho JC, Vaziri A, Nazarian A. Biomechanics and mechanobiology of trabecular bone: a review. J Biomech Eng. January 2015;137(1):010802.
2008	Liu XS, Sajda P, Saha PK, Wehrli FW, Bevill G, Keaveny TM, Guo XE. Complete volumetric decomposition of individual trabecular plates and rods and its morphological correlations with anisotropic elastic moduli in human trabecular bone. J Bone Miner Res. February 2008;23(2):223-235.
2015	Maquer G, Musy SN, Wandel J, Gross T, Zysset PK. Bone volume fraction and fabric anisotropy are better determinants of trabecular bone stiffness than other morphological variables. J Bone Miner Res. June 2015;30(6):1000-1008.
2021	Ding M, Overgaard S. 3-D microarchitectural properties and rod- and plate-like trabecular morphometric properties of femur head cancellous bones in patients with rheumatoid arthritis, osteoarthritis, and osteoporosis. J Orthop Translat. May 2021;28:159-168.
2007	Skedros JG, Baucomb SL. Mathematical analysis of trabecular “trajectories” in apparent trajectorial structures: the unfortunate historical emphasis on the human proximal femur. J Theo Biol. January 7, 2007;244(1):15-45.
2011	Lorenzetti S, Carretta R, Müller R, Stüssi E. A new device and method for measuring the elastic modulus of single trabeculae. Med Eng Phys. October 2011;33(8):993-1000.
2015	Thomsen JS, Jensen MV, Niklassen AS, Ebbesen EN, Brüel A. Age-related changes in vertebral and iliac crest 3D bone microstructure: differences and similarities. Osteoporos Int. January 2015;26(1):219-228.
2021	Felder AA, Monzem S, De Souza R, Javaheri B, Mills D, Boyde A, Doube M. The plate-to-rod transition in trabecular bone loss is elusive. R Soc Open Sci. June 9, 2021;8(5):201401.
2007	Liu XS. High-Resolution Image Based Micro-Mechanical Modeling of Trabecular Bone [PhD thesis]. Columbia University; 2007.
2010	Zhang XH. High Resolution Imaging Based Patient Specific Biomechanical Assessment of Bone Quality [PhD thesis]. Columbia University; 2010.
2011	Donaldson FE. On Incorporating Bone Microstructure in Macro-Finite-Element Models [PhD thesis]. Edinburgh, UK: University of Edinburgh; March 2011.
2010	Müller T. Bioimaging and Biomechanics of Bone Competence and Implant Stability [PhD thesis]. Swiss Federal Institute of Technology Zürich; 2010.
2014	Carretta R. Post-Yield Mechanics and Material Composition of Single Trabeculae: A Combined Experimental and Modelling Approach [PhD thesis]. Swiss Federal Institute of Technology Zürich; 2014.
2019	Du J. Mechanical Adaptation of Human Trabecular Bone: Experimental and Computational Study [PhD thesis]. Loughborough University; 2019.
2015	Oftadeh R. Hierarchical Analysis and Multiscale Modelling of Cellular Structures: From Meta Materials to Bone Structure [PhD thesis]. Northeastern University; December 2015.
2011	Ahmed F. Multiscale Quantitative Imaging of Human Femoral Heads Using X-Ray Microtomography [PhD thesis]. Queen Mary University of London; 2011.
2013	Morton JJ. An Investigation of Rat Vertebra Failure Behaviour Under Uniaxial Compression Through Time-Lapsed Micro-CT Imaging [Master's thesis]. Queen's University; 2013.
2009	Alwood JS. Radiation and Mechanical Unloading Effects on Mouse Vertebral Bone: Ground-Based Models of the Spaceflight Environment [PhD thesis]. Stanford University; September 2009.
2022	Davis RA. Investigating the Effects of Aging and Prolonged Opioid Use on Bone Histomorphometry, Quality, and Biomechanics [PhD thesis]. University of Akron; August 2022.
2010	Fields AJ. Trabecular Microarchitecture, Endplate Failure, and the Biomechanics of Human Vertebral Fractures [PhD thesis]. Berkeley, CA: Berkeley, University of California; 2010.
2016	Chen C. Mechanical and Micro-Structural Modeling of Trabecular Bone by in Vivo Imaging [PhD thesis]. University of Iowa; December 2016.
2007	Ruffoni D. Modeling of Material and Architectural Quality of Trabecular Bone [PhD thesis]. Liège, Belgique: Université de Liège; September 2007.
2020	Patton DM. Changes in Femoral Structure and Function Following Anterior Cruciate Ligament Injury and With Aging [PhD thesis]. University of Michigan; 2020.
2021	Li Y. Adaptation of Maternal Skeletal Mechano-Responsiveness, Osteocyte Microenvironment, and Bone Marrow Adipocytes in Response to Reproduction and Lactation [PhD thesis]. Philadelphia, PA: University of Pennsylvania; 2021.
2021	Kusins J. A Multi-Level Mechanical Assessment of the Shoulder Coupled With Evaluation of Upper Extremity Predictive Finite Element Models [PhD thesis]. University of Western Ontario; 2021.