Load sharing within a human lumbar vertebral body using the finite element method

wbldb

Cao, Khoa D.¹; Grimm, Michele J.¹; Yang, King-Hay¹

Load sharing within a human lumbar vertebral body using the finite element method

Spine. June 5, 2001;26(12):E253-E260

©2001 Lippincott Williams & Wilkins, Inc.

Affiliations

¹Bioengineering Center, Wayne State University, Detroit, Michigan
Abstract and keywords

Study Design: A finite element parametric study was performed to investigate the structural roles of the vertebral cortical shell and the trabecular centrum.

Objectives: To address the debated issue of the relative load-carrying role of the vertebral cortical shell.

Summary of Background Data: Several experimental and computational studies have been aimed at quantifying the load-carrying roles of the human vertebral cortical shell and trabecular centrum. These studies, however, have supported no consensus.

Methods: A finite element model of three lumbar vertebral bodies was developed to predict the fraction of the total compressive load acting on the lumbar vertebral body, under two different loading conditions, that was supported by the cortical shell. Parametric variations in vertebral material and geometric properties were examined to determine how this fraction was influenced by such changes.

Results: The fraction of the compressive load supported by the cortical shell was found to be strongly dependent on the distance from the endplate, increasing from about 34% at either endplate to approximately 63% at the midtransverse plane. This fraction was independent of the loading characteristics, proportional to the properties of the cortex, and inversely proportional to the modulus of the centrum. Additionally, the cortical shell force fraction was affected significantly by changes in the overall vertebral geometry.

Conclusions: Our findings indicate that the structural dominance of the cortical shell and centrum alternate depending on the location within the vertebral body. However, as age-related bone loss progresses, the load-carrying role of the cortical shell could increase significantly.

Keywords: biomechanics; vertebrae; lumbar spine; cortical shell; trabecular centrum; cortical curvature; endplate curvature
Links

DOI: 10.1097/00007632-200106150-00011

PubMed: 11426165
History

Received: 2000-02-21

Revised: 2000-06-06

Accepted: 2001-02-13

Cited Works (25)

Year	Entry
1970	Yamada H. Strength of Biological Materials. Evans FG, ed. Baltimore, MD: Williams & Wilkins Company; 1970.
1984	Shirazi-Adl SA, Shrivastava SC, Ahmed A. Stress analysis of the lumbar disc-body unit in compression: a three-dimensional nonlinear finite element study. Spine. March 1984;9(2):120-134.
1993	Mizrahi J, Silva MJ, Keaveny TM, Edwards WT, Hayes WC. Finite-element stress analysis of the normal and osteoporotic lumbar vertebral body. Spine. October 15, 1993;18(14):2088-2096.
1980	Adams MA, Hutton WC. The effect of posture on the role of the apophysial joints in resisting intervertebral compressive forces. J Bone Joint Surg. August 1980;62B(3):358-362.
1988	Yoganandan N, Myklebust JB, Cusick JF, Wilson CR, Sances A Jr. Functional biomechanics of the thoracolumbar vertebral cortex. Clin Biomech (Bristol, Avon). February 1988;3(1):11-18.
1979	Hakim NS, King AI. A three dimensional finite element dynamic response analysis of a vertebra with experimental verification. J Biomech. 1979;12(4):277-292.
1984	Yang KH, King AI. Mechanism of facet load transmission as a hypothesis for low-back pain. Spine. September 1984;9(6):557-565.
1986	Shirazi-Adl A, Ahmed AM, Shrivastava SC. Mechanical response of a lumbar motion segment in axial torque alone and combined with compression. Spine. November 1986;11(9):914-927.
1997	Silva MJ, Keaveny TM, Hayes WC. Load sharing between the shell and centrum in the lumbar vertebral body. Spine. January 1997;22(2):140-150.
1991	Faulkner KG, Cann CE, Hasegawa BH. Effect of bone distribution on vertebral strength: assessment with patient-specific nonlinear finite element analysis. Radiology. June 1991;179(3):669-674.
1977	Carter DR, Hayes WC. The compressive behavior of bone as a two-phase porous structure. J Bone Joint Surg. 1977;59A(7):954-962.
1976	Wu H-C, Yao R-F. Mechanical behavior of the human annulus fibrosus. J Biomech. 1976;9(1):1-7.
1972	Markolf KL. Deformation of the thoracolumbar intervertebral joints in response to external loads: a biomechanical study using autopsy material. J Bone Joint Surg. April 1972;54A(3):511-533.
1985	McBroom RJ, Hayes WC, Edwards WT, Goldberg RP, White AA III. Prediction of vertebral body compressive fracture using quantitative computed tomography. J Bone Joint Surg. 1985;67A(8):1206-1214.
1974	Prasad P, King AI, Ewing CL. The role of articular facets during +G_z acceleration. J Appl Mech. June 1974;41(2):321-326.
1992	Lavaste F, Skalli W, Robin S, Roy-Camille R, Mazel C. Three-dimensional geometrical and mechanical modelling of the lumbar spine. J Biomech. October 1992;25(10):1153-1164.
1960	Nachemson A. Lumbar intradiscal pressure: experimental studies on post-mortem material. Acta Orthop Scand. 1960;31(suppl 43):1-104.
1957	Brown T, Hansen RJ, Yorra AJ. Some mechanical tests on the lumbosacral spine with particular reference to the intervertebral discs: a preliminary report. J Bone Joint Surg. October 1957;39A(5):1135-1164.
1966	Nachemson A. The load on lumbar disks in different positions of the body. Clin Orthop Relat Res. March–March 1966;45:107-122.
1951	Virgin WJ. Experimental investigations into the physical properties of the intervertebral disc. J Bone Joint Surg. November 1951;33B(4):607-611.
1987	Ueno K, Liu YK. A three-dimenstional nonlinear finite element model of lumbar intervertebral joint in torsion. J Biomech Eng. August 1987;109(3):200-209.
1969	Rockoff SD, Sweet E, Bleustein J. The relative contribution of trabecular and cortical bone to the strength of human lumbar vertebrae. Calcif Tiss Res. December 1969;3(1):163-175.
1981	Schultz AB, Andersson GBJ. Analysis of loads on the lumbar spine. Spine. January–February 1981;6(1):76-82.
1991	Vesterby A, Mosekilde L, Gundersen HJG, Melsen F, Mosekilde L, Holme K, Sørensen S. Biologically meaningful determinants of the in vitro strength of lumbar vertebrae. Bone. 1991;12(3):219-224.
1988	Biggemann M, Hilweg D, Brinckmann P. Prediction of the compressive strength of vertebral bodies of the lumbar spine by quantitative computed tomography. Skeletal Radiol. June 1988;17(4):264-269.

Cited By (23)

Year	Entry
2007	Kim D-G, Hunt CA, Zauel R, Fyhrie DP, Yeni YN. The effect of regional variations of the trabecular bone properties on the compressive strength of human vertebral bodies. Ann Biomed Eng. November 2007;35(11):1907-1913.
2007	Hulme PA, Boyd SK, Ferguson SJ. Regional variation in vertebral bone morphology and its contribution to vertebral fracture strength. Bone. December 2007;41(6):946-957.
2008	Yeni YN, Zelman EA, Divine GW, Kim D-G, Fyhrie DP. Trabecular shear stress amplification and variability in human vertebral cancellous bone: relationship with age, gender, spine level and trabecular architecture. Bone. March 2008;42(3):591-596.
2020	Ely EV, Osipov B, Emami AJ, Christiansen BA. Region-dependent bone loss in the lumbar spine following femoral fracture in mice. Bone. November 2020;140:115555.
2022	Yeni YN, Dix MR, Xiao A, Oravec DJ, Flynn MJ. Measuring the thickness of vertebral endplate and shell using digital tomosynthesis. Bone. April 2022;157:116341.
2007	Eswaran SK, Bayraktar HH, Adams MF, Gupta A, Hoffmann PF, Lee DC, Papadopoulos P, Keaveny TM. The micro-mechanics of cortical shell removal in the human vertebral body. Comput Meth Appl Mech Eng. June 15, 2007;196(31-32):3025-3032.
2006	Eswaran SK, Gupta A, Adams MF, Keaveny TM. Cortical and trabecular load sharing in the human vertebral body. J Bone Miner Res. February 2006;21(2):307-314.
2003	Bredbenner TL. Damage Modeling of Vertebral Trabecular Bone [PhD thesis]. Cleveland, OH: Case Western Reserve University; January 2003.
2010	Loomis DA. A Biomechanical Analysis of Ape and Human Thoracic Vertebrae Using Quantitative Computed Tomography Based Finite Element Models [Master's thesis]. Cleveland, OH: Case Western Reserve University; January 2010.
2012	Moore E. The Frequency, Aqueous Solution, Stress Amplitude, Temperature (FAST) Machine: A Device Proposed for Accelerated Fatigue Testing of Cortical Bone [Master's thesis]. Cleveland, OH: Case Western Reserve University; August 2012.
2020	Taylor EA. Validation and Implementation of Vibrational Spectroscopic Measures of Bone Composition [PhD thesis]. Ithaca, NY: Cornell University; December 2020.
2015	Ramcharan MA. Development of Functional Interactions Among Cortical and Trabecular Traits During Growth of the Lumbar Vertebral Body [PhD thesis]. New York, NY: The City University of New York; 2015.
2016	Spurrier EJ. Spinal Injury in Underbody Blast [MD thesis]. Imperial College London; 2016.
2011	Driscoll M. Design, Optimization, and Evaluation of a Fusionless Device to Induce Growth Modulation and Correct Spinal Curvatures in Adolescent Idiopathic Scoliosis [PhD thesis]. École polytechnique de Montréal; June 2011.
2016	Hachem B. Porcine Spine Finite Element Model of Progressive Experimental Scoliosis and Assessment of a New Dual-Epiphyseal Growth Modulating Implant [PhD thesis]. École polytechnique de Montréal; April 2016.
2017	Cobetto N. Planification chirurgicale pour la correction 3D de la scoliose pédiatrique progressive à l'aide d'un dispositif sans fusion flexible [PhD thesis]. École polytechnique de Montréal; June 2017.
2019	Beltejar M-JG. Understanding the Genetic Basis for Bone-Matrix Quality [PhD thesis]. University of Rochester; 2019.
2005	George WT. Multiaxial Fracture Characteristics of Aging Human Bone [PhD thesis]. Troy, NY: Rensselaer Polytechnic Institute; April 2005.
2017	de Bakker CMJ. Structural Adaptations of the Maternal Skeleton in Response to Reproduction and Lactation [PhD thesis]. Philadelphia, PA: University of Pennsylvania; 2017.
2011	Howarth SJ. Mechanical Response of the Porcine Cervical Spine to Acute and Repetitive Anterior-Posterior Shear [PhD thesis]. University of Waterloo; 2011.
2018	Khor F. Computational Modeling of Hard Tissue Response and Fracture in the Lower Cervical Spine Under Compression Including Age Effects [Master's thesis]. University of Waterloo; 2018.
2005	Cao KD. Development of a 4-Vertebrae, Detailed Finite Element Model of Thoracolumbar Spine [PhD thesis]. Detroit, MI: Wayne State University; August 2005.
2019	Weber CIK. Structural and Tissue-Level Adaptations of Lumbar Intervertebral Discs in Humans With Inducible Low Back Pain Symptoms [PhD thesis]. St. Louis, MO: Washington University in St. Louis; December 2019.