Finite element stress analysis of an intervertebral disc

Belytschko, T.; Kulak, R. F.; Schultz, A. B.; Galante, J. O.

Affiliations

¹Department of Materials Engineering, University of Illinois at Chicago Circle, Chicago, Illinois 60680, U.S.A.

²Department of Orthopaedic Surgery, Rush-Presbyterian St. Lukes, Chicago, Illinois, U.S.A

Abstract

An axisymmetric finite element model is employed for the study of the behavior of an intervertebral disc under axial loading. By matching experimental results on the overall behavior of the disc, orthotropic linear material constants are obtained for the annulus fibrosis for various load levels. Results are then presented on the effects of material properties and geometry on the stress-distribution and intradiscal pressures. It is shown that: (1) an adequate representation of disc behavior requires the inclusion of material anisotropy; (2) material properties of the annulus obtained by direct measurement underestimate the stiffness of the material; (3) reasonable predictions of variations of disc stiffness with vertebral level can be made on the basis of geometry; and (4) degenerative changes associated with loss of elasticity have little effect on the intradiscal pressure, while annular tears result in reduced pressure in agreement with clinical observations.

Links

DOI: 10.1016/0021-9290(74)90019-0

PubMed: 4844332

WoS: A1974T641400011

History

Received: 1973-06-20

Cited Works (11)

Year	Entry
1970	Yamada H. Strength of Biological Materials. Evans FG, ed. Baltimore, MD: Williams & Wilkins Company; 1970.
1954	Hirsch C, Nachemson A. New observations on the mechanical behavior of lumbar discs. Acta Orthop Scand. 1954;23(4):254-283.
1957	Perey O. Fracture of the vertebral end-plate in the lumbar spine: an experimental biomechanical investigation. Acta Orthop Scand. 1957;28(suppl 25):1-101.
1904	Fick R. Handbuch Der Anatomie Und Mechanik Der Gelenke: Unter Berücksichtigung Der Bewegenden Muskeln. Jena: Verlag von Gustav Fischer; 1904.
1967	Galante JO. Tensile properties of the human lumbar annulus fibrosus. Acta Orthop Scand. 1967;(suppl 100):1-91.
1960	Nachemson A. Lumbar intradiscal pressure: experimental studies on post-mortem material. Acta Orthop Scand. 1960;31(suppl 43):1-104.
1957	Brown T, Hansen RJ, Yorra AJ. Some mechanical tests on the lumbosacral spine with particular reference to the intervertebral discs: a preliminary report. J Bone Joint Surg. October 1957;39A(5):1135-1164.
1972	Markolf KL. Deformation of the thoracolumbar intervertebral joints in response to external loads: a biomechanical study using autopsy material. J Bone Joint Surg. April 1972;54A(3):511-533.
1911	Fick R. Handbuch Der Anatomie Und Mechanik Der Gelenke: Unter Berücksichtigung Der Bewegenden Muskeln. Jena: Verlag von Gustav Fischer; 1911.
1966	Rolander SD. Motion of the lumbar spine with special reference to the stabilizing effect of posterior fusion: an experimental study on autopsy specimens. Acta Orthop Scand. 1966;37(suppl 90):1-144.
1970	Farfan HF, Cossette JW, Robertson GH, Wells RV, Kraus H. The effects of torsion on the lumbar intervertebral joints: the role of torsion in the production of disc degeneration. J Bone Joint Surg. April 1970;52A(3):468-497.

Cited By (68)

Year	Entry
2004	Haug E, Choi H-Y, Robin S, Beaugonin M. Human models for crash and impact simulation. In: Ayache N, ed. Computational Models for the Human Body. Amsterdam, The Netherlands: Elsevier B.V; 2004:231-452. Ciarlet PG, ed. Handbook of Numerical Analysis; vol 12.
1990	Fung YC. Biomechanics: Motion, Flow, Stress, and Growth. New York, NY: Springer-Verlag; 1990.
2007	Anderson AE, Ellis BJ, Weiss JA. Verification, validation and sensitivity studies in computational biomechanics. Comput Methods Biomech Biomed Eng. June 2007;10(3):171-184.
1976	Kulak RF, Belytschko TB, Schultz AB, Galante JO. Nonlinear behavior of the human intervertebral disc under axial load. J Biomech. 1976;9(6):377-386.
1977	Sundaram SH, Feng CC. Finite element analysis of the human thorax. J Biomech. 1977;10(8):505-516.
1978	Lin HS, Lui YK, Ray G, Nikravesh P. Systems identification for material properties of the intervertebral joint. J Biomech. 1978;11(1-2):1-14.
1980	Spilker RL. Mechanical behavior of a simple model of an intervertebral disk under compressive loading. J Biomech. 1980;13(10):895-901.
1983	Huiskes R, Chao EYS. A survey of finite element analysis in orthopedic biomechanics: the first decade. J Biomech. 1983;16(6):385-409.
1986	Shirazi-Adl A, Ahmed AM, Shrivastava S. A finite element study of a lumbar motion segment subjected to pure sagittal plane moments. J Biomech. 1986;19(4):331-350.
1989	Yoganandan N, Ray G, Pintar FA, Myklebust JB, Sances A Jr. Stiffness and strain energy criteria to evaluate the threshold of injury to an intervertebral joint. J Biomech. 1989;22(2):135-142.
1989	Shirazi-Adl A. On the fibre composite material models of disc annulus: comparison of predicted stresses. J Biomech. 1989;22(4):357-365.
1997	Iatridis JC, Setton LA, Weidenbaum M, Mow VC. The viscoelastic behavior of the non-degenerate human lumbar nucleus pulposus in shear. J Biomech. October 1997;30(10):1005-1013.
1982	Reuber M, Schultz A, Denis F, Spencer D. Bulging of lumbar intervertebral disks. J Biomech Eng. August 1982;104(3):187-192.
1985	Simon BR, Wu JSS, Carlton MW, Evans JH, Kazarian LE. Structural models for human spinal motion segments based on a poroelastic view of the intervertebral disk. J Biomech Eng. November 1985;107(4):327-335.
1986	Spilker RL, Jakobs DM, Schultz AB. Material constants for a finite element model of the intervertebral disk with a fiber composite annulus. J Biomech Eng. February 1986;108(1):1-11.
1987	Ueno K, Liu YK. A three-dimenstional nonlinear finite element model of lumbar intervertebral joint in torsion. J Biomech Eng. August 1987;109(3):200-209.
2000	Elliott DM, Setton LA. A linear material model for fiber-induced anisotropy of the anulus fibrosus. J Biomech Eng. April 2000;122(2):173-179.
2012	Maas SA, Ellis BJ, Ateshian GA, Weiss JA. FEBio: finite elements for biomechanics. J Biomech Eng. January 2012;134(1):011005.
1986	Huelke DF, Nusholtz GS. Cervical spine biomechanics: a review of the literature. J Orthop Res. 1986;4(2):232-245.
1987	Stokes IAF. Surface strain on human intervertebral discs. J Orthop Res. 1987;5(3):348-355.
1994	Bozic KJ, Keyak JH, Skinner HB, Bueff UH, Bradford DS. Three-dimensional finite element modeling of a cervical vertebra an investigation of burst fracture mechanism. J Spinal Disord. April 1994;7(2):102-110.
1981	Horst M, Brinckmann P. Measurement of the distribution of axial stress on the end-plate of the vertebral body. Spine. May–June 1981;6(3):217-232.
1984	Shirazi-Adl SA, Shrivastava SC, Ahmed A. Stress analysis of the lumbar disc-body unit in compression: a three-dimensional nonlinear finite element study. Spine. March 1984;9(2):120-134.
1986	Shirazi-Adl A, Ahmed AM, Shrivastava SC. Mechanical response of a lumbar motion segment in axial torque alone and combined with compression. Spine. November 1986;11(9):914-927.
1994	Best BA, Guilak F, Setton LA, Zhu W, Saed-Nejad F, Ratcliffe A, Weidenbaum M, Mow VC. Compressive mechanical properties of the human anulus fibrosus and their relationship to biochemical composition. Spine. January 15, 1994;19(2):212-221.
1995	Goel VK, Monroe BT, Gilbertson LG, Brinckmann P. Interlaminar shear stresses and laminae separation in a disc: finite element analysis of the L3-L4 motion segment subjected to axial compressive loads. Spine. March 15, 1995;20(6):689-698.
1995	Acaroglu ER, Iatridis JC, Setton LA, Foster RJ, Mow VC, Weidenbaum M. Degeneration and aging affect the tensile behavior of human lumbar anulus fibrosus. Spine. December 15, 1995;20(24):2690-2701.
1996	Ebara S, Iatridis JC, Setton LA, Foster RJ, Mow VC, Weidenbaum M. Tensile properties of nondegenerate human lumbar anulus fibrosus. Spine. March 15, 1996;21(4):452-461.
1996	Iatridis JC, Weidenbaum M, Setton LA, Mow VC. Is the nucleus pulposus a solid or a fluid? mechanical behaviors of the nucleus pulposus of the human intervertebral disc. Spine. May 15, 1996;21(15):1174-1184.
2015	Oxland TR. A history of spine biomechanics: focus on 20th century progress. Unfallchirurg. December 2015;118(suppl 1):80-92.
1996	Kotzar GM. Non-Invasive Estimation of Fracture Callus Properties Using a Six Degree-of-Freedom Loadcell Cleveland, OH: Case Western Reserve University; May 1996.
1996	Iatridis JC. Biomechanics of the Anulus Fibrosus and Nucleus Pulposus of the Human Lumbar Intervertebral Disc and the Effects of Degeneration [PhD thesis]. Columbia University; 1996.
2004	Joshi AB. Mechanical Behavior of the Human Lumbar Intervertebral Disc With Polymeric Hydrogel Nucleus Implant: An Experimental and Finite Element Study [PhD thesis]. Drexel University; February 2004.
2009	Massey CJ. Finite Element Analysis and Materials Characterization of Changes Due to Aging and Degeneration of the Human Intervertebral Disc [PhD thesis]. Drexel University; September 2009.
2012	Isaacs JL. Micromechanics of the Annulus Fibrosus: Role of Biomolecules in Mechanical Function [PhD thesis]. Drexel University; May 2012.
2013	Jamison D IV. Mechanical Characterization of the Human Lumbar Intervertebral Disc Subjected to Impact Loading Conditions [PhD thesis]. Drexel University; August 2013.
2016	Hollenbeck JFM. Anatomy, Implant Selection and Placement Influence Spine Mechanics Associated With Total Disc Replacement [Master's thesis]. University of Denver; June 2016.
1999	Elliott DM. The Fiber-Induced Anisotropic Material Behaviors of the Anulus Fibrosus of the Intervertebral Disc in Tension [PhD thesis]. Duke University; 1999.
2001	Baer AE. The Micromechanical Environment of Intervertebral Disc Cells [PhD thesis]. Duke University; 2001.
2008	Cao L. Micromechanics of the Pericellular Matrix and Cells in the Intervertebral Disc: Three-Dimensional Finite Element Modeling Based on in Situ Morphology [PhD thesis]. Duke University; 2008.
2002	Cheung T-mJ. A Finite Element Study of the Effects of Mechanical Loading on the Fluid Flow and Biomechanical Response of the Intervertebral Disc [Master's thesis]. Hong Kong Polytechnic University; September 2002.
1977	Urban JPG. Fluid and Solute Transport in the Inter-Vertebral Disc [PhD thesis]. Imperial College London; June 1977.
2016	Frazer LL. Stresses Associated With Subchondral Bone Cysts: A Finite Element Analysis on an Extended Stifle Joint [Master's thesis]. Lawrence, KS: University of Kansas; 2016.
2019	Frazer LL. Subchondral Bone Cysts Filling the Void [PhD thesis]. Lawrence, KS: University of Kansas; 2019.
1985	Yoganandan N. Mechanical Factors and the Threshold of Trauma of the Intervertebral Joint: A Finite Element Analysis With Experimental Validation [PhD thesis]. Marquette University; December 1985.
1981	Tencer A. The Mechanical Properties of the Human Lumbar Spine [PhD thesis]. McGill University; April 1981.
1997	Duncan NA. The Mechanics of Curve Progression in Adolescent Idiopathic Scoliosis [PhD thesis]. McGill University; February 1997.
2004	Yao H. Physical Signals and Solute Transport in Cartilaginous Tissues [PhD thesis]. University of Miami; August 2004.
2016	Gao X. Modeling the Biomechanics and Mechanobiology of Intervertebral Discs [PhD thesis]. University of Miami; August 2016.
2016	Zhu Q. Numerical Modeling of Intervertebral Disc Degeneration and Repair [PhD thesis]. University of Miami; May 2016.
2017	Elmasry S. Developing Computational Models for the Biomechanical Assessment of Thoracolumbar Spine Surgeries [PhD thesis]. University of Miami; August 2017.
2005	Shin G. Viscoelastic Responses of the Lumbar Spine During Prolonged Stooping [PhD thesis]. North Carolina State University; 2005.
2013	Verbruggen SW. Mechanobiological Origins of Osteoporosis [PhD thesis]. National University of Ireland Galway; September 2013.
2021	Malakoutian M. Biomechanical Properties of Paraspinal Muscles and Their Influence on Spinal Loading: An Experimental and Computational Investigation [PhD thesis]. Vancouver, BC: University of British Columbia; May 2021.
1987	Schlaepfer JF. Development of a Technique to Estimate the in Vivo Spinal Load [PhD thesis]. Calgary, AB: University of Calgary; February 1987.
1988	Kim YE. An Analytical Investigation of Ligamentous Lumbar Spine Mechanics University of Iowa; May 1988.
2017	Maas S. Development of a Nonlinear Finite Element Code for Computational Biomechanics and Biophysics [PhD thesis]. University of Utah; May 2017.
2005	Tschirhart CE. Biomechanics and Prophylactic Treatment of Spinal Metastases: A Finite Element Based Study [Master's thesis]. University of Toronto; 2005.
2006	Panzer MB. Numerical Modelling of the Human Cervical Spine in Frontal Impact [Master's thesis]. University of Waterloo; 2006.
2007	Scannell JP. In Vitro and in Vivo Biomechanical Investigation of the Clinical Practice of Disc Prolapse Prevention and Rehabilitation [PhD thesis]. University of Waterloo; 2007.
2011	Howarth SJ. Mechanical Response of the Porcine Cervical Spine to Acute and Repetitive Anterior-Posterior Shear [PhD thesis]. University of Waterloo; 2011.
1985	Yang KH. An Experimental and Analytical Study of the Mechanism of Facet Load Transmission [PhD thesis]. Detroit, MI: Wayne State University; May 1985.
2005	Cao KD. Development of a 4-Vertebrae, Detailed Finite Element Model of Thoracolumbar Spine [PhD thesis]. Detroit, MI: Wayne State University; August 2005.
1996	Kim Y. A Finite-Element Study of Intervertebral Cages and Spinal Bone Remodeling [PhD thesis]. University of Wisconsin – Madison; 1996.
2021	Guang Y. Understanding a Role for Synovium in Intra-Articular Drug Clearance: A Computational and Experimental Approach [PhD thesis]. St. Louis, MO: Washington University in St. Louis; May 2021.
1989	Crisco JJ III. The Biomechanical Stability of the Human Lumbar Spine: Experimental and Theoretical Investigations [PhD thesis]. Yale University; May 1989.
1992	Oxland TR. Burst Fractures of the Human Thoracolumbar Spine: A Biomechanical Investigation [PhD thesis]. New Haven, CT: Yale University; May 1992.
2007	Reeves NP. Tuning-Out Instability: The Importance of Feedback Control in the Spine [PhD thesis]. Yale University; December 2007.