A methodology using a combined injury criteria index to study the performance of various driver restraint system configurations

Yang, Jikuang; Mellander, Hugo; Lövsund, Per; Håland, Yngve; Svanberg, Henrik

The objective of this study was to evaluate the performance of various configurations of a driver restraint system by using a combined injury criteria index and making the restraint system adaptive to different frontal crash coinditions, such as severity of the crash, belt use, sitting position, pre-impact braking and size of the driver.

For this purpose, a mathematical model of a driver restraint system was developed. The study was divided into three steps:

A FE-model of the driver airbag was developed by using MADYMO 3D program;
The model was validated by comparing the simulations to crash tests;
Effects of design changes in an adaptive restraint system on injury parameters were investigated in simulations of frontal car impacts.

It was found that the performance of the restraint system was most influenced by the size of the ventilation hole and the capacity of the gas generator. The best performance of an airbag for an unbelted 50th and 95th dummy can be achieved by choosing a relatively large vent hole diameter in combination with a high mass flow at impact speeds of 48 km/h or higher. For a 5th dummy, a lower level of gas generator was preferable at 25 km/h while a higher performance of the gas generator was desirable at 48 km/h. These effects interfered with the effects of other variables such as the seat belt system including a pretensioner, load limiter. A complete restraint system has to be tuned together to achieve the maximum safety performance. It is preferable, in terms of injury parameters, to absorb the kinetic energy of the belted dummy with the maximum allowable motion. This can be achieved with a lower force level in the load limiter.

Year

Entry

1974

Aldman B, Andersson Å, Saxmark O. Possible effects of airbag inflation on a standing child. In: 18th Annual Proceedings, Association for the Advancement of Automotive Medicine (AAAM). September 12-14, 1974; Toronto, ON.15-29.

1985

Skötte L-G, Mellander H, Biss DJ. The use of the DRACR airbag simulation model as a design tool. In: Proceedings of the 10th International Technical Conference on Experimental Safety Vehicles (ESV). July 1-4, 1985; Oxford, England.448-454. SAE 856064.

1994

Schulte U, Weyersberg A. Theoretical optimization study of an airbag system. In: Proceedings of the 14th International Technical Conference on the Enhanced Safety of Vehicles (ESV). May 23-26, 1994; Munich, Germany.671-675.

1985

Gustafsson H, Nygren A, Tingvall C. Rating system for serious consequences (RSC) due to traffic accidents: risk of death or permanent disability. In: Proceedings of the 10th International Technical Conference on Experimental Safety Vehicles (ESV). July 1-4, 1985; Oxford, England.556-560. SAE 856075.

1996

Yang J, Håland Y. Modeling of adaptive passenger airbag systems in car frontal crashes. In: Proceedings of the 15th International Technical Conference on the Enhanced Safety of Vehicles (ESV). May 13-16, 1996; Melbourne, Australia.486-501.