Theory of Elasticity

Year	Entry
1995	Benzley SE, Perry E, Merkley K, Clark B, Sjaardema G. A comparison of all-hexahedral and all-tetrahedral finite element meshes for elastic and elasto-plastic analysis. Proceedings of the 4th International Meshing Roundtable; October 16-17, 1995; Albuquerque, NM.
1982	Gibson LJ, Ashby MF. The mechanics of three-dimensional cellular materialsthe mechanics of three-dimensional cellular materials. Proc R Soc Lon Ser-A. July 8, 1982;382(1782):43-59.
2015	Park I-S, Yun K-W, Park K-J, Kim H-J. Study on the safety performance of the rear safety guard with air bag for truck. In: Proceedings of the 24th International Technical Conference on the Enhanced Safety of Vehicles (ESV). June 8-11, 2015; Gothenburg, Sweden.
1989	Lighthall JW, Melvin JW, Ueno K. Toward a biomechanical criterion for functional brain injury. In: Proceedings of the 12th International Technical Conference on Experimental Safety Vehicles (ESV). May 29–June 1, 1989; Göteborg, Sweden.627-633.
2003	Coats B, Margulies SS. Characterization of pediatric porcine skull properties during impact. In: Proceedings of the 2003 International IRCOBI Conference on the Biomechanics of Impact. September 25, 2003; Lisbon, Portugal.
2010	Motherway JA, Verschueren P, Van der Perre G, Vander Sloten J, Gilchrist MD. The mechanical properties cranial bone. In: Proceedings of the 2010 International IRCOBI Conference on the Biomechanics of Impact. September 15-17, 2010; Hannover, Germany.131-134.
2010	Motherway JA, Gilchrist MD. The impact response of cranial bone. In: Proceedings of the 6th Ohio State University Injury Biomechanics Symposium. May 16-18, 2010; Columbus, OH.
1994	Zeng Y, Cowin SC, Weinbaum S. A fiber matrix model for fluid flow and streaming potentials in the canaliculi of an osteon. Ann Biomed Eng. May–June 1994;22(3):280-292.
2001	van der Meulen MCH, Jepsen KJ, Mikić B. Understanding bone strength: size isn’t everything. Bone. July 2001;29(1):101-104.
2008	Nazarian A, von Stechow D, Zurakowski D, Müller R, Snyder BD. Bone volume fraction explains the variation in strength and stiffness of cancellous bone affected by metastatic cancer and osteoporosis. Calcif Tiss Int. December 2008;83(6):368-379.
2011	Johnston JD, Kontulainen SA, Masri BA, Wilson DR. Predicting subchondral bone stiffness using a depth-specific CT topographic mapping technique in normal and osteoarthritic proximal tibiae. Clin Biomech (Bristol, Avon). December 2011;26(10):1012-1018.
1991	Naganarayana BP, Prathap G. Field-consistency analysis of 27-noded hexahedral elements for constrained media elasticity. Finite Elem Anal Des. 1991;9(2):149-168.
1992	Cifuentes AO, Kalbag A. A performance study of tetrahedral and hexahedral elements in 3-D finite element structural analysis. Finite Elem Anal Des. 1992;12(3-4):313-318.
1972	Hayes WC, Keer LM, Herrmann G, Mockros LF. A mathematical analysis for indentation tests of articular cartilage. J Biomech. September 1972;5(5):541-551.
1989	Petrov N, Pollack S, Blagoeva R. A discrete model for streaming potentials in a single osteon. J Biomech. 1989;22(6-7):517-521.
1990	Choi K, Kuhn JL, Ciarelli MJ, Goldstein SA. The elastic moduli of human subchondral, trabecular, and cortical bone tissue and the size-dependency of cortical bone modulus. J Biomech. 1990;23(11):1103-1113.
1991	Lotz JC, Gerhart TN, Hayes WC. Mechanical properties of metaphyseal bone in the proximal femur. J Biomech. 1991;24(5):317-329.
2009	Motherway JA, Verschueren P, Van der Perre G, Vander Sloten J, Gilchrist MD. The mechanical properties of cranial bone: the effect of loading rate and cranial sampling position. J Biomech. September 18, 2009;42(13):2129-2135.
2011	Vanderoost J, Jaecques SVN, Perre GVd, Boonen S, D'hooge J, Lauriks W, Lenthe GHv. Fast and accurate specimen-specific simulation of trabecular bone elastic modulus using novel beam–shell finite element models. J Biomech. May 17, 2011;44(8):1566-1572.
1987	Ueno K, Liu YK. A three-dimenstional nonlinear finite element model of lumbar intervertebral joint in torsion. J Biomech Eng. August 1987;109(3):200-209.
1982	Horgan CO. Saint-Venant end effects in composites. J Compos Mater. 1982;16(5):411-422.
1979	Starkebaum W, Pollack SR, Korostoff E. Midroelectrode studies of stress-generated potentials in four-point bending of bone. J Mater Res. September 1979;13(5):729-751.
2011	Smuts AN, Blaine DC, Scheffer C, Weich H, Doubell AF, Dellimore KH. Application of finite element analysis to the design of tissue leaflets for a percutaneous aortic valve. J Mech Behav Biomed Mater. January 2011;4(1):85-98.
2014	Achrai B, Bar-On B, Wagner D. Bending mechanics of the red-eared slider turtle carapace. J Mech Behav Biomed Mater. February 2014;30:223-233.
1981	Lee RC, Frank EH, Grodzinsky AJ, Roylance DK. Oscillatory compressional behavior of articular cartilage and its associated electromechanical properties. J Biomech Eng. November 1981;103(2):280-292.
2006	Coats B, Margulies SS. Material properties of human infant skull and suture at high rates. J Neurotrauma. August 2006;23(8):1222-1232.
1989	Kuhn JL, Goldstein SA, Choi K, London M, Feldkamp LA, Matthews LS. Comparison of the trabecular and cortical tissue moduli from human iliac crests. J Orthop Res. November 1989;7(6):876-884.
2019	Tertuliano OA. Small-Scale Deformation and Fracture of Hard Biomaterials [PhD thesis]. Pasadena, CA: California Institute of Technology; 2019.
1981	Gibson LJ. The Elastic and Plastic Behaviour of Cellular Materials [PhD thesis]. Cambridge, UK: University of Cambridge; August 1981.
2012	Strange DGT. Mechanics of Biomimetic Materials for Tissue Engineering of the Intervertebral Disc [PhD thesis]. Cambridge, UK: University of Cambridge; December 2012.
1993	Setton LA. Effects of Intrinsic Viscoelasticity and Ion-Induced Swelling on the Mechanical Behavior of Articular Cartilage: Theory and Experiments [PhD thesis]. Columbia University; 1993.
2008	Nazarian A. Relative Interaction of Material and Structure in Normal and Pathologic Bone [PhD thesis]. Swiss Federal Institute of Technology Zürich; 2008.
2009	Moesen M. Modeling of the Geometry and Mechanical Behavior of Bone Scaffolds [PhD thesis]. Leuven, Belgium: Katholieke Universiteit Leuven; June 2009.
2021	Jacobson N. Design and Validation of a Non-Invasive Intra-Abdominal Pressure Measurement Device [PhD thesis]. McGill University; August 2021.
2013	Vijayakumar V. Quantifying the Regional Variations in the Mechanical Properties of Cancellous Bone of the Tibia Using Indentation Testing and CT Imaging [Master's thesis]. Hamilton, ON: McMaster University; September 2013.
1987	Sachs JR. A Mathematical Model of an Electromechanically Coupled Poroelastic Medium [PhD thesis]. Cambridge, MA: Massachusetts Institute of Technology; June 1987.
1988	Lotz JC. Hip Fracture Risk Predictions by X-Ray Computed Tomography [PhD thesis]. Cambridge, MA: Massachusetts Institute of Technology; August 1988.
1991	Guillot M. Process Modelling for Intelligent Machining Control [PhD thesis]. Cambridge, MA: Massachusetts Institute of Technology; April 1991.
1999	Kesler OE. Residual Stresses and Properties of Layered and Graded Coatings Cambridge, MA: Massachusetts Institute of Technology; September 1999.
2002	Samosky JT. Spatially-Localized Correlation of MRI and Mechanical Stiffness to Assess Cartilage Integrity in the Human Tibial Plateau [PhD thesis]. Cambridge, MA: Massachusetts Institute of Technology; June 2002.
2001	Ewers BJ III. Correlations of Stress and Strain With Alterations in Cartilage and Underlying Subchondral Bone Following an Impact in an in Vivo Animal and an in Vitro Explant Model [PhD thesis]. University of Michigan; 2001.
1987	Santare MH. Failure Mechanisms At the Bone-Prosthesis Interface [PhD thesis]. Evanston, IL: Northwestern University; June 1987.
2000	Whiteside R. Press-Fit Strength of Osteochondral Mosaicplasty: An in Vitro Study [Master's thesis]. Queen's University; October 2000.
2009	Janssen DW. Macro- and Micromechanics of Cemented Total Hip Arthroplasty [PhD thesis]. Radboud University; 2009.
1986	Fyhrie DP. Stress Analysis and Design of Proximal Femoral Prostheses [PhD thesis]. Stanford University; January 1986.
1994	Giori NJ. Mechanical Influences on the Differentiation and Modulation of Skeletal and Connective Tissues [PhD thesis]. Stanford University; July 1994.
2000	Sarin VK. Mechanobiology of Sesamoid Formation, Development, and Ossification [PhD thesis]. Stanford University; May 2000.
2003	Lennon AB. A Stochastic Model of Damage Accumulation in Acrylic Bone Cement: Application to Failure Modelling of Cemented Hip Replacement [PhD thesis]. Trinity College Dublin; 2003.
2002	Bellezza AJ. Biomechanical Properties of the Normal and Early Glaucomatous Optic Nerve Head: An Experimental and Computational Study Using the Monkey Model [PhD thesis]. Tulane University; 2002.
1996	Raboud DW. Large Deformation Analysis of Flexible Rods [PhD thesis]. Edmonton, AB: University of Alberta; F 1996.
2010	Johnston JD. Development of a Non-Invasive Imaging Technique for Characterizing Subchondral Bone Density and Stiffness [PhD thesis]. Vancouver, BC: University of British Columbia; December 2010.
1992	Van der Voet AF. Finite Element Modelling of Load Transfer Through Articular Cartilage [PhD thesis]. Calgary, AB: University of Calgary; August 1992.
2003	Han S-K. Articular Cartilage Modeling in the 3-D Patellofemoral Joint Contact [Master's thesis]. Calgary, AB: University of Calgary; June 2003.
1981	Schajer GS. Analysis of Roller-Induced Residual Stresses in Circular Discs and Their Effect on Disc Vibration [PhD thesis]. Berkeley, CA: Berkeley, University of California; 1981.
1987	Pang S-S. Investigations of Pneumatic Percussive Processes Involving Rocks [PhD thesis]. Berkeley, CA: Berkeley, University of California; 1987.
1982	Singh SP. Material Nonlinear Analysis of 3-D and Axisymmetric Structures (under Arbitrary Loads) Using Hybrid Stress Finite Elements [PhD thesis]. University of Illinois at Chicago Circle; 1982.
1996	El Ouafi A. Modélisation des erreurs dans les machines-outils pour une compensation active [PhD thesis]. Université Laval; July 1996.
2000	Guilbault R. Développement d'un modèle tridimensionnel d'engrenages cylindriques hélicoïdaux: Calcul des distributions linéiques de charge et contraintes au pied des dents [PhD thesis]. Université Laval; May 2000.
2008	Garland PP. A Theoretical, Computational and Experimental Study of Oblique Elastic Impact of Bodies With Circular Contact Zones [PhD thesis]. University of New Brunswick; March 2008.
1988	Galbraith JA. The Effects of Mechanical Loading on the Electrophysiology of the Squid Giant Axon [PhD thesis]. Philadelphia, PA: University of Pennsylvania; 1988.
2007	Coats B. Mechanics of Head Impact in Infants [PhD thesis]. Philadelphia, PA: University of Pennsylvania; 2007.
2009	Kim K. MEMS-Based Mechanical Characterization of Micrometer-Sized Biomaterials [PhD thesis]. University of Toronto; 2009.
1972	Neale KW. Finite Deformations and Instabilities of Elastic-Plastic Solids Under Repeated Loading [PhD thesis]. University of Waterloo; March 1972.
2006	Spinello D. Instabilities in Multiphysics Problems: Micro- and Nano-Electromechanical Systems, and Heat-Conducting Thermoelastoviscoplastic Solids [PhD thesis]. Virginia Polytechnic Institute and State University; August 28, 2006.
2010	Mohammadi M. Analysis of the Elastic Field in Functionally Graded Materials [PhD thesis]. University of Western Ontario; 2010.
2001	Lee T. Viscoelastic Properties of Biological and High-Damping Composite Materials [PhD thesis]. University of Wisconsin – Madison; 2001.
2016	Alshaya AA. Experimental, Analytical and Numerical Analyses of Orthotropic Materials and Biomechanics Application [PhD thesis]. University of Wisconsin – Madison; 2016.
2001	Brown CU. Time-Dependent Circumferential Deformation of Cortical Bone Subjected to Internal Radial Loading [PhD thesis]. West Virginia University; 2001.
2002	Shultz TR. The Effects of Cortical Bone Viscoelasticity on the Fixation/stability of Cemented and Cementless Femoral Implants: A Finite Element Analysis [Master's thesis]. West Virginia University; 2002.