wbldb
home
|
authors
|
theses
Behrens, J. C.;
Walker, P. S.
; Shoji, H.
Variations in strength and structure of cancellous bone at the knee
J Biomech
. 1974;7(3):201-207
Links
DOI:
10.1016/0021-9290(74)90010-4
PubMed:
4844327
WoS:
A1974T641400002
Cited Works (10)
Year
Entry
1966
Weaver JK, Chalmers J. Cancellous bone: its strength and changes with aging and an evaluation of some methods for measuring its mineral content, I: age changes in cancellous bone.
J Bone Joint Surg
. March 1966;48A(2):289-298.
1972
Walker PS, Hajek JV. The load-bearing area in the knee joint.
J Biomech
. November 1972;5(6):581-589.
1917
Koch JC. The laws of bone architecture.
Am J Anat
. March 1917;21(2):177-298.
1966
Chalmers J, Weaver JK. Cancellous bone: its strength and changes with aging and an evaluation of some methods for measuring its mineral content, II: an evaluation of some methods for measuring osteoporosis.
J Bone Joint Surg
. March 1966;48A(2):299-308.
1972
Rybicki EF, Simonen FA, Weis EB Jr. On the mathematical analysis of stress in the human femur.
J Biomech
. March 1972;5(2):203-215.
1972
Chamay A, Tschantz P. Mechanical influences in bone remodeling: experimental research on Wolff's law.
J Biomech
. March 1972;5(2):173-180.
1972
Burstein AH, Currey JD, Frankel VH, Reilly DT. The ultimate properties of bone tissue: the effects of yielding.
J Biomech
. January 1972;5(1):35-44.
1970
Galante J, Rostoker W, Ray RD. Physical properties of trabecular bone.
Calcif Tiss Res
. 1970;5(1):236-246.
1892
Wolff J. Das Gesetz der Transformation der Knochen. Berlin: Hirschwald; 1892.
1970
Morrison JB. The mechanics of the knee joint in relation to normal walking.
J Biomech
. January 1970;3(1):51-61.
Cited By (60)
Year
Entry
2004
Haug E, Choi H-Y, Robin S, Beaugonin M. Human models for crash and impact simulation. In: Ayache N, ed.
Computational Models for the Human Body
. Amsterdam, The Netherlands: Elsevier B.V; 2004:231-452. Ciarlet PG, ed.
Handbook of Numerical Analysis
; vol 12.
1994
Linde F. Elastic and viscoelastic properties of trabecular bone by a compression testing approach.
Dan Med Bull
. April 1994;41(2):119-138.
1998
Martin RB, Burr DB, Sharkey NA.
Skeletal Tissue Mechanics
. New York, NY: Springer-Verlag; 1998.
2000
Takahashi Y, Kikuchi Y, Konosu A, Ishikawa H. Development and validation of the finite element model for the human lower limb of pedestrians.
Stapp Car Crash J
. 2000;44:335-355. SAE 2000-01-SC22.
1980
Brown TD, Ferguson AB Jr. Mechanical property distributions in the cancellous bone of the human proximal femur.
Acta Orthop Scand
. 1980;51(1):429-437.
1978
Halawa M, Lee AJC, Ling RSM, Vangala SS. The shear strength of trabecular bone from the femur, and some factors affecting the shear strength of the cement-bone interface.
Arch Orthop Trauma Surg
. March 1978;92(1):19-30.
1980
Rohlmann A, Zilch H, Bergmann G, Kölbel R. Material properties of femoral cancellous bone in axial loading, I: time independent properties.
Arch Orthop Trauma Surg
. September 1980;97(2):95-102.
2019
Wood Z, Lynn L, Nguyen JT, Black MA, Patel M, Barak MM. Are we crying wolff? 3D printed replicas of trabecular bone structure demonstrate higher stiffness and strength during off-axis loading.
Bone
. October 2019;127:635-645.
1975
Runkle JC, Pugh J. The micro-mechanics of cancellous bone, II: determination of the elastic modulus of individual trabeculae by a buckling analysis.
Bull Hosp Joint Dis
. April 1975;36(1):2-10.
1993
Flynn MJ, Cody DD. The assessment of vertebral bone macroarchitecture with x-ray computed tomography.
Calcif Tiss Int
. February 1993;53(suppl 1):S170-S175.
1984
Hvid I, Jensen J. Cancellous bone strength at the proximal human tibia.
Eng Med
. January 1984;13(1):21-25.
1985
Hvid I, Jensen NC, Bünger C, Sølund K, Djurhuus JC. Bone mineral assay: its relation to the mechanical strength of cancellous bone.
Eng Med
. 1985;14(2):79-83.
1985
Linde F, Hvid I, Jensen NC. Material properties of cancellous bone in repetitive axial loading.
Eng Med
. October 1985;14(4):173-177.
2012
Skedros JG, Knight AN, Farnsworth RW, Bloebaum RD. Do regional modifications in tissue mineral content and microscopic mineralization heterogeneity adapt trabecular bone tracts for habitual bending? analysis in the context of trabecular architecture of deer calcanei.
J Anat
. March 2012;220(3):242-255.
1977
Ducheyne P, Heymans L, Martens M, Aernoudt E, Meester Pd, Mulier JC. The mechanical behaviour of intracondylar cancellous bone of the femur at different loading rates.
J Biomech
. 1977;10(11-12):747-762.
1978
Hayes WC, Swenson LW Jr, Schurman DJ. Axisymmetric finite element analysis of the lateral tibial plateau.
J Biomech
. 1978;11(1-2):21-33.
1979
Kenner GH, Taylor LC, Park JB. Compressive strength of canine femur.
J Biomech
. January 1, 1979;12(7):519-526.
1983
Goldstein SA, Wilson DL, Sonstegard DA, Matthews LS. The mechanical properties of human tibial trabecular bone as a function of metaphyseal location.
J Biomech
. 1983;16(12):965-969.
1983
Martens M, Van Audekercke R, Delport P, De Meester P, Mulier JC. The mechanical characteristics of cancellous bone at the upper femoral region.
J Biomech
. 1983;16(12):971-983.
1985
Gibson LJ. The mechanical behaviour of cancellous bone.
J Biomech
. 1985;18(5):317-328.
1987
Bentzen SM, Hvid I, Jorgensen J. Mechanical strength of tibial trabecular bone evaluated by X-ray computed tomography.
J Biomech
. 1987;20(8):743-752.
1987
Goldstein SA. The mechanical properties of trabecular bone: dependence on anatomic location and function.
J Biomech
. 1987;20(11-12):1055-1061.
1988
Rice JC, Cowin SC, Bowman JA. On the dependence of the elasticity and strength of cancellous bone on apparent density.
J Biomech
. 1988;21(2):155-168.
1989
Kuhn JL, Goldstein SA, Ciarelli MJ, Matthews LS. The limitations of canine trabecular bone as a model for human: a biomechanical study.
J Biomech
. 1989;22(2):95-107.
1989
Linde F, Hvid I. The effect of constraint on the mechanical behaviour of trabecular bone specimens.
J Biomech
. 1989;22(5):485-490.
1989
Odgaard A, Hvid I, Linde F. Compressive axial strain distributions in cancellous bone specimens.
J Biomech
. 1989;22(8-9):829-835.
1989
Ashman RB, Rho JY, Turner CH. Anatomical variation of orthotropic elastic moduli of the proximal human tibia.
J Biomech
. 1989;22(8-9):895-900.
1990
Sharp DJ, Tanner KE, Bonfield W. Measurement of the density of trabecular bone.
J Biomech
. 1990;23(8):853-857.
1991
Linde F, Nørgaard P, Hvid I, Odgaard A, Søballe K. Mechanical properties of trabecular bone: dependency on strain rate.
J Biomech
. 1991;24(9):803-809.
1998
Hurwitz DE, Sumner DR, Andriacchi TP, Sugar DA. Dynamic knee loads during gait predict proximal tibial bone distribution.
J Biomech
. May 1998;31(5):423-430.
2005
Gibson LJ. Biomechanics of cellular solids.
J Biomech
. 2005;38(3):377-399.
2023
Albert DL, Katzenberger MJ, Hunter RL, Agnew AM, Kemper AR. Effects of loading rate, age, and morphology on the material properties of human rib trabecular bone.
J Biomech
. July 2023;156:111670.
1982
Williams JL, Lewis JL. Properties and an anisotropic model of cancellous bone from the proximal tibial epiphysis.
J Biomech Eng
. February 1982;104(1):50-56.
1986
Little RB, Wevers HW, Siu D, Cooke TDV. A three-dimensional finite element analysis of the upper tibia.
J Biomech Eng
. May 1986;108(2):111-119.
1976
Hayes WC, Carter DR. Postyield behavior of subchondral trabecular bone.
J Biomed Mater Res
. July 1976;10(4):537-544.
2000
Nafei A, Danielsen CC, Linde F, Hvid I. Properties of growing trabecular ovine bone, I: mechanical and physical properties.
J Bone Joint Surg
. August 2000;82B(6):910-920.
2000
Nafei A, Kabel J, Odgaard A, Linde F, Hvid I. Properties of growing trabecular ovine bone, II: architectural and mechanical properties.
J Bone Joint Surg
. August 2000;82B(6):921-927.
1985
Hvid I, Hansen SL. Trabecular bone strength patterns at the proximal tibial epiphysis.
J Orthop Res
. 1985;3(4):464-472.
1991
Ciarelli MJ, Goldstein SA, Kuhn JL, Cody DD, Brown MB. Evaluation of orthogonal mechanical properties and density of human trabecular bone from the major metaphyseal regions with materials testing and computed tomography.
J Orthop Res
. May 1991;9(5):674-682.
2003
Patel V, Issever AS, Burghardt A, Laib A, Ries M, Majumdar S. MicroCT evaluation of normal and osteoarthritic bone structure in human knee specimens.
J Orthop Res
. 2003;21(1):6-13.
2016
Vijayakumar V, Quenneville CE. Quantifying the regional variations in the mechanical properties of cancellous bone of the tibia using indentation testing and quantitative computed tomographic imaging.
Proc Inst Mech Eng Part H-J Eng Med
. June 2016;230(6):588-593.
2001
Grant JP, Oxland TR, Dvorak MF. Mapping the structural properties of the lumbosacral vertebral endplates.
Spine
. April 15, 2001;26(8):889-896.
1993
Gabriel SM.
Structural Design and Analysis Considerations for Posterior Cruciate Ligament Sparing Tibial Components for Total Knee Arthroplasty
[PhD thesis]. Ithaca, NY: Cornell University; August 1993.
2003
Rawlinson JJ.
Specimen-Specific, Parametric Analyses of Stem Augmentation in Constrained Condylar Tibial Components
[PhD thesis]. Ithaca, NY: Cornell University; January 2003.
1994
Zysset P.
A Constitutive Law for Trabecular Bone
[PhD thesis]. Lausanne, Switzerland: École Polytechnique Fédérale de Lausanne; 1994.
2013
Vijayakumar V.
Quantifying the Regional Variations in the Mechanical Properties of Cancellous Bone of the Tibia Using Indentation Testing and CT Imaging
[Master's thesis]. Hamilton, ON: McMaster University; September 2013.
1986
Cheal EJ.
Trabecular Bone Remodeling Around Implants
[PhD thesis]. Cambridge, MA: Massachusetts Institute of Technology; June 1986.
2010
Johnson TPM.
On the Rate-Dependent Constitutive Response of Cortical and Trabecular Bone
[PhD thesis]. Cambridge, MA: Massachusetts Institute of Technology; September 2010.
2009
Baumer TG.
Material Property Documentation and Fracture Analyses of the Developing Skull
[Master's thesis]. East Lansing, MI: Michigan State University; 2009.
2022
Khakpour S.
Multi-Component Finite Element Analysis of Low- Energy Acetabular Fracture: Computational Study of Pelvic Girdle Fracture Mechanism
[PhD thesis]. University of Oulu; 2022.
1991
Ploeg H-L.
An Evaluation of a Joint Replacement for the Great Toe: A Three-Dimensional Finite Element Study
[Master's thesis]. Queen's University; September 1991.
2000
Whiteside R.
Press-Fit Strength of Osteochondral Mosaicplasty: An in Vitro Study
[Master's thesis]. Queen's University; October 2000.
2024
Cameron E.
Knee Joint Loading and Fracture Risk Analyses of Patients With Benign Bone Tumours: A Finite Element Analysis
[Master's thesis]. Queen's University; August 15, 2024.
2006
Whitty M.
Development of a Physiological Three Dimensional Finite Element Model of a Human Tibia
[Master's thesis]. Kingston, ON: Royal Military College of Canada; May 2006.
2009
Mahboob Z.
A Validated Finite Element Study of Stress Shielding in a Novel Hybrid Knee Implant
[Master's thesis]. Ryerson University; 2009.
1987
Turner CH.
On the Relationship Between the Elastic Properties of Cancellous Bone and Its Structure
[PhD thesis]. New Orleans, LA: Tulane University; 1987.
2002
Wohl GR.
Bone Mechanics in Transplanted Osteochondral Grafts
[PhD thesis]. Calgary, AB: University of Calgary; September 2002.
2002
Morgan EF-i.
The Dependence on Anatomic Site of Trabecular Bone Structure-Function Relationships
[PhD thesis]. Berkeley, CA: Berkeley, University of California; 2002.
1991
Hollister SJ.
Homogenization Analysis of Trabecular Bone and Prediction Ofbone Ingrowth Using Topology Optimization
[PhD thesis]. University of Michigan; 1991.
2018
Fang Y.
Investigation of Bone Loading in FES-Assisted Rowing and Its Effect on Preventing Bone Loss in People With Spinal Cord Injury
[PhD thesis]. Worcester, MA: Worcester Polytechnic Institute; August 2018.