Nonlinear finite element model predicts vertebral bone strength and fracture site

wbldb

Imai, Kazuhiro¹; Ohnishi, Isao¹; Bessho, Masahiko¹; Nakamura, Kozo¹

Nonlinear finite element model predicts vertebral bone strength and fracture site

Spine. July 15, 2006;31(16):1789-1794

©2006 Lippincott Williams & Wilkins, Inc.

Affiliations

¹Department of Orthopaedic Surgery, University of Tokyo, Tokyo, Japan
Abstract and keywords

Study Design: A study on computed tomography (CT)-based finite element (FE) method that predicts vertebral strength and fracture site using human cadaveric specimens.

Objective: To evaluate the accuracy of the nonlinear FE method by comparing the predicted data with those of mechanical testing.

Summary of Background Data: FE methods may predict vertebral strength and fracture site but the prediction has been difficult because of a complex geometry, elastoplasticity, and thin cortical shell of the vertebra.

Methods: FE models of the 12 thoracolumbar vertebral specimens were constructed. Nonlinear FE analyses were performed, and the yield load, the fracture load, the sites where elements failed, and the distribution of minimum principal strain were evaluated. A quasi-static uniaxial compression test for the same specimens was conducted to verify these analyses.

Results: The yield loads, fracture loads, minimum principal strains, and fracture sites of the FE prediction significantly correlated with those measured.

Conclusions: Nonlinear FE model predicted vertebral strength and fracture site accurately.

Keywords: vertebral fracture; osteoporosis; fracture strength prediction; nonlinear finite element analysis; fracture site
Links

DOI: 10.1097/01.brs.0000225993.57349.df

PubMed: 16845352

WoS: 000239197200006
History

Received: 2005-05-13

Revised: 2005-08-2005

Accepted: 2005-09-28

Cited Works (30)

Year	Entry
1998	Silva MJ, Keaveny TM, Hayes WC. Computed tomography-based finite element analysis predicts failure loads and fracture patterns for vertebral sections. J Orthop Res. May 1998;16(3):300-308.
1994	Silva MJ, Wang C, Keaveny TM, Hayes WC. Direct and computed tomography thickness measurements of the human, lumbar vertebral shell and endplate. Bone. July 8, 1994;15(4):409-414.
2001	Keyak JH. Improved prediction of proximal femoral fracture load using nonlinear finite element models. Med Eng Phys. April 2001;23(3):165-173.
1998	Hou FJ, Lang SM, Hoshaw SJ, Reimann DA, Fyhrie DP. Human vertebral body apparent and hard tissue stiffness. J Biomech. November 1998;31(11):1009-1015.
1998	Keyak JH, Rossi SA, Jones KA, Skinner HB. Prediction of femoral fracture load using automated finite element modeling. J Biomech. February 1998;31(2):125-133.
2003	Liebschner MAK, Kopperdahl DL, Rosenberg WS, Keaveny TM. Finite element modeling of the human thoracolumbar spine. Spine. March 15, 2003;28(6):559-565.
1998	Kopperdahl DL, Keaveny TM. Yield strain behavior of trabecular bone. J Biomech. July 1998;31(7):601-608.
1991	Faulkner KG, Cann CE, Hasegawa BH. Effect of bone distribution on vertebral strength: assessment with patient-specific nonlinear finite element analysis. Radiology. June 1991;179(3):669-674.
1994	Myers BS, Arbogast KB, Lobaugh B, Harper KD, Richardson WJ, Drezner MK. Improved assessment of lumbar vertebral body strength using supine lateral dual‐energy X‐ray absorptiometry. J Bone Miner Res. May 1994;9(5):687-693.
1989	Mosekilde L, Bentzen SM, Ørtoft G, Jørgensen J. The predictive value of quantitative computed tomography for vertebral body compressive strength and ash density. Bone. 1989;10(6):465-470.
1976	Carter DR, Hayes WC. Bone compressive strength: the influence of density and strain rate. Science. September 10, 1976;194(4270):1174-1176.
1977	Carter DR, Hayes WC. The compressive behavior of bone as a two-phase porous structure. J Bone Joint Surg. 1977;59A(7):954-962.
1994	Keller TS. Predicting the compressive mechanical behavior of bone. J Biomech. September 1994;27(9):1159-1168.
1994	Keaveny TM, Wachtel EF, Ford CM, Hayes WC. Differences between the tensile and compressive strengths of bovine tibial trabecular bone depend on modulus. J Biomech. 1994;27(9):1137-1146.
1985	McBroom RJ, Hayes WC, Edwards WT, Goldberg RP, White AA III. Prediction of vertebral body compressive fracture using quantitative computed tomography. J Bone Joint Surg. 1985;67A(8):1206-1214.
1990	Choi K, Kuhn JL, Ciarelli MJ, Goldstein SA. The elastic moduli of human subchondral, trabecular, and cortical bone tissue and the size-dependency of cortical bone modulus. J Biomech. 1990;23(11):1103-1113.
1990	Katsamanis F, Raftopoulos DD. Determination of mechanical properties of human femoral cortical bone by the Hopkinson bar stress technique. J Biomech. 1990;23(11):1173-1184.
1991	Lotz JC, Cheal EJ, Hayes WC. Fracture prediction for the proximal femur using finite element models, I: linear analysis. J Biomech Eng. 1991;113(4):353-360.
1999	Prevrhal S, Engelke K, Kalender WA. Accuracy limits for the determination of cortical width and density: the influence of object size and CT imaging parameters. Phys Med Biol. March 1999;44(3):751-764.
1997	Cheng XG, Nicholson PHF, Boonen S, Lowet G, Brys P, Aerssens J, van der Perre G, Dequeker J. Prediction of vertebral strength in vitro by spinal bone densitometry and calcaneal ultrasound. J Bone Miner Res. October 1997;12(10):1721-1728.
1998	Ladd AJC, Kinney JH, Haupt DL, Goldstein SA. Finite‐element modeling of trabecular bone: comparison with mechanical testing and determination of tissue modulus. J Orthop Res. September 1998;16(5):622-628.
1993	Mosekilde L. Vertebral structure and strength in vivo and in vitro. Calcif Tiss Int. February 1993;53(suppl 1):S121-S126.
1990	Jensen KS, Mosekilde L, Mosekilde L. A model of vertebral trabecular bone architecture and its mechanical properties. Bone. 1990;11(6):417-423.
2003	Crawford RP, Cann CE, Keaveny TM. Finite element models predict in vitro vertebral body compressive strength better than quantitative computed tomography. Bone. 2003;33(4):744-750.
1991	Lotz JC, Cheal EJ, Hayes WC. Fracture prediction for the proximal femur using finite element models, II: nonlinear analysis. J Biomech Eng. 1991;113(4):361-364.
1989	Brinckmann P, Biggemann M, Hilweg D. Prediction of the compressive strength of human lumbar vertebrae. Clin Biomech (Bristol, Avon). 1989;4(suppl 2):S1-S27.
1999	Cody DD, Gross GJ, Hou FJ, Spencer HJ, Goldstein SA, Fyhrie DP. Femoral strength is better predicted by finite element models than QCT and DXA. J Biomech. October 1999;32(10):1013-1020.
2001	Morgan EF, Keaveny TM. Dependence of yield strain of human trabecular bone on anatomic site. J Biomech. 2001;34(5):569-577.
1997	Rho J-Y, Tsui TY, Pharr GM. Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation. Biomaterials. 1997;18(20):1325-1330.
1991	Vesterby A, Mosekilde L, Gundersen HJG, Melsen F, Mosekilde L, Holme K, Sørensen S. Biologically meaningful determinants of the in vitro strength of lumbar vertebrae. Bone. 1991;12(3):219-224.

Cited By (31)

Year	Entry
2013	Gustafson HM, Cripton PA. Use of digital image correlation for validation of surface strain in specimen-specific vertebral finite element models. In: Proceedings of the 9th Ohio State University Injury Biomechanics Symposium. May 19-21, 2013; Columbus, OH.
2017	Smolen C, Quenneville CE. A finite element model of the foot/ankle to evaluate injury risk in various postures. Ann Biomed Eng. August 2017;45(8):1993-2008.
2010	Keaveny TM. Biomechanical computed tomography: noninvasive bone strength analysis using clinical computed tomography scans. Annals NY Acad Sci. 2010;1192(1):57-65.
2020	Suzuki T, Matsuura Y, Yamazaki T, Akasaka T, Ozone E, Matsuyama Y, Mukai M, Ohara T, Wakita H, Taniguchi S, Ohtori S. Biomechanics of callus in the bone healing process, determined by specimen-specific finite element analysis. Bone. March 2020;132:115212.
2023	Song F, Wei Y, Feng W, Fu R, Li Z, Gao X, Cheng X, Yang H. Biomechanical CT-computed bone strength predicts the risk of subsequent vertebral fracture. Bone. January 2023;166:116601.
2023	Gao X, Din RU, Cheng X, Yang H. Biomechanical MRI detects reduced bone strength in subjects with vertebral fractures. Bone. August 2023;173:116810.
2013	Zysset PK, Dall'Ara E, Varga P, Pahr DH. Finite element analysis for prediction of bone strength. BoneKEy Rep. August 2013;2:386.
2008	Chevalier Y, Charlebois M, Pahr D, Varga P, Heini P, Schneider E, Zysset P. A patient-specific finite element methodology to predict damage accumulation in vertebral bodies under axial compression, sagittal flexion and combined loads. Comput Methods Biomech Biomed Eng. October 2008;11(5):477-487.
2009	Pahr DH, Zysset PK. From high-resolution CT data to finite element models: development of an integrated modular framework. Comput Methods Biomech Biomed Eng. 2009;12(1):45-57.
2009	Pahr DH, Zysset PK. A comparison of enhanced continuum FE with micro FE models of human vertebral bodies. J Biomech. March 11, 2009;42(4):455-462.
2016	Jackman TM, DelMonaco AM, Morgan EF. Accuracy of finite element analyses of CT scans in predictions of vertebral failure patterns under axial compression and anterior flexion. J Biomech. January 25, 2016;49(2):267-275.
2009	Chevalier Y, Pahr D, Zysset PK. The role of cortical shell and trabecular fabric in finite element analysis of the human vertebral body. J Biomech Eng. November 2009;131(11):111003.
2018	Hussein AI, Louzeiro DT, Unnikrishnan GU, Morgan EF. Differences in trabecular microarchitecture and simplified boundary conditions limit the accuracy of quantitative computed tomography-based finite element models of vertebral failure. J Biomech Eng. February 2018;140(2):021004.
2008	Keaveny TM, Bouxsein ML. Theoretical implications of the biomechanical fracture threshold. J Bone Miner Res. October 2008;23(10):1541-1547.
2008	Keaveny TM, Hoffmann PF, Singh M, Palermo L, Bilezikian JP, Greenspan SL, Black DM. Femoral bone strength and its relation to cortical and trabecular changes after treatment with PTH, alendronate, and their combination as assessed by finite element analysis of quantitative CT scans. J Bone Miner Res. December 2008;23(12):1974-1982.
2009	Orwoll ES, Marshall LM, Nielson CM, Cummings SR, Lapidus J, Cauley JA, Ensrud K, Lane N, Hoffmann PR, Kopperdahl DL, Keaveny TM; Osteoporotic Fractures in Men (MrOS) Study Group. Finite element analysis of the proximal femur and hip fracture risk in older men. J Bone Miner Res. March 2009;24(3):475-483.
2015	Zysset P, Qin L, Lang T, Khosla S, Leslie WD, Shepherd JA, Schousboe JT, Engelke K. Clinical use of quantitative computed tomography–based finite element analysis of the hip and spine in the management of osteoporosis in adults: the 2015 ISCD official positions—part II. J Clin Densitom. July–September 2015;18(3):359-392.
2012	Dall’Ara E, Pahr D, Varga P, Kainberger F, Zysset P. QCT-based finite element models predict human vertebral strength in vitro significantly better than simulated DEXA. Osteoporos Int. February 2012;23(2):563-572.
2014	Burkhart TA, Quenneville CE, Dunning CE, Andrews DM. Development and validation of a distal radius finite element model to simulate impact loading indicative of a forward fall. Proc Inst Mech Eng Part H-J Eng Med. March 2014;228(3):258-271.
2015	Jackman TM. Prediction of Vertebral Fractures Under Axial Compression and Anterior Flexion [PhD thesis]. Boston University; 2015.
2010	Garo A. Modélisation du corps vertébral en chargement dynamique: Intégration de l'effet de l'âge [Vertebral Body Modeling in Dynamic Loading: Integration of Age Effects] [PhD thesis]. École polytechnique de Montréal; December 2010.
2011	Wagnac É. Expérimentation et modélisation détaillée de la colonne vertébrale pour étudier le rôle de facteurs anatomiques et biomécaniques sur les traumatismes rachidiens [PhD thesis]. École polytechnique de Montréal; November 2011.
2018	Groenen KHJ. Spinal (in)stability in Metastatic Bone Disease: Experimental, Computational, and Clinical Perspectives [PhD thesis]. Radboud University; 2018.
2018	Costa MC. Prediction of the Risk of Vertebral Fracture in Patients With Metastatic Bone Lesions as a Tool for More Effective Patients’ Management [PhD thesis]. University of Sheffield; November 2018.
2009	Varga P. Prediction of Distal Radius Fracture Load Using HR-PQCT-Based Finite Element Analysis [PhD thesis]. Vienna University of Technology; December 2009.
2012	Dall'Ara E. QCT Based Finite Element Models of the Human Vertebra and Femur: Validation With Experiments and Comparison With Bone Densitometry [PhD thesis]. Vienna University of Technology; October 2012.
2016	Gustafson HM. Quantifying the Response of Vertebral Bodies to Compressive Loading Using Digital Image Correlation [PhD thesis]. Vancouver, BC: University of British Columbia; October 2016.
2020	Michalski AS. A Quantitative Computed Tomography Approach Towards Opportunistic Osteoporosis Screening [PhD thesis]. Calgary, AB: University of Calgary; March 2020.
2014	Chatham LS. Finite Element Modeling of Lumbar Interbody Fusion [Master's thesis]. University of Colorado Denver; 2014.
2011	Burkhart TA. Biomechanics of the Upper Extremity in Response to Dynamic Impact Loading Indicative of a Forward Fall: An Experimental and Numerical Investigation [PhD thesis]. University of Windsor; 2011.
2009	Quenneville CE. Experimental and Numerical Assessments of Injury Criteria for Short-Duration, High-Force Impact Loading of the Tibia [PhD thesis]. University of Western Ontario; December 2009.