In vivo determination of the anatomical axes of the ankle joint complex: an optimization approach

wbldb

van den Bogert, Anton J.¹; Smith, Graham D.¹; Nigg, Benno M.¹

In vivo determination of the anatomical axes of the ankle joint complex: an optimization approach

J Biomech. December 1994;27(12):1477-1488

©1994 Published by Elsevier Ltd.

Affiliations

¹Human Performance Laboratory, University of Calgary, Canada
Abstract

This study investigates the feasibility of a subject-specific three-dimensional model of the ankle joint complex for kinematic and dynamic analysis of movement. The ankle joint complex was modelled as a three-segment system, connected by two ideal highe joints: the talocrural and the subtalar joint. A mathematical formulation was developed to express the three-dimensional translation and rotation between the foot and shank segments as a function of the two joint angles, and 12 model parameters describing the locations of the joint axes. An optimization method was used to fit the model parameters to three-dimensional kinematic data of foot and shank markers, obtained during test movements throughout the entire physiological range of motion of the ankle joint. The movement of the talus segment, which cannot be measured non-invasively, is not necessary for the analysis.

This optimization method was used to determine the position and orientation of the joint axes in 14 normal subjects. After optimization, the discrepancy between the best fitting model and actual marker kinematics was between 1 and 3 mm for all subjects. The predicted inclination of the subtalar joint axis from the horizontal plane was 37.4±2.7°, and the medial deviation was 18.0±16.2°. The lateral side of the talucrural axis was directed slightly posteriorly (6.8±8.1°), and inclined downward by 7.0±5.4°. These results are similar to previously reported typical results from anatomical, in vitro, studies. Reproducibility was evaluated by repeated testing of one subject, which resulted in variations of about one-fifth of the standard deviation within the group, the inclination of the subtalar joint axis was significantly correlated to the arch height and a radiographic ‘tarsal index’. It is concluded that this optimization method provides the opportunity to incorporate inter-individual anatomical differences into kinematic and dynamic analysis of the ankle joint complex. This allows a more functional interpretation of kinematic data, and more realistic estimates of internal forces.
Links

DOI: 10.1016/0021-9290(94)90197-X

PubMed: 7806555

WoS: A1994PM71200008
History

Received: 1993-11-17

Online: 2004-03-23

Cited Works (14)

Year	Entry
1941	Manter JT. Movements of the subtalar and transverse tarsal joints. Anat Rec. August 1941;80(4):397-410.
1982	Procter P, Paul P J. Ankle joint biomechanics. J Biomech. 1982;15(9):627-634.
1981	Clement DB, Taunton JE, Smart GW, McNicol KL. A survey of overuse running injuries. Phys Sportsmed. May 1981;9(5):47-58.
1986	Nigg BM, Bahlsen AH, Denoth J, Luethi SM, Stacoff A. Factors influencing kinetic and kinematic variables in running. In: Nigg BM, ed. Biomechanics of Running Shoes. Champaign, IL: Inc., Human Kinetics Publishers; 1986:139-159.
1988	Chen J, Siegler S, Schneck CD. The three-dimensional kinematics and flexibility characteristics of the human ankle and subtalar joint, II: flexibility characteristics. J Biomech Eng. November 1988;110(4):374-385.
1983	Grood ES, Suntay WJ. A joint coordinate system for the clinical description of three-dimensional motions: application to the knee. J Biomech Eng. May 1983;105(2):136-144.
1986	Woltring HJ. A Fortran package for generalized, cross-validatory spline smoothing and differentiation. Adv Eng Softw. April 1986;8(2):104-113.
1988	Siegler S, Chen J, Schneck CD. The three-dimensional kinematics and flexibility characteristics of the human ankle and subtalar joints, I: kinematics. J Biomech Eng. November 1988;110(4):364-373.
1991	Scott SH, Winter DA. Talocrural and talocalcaneal joint kinematics and kinetics during the stance phase of walking. J Biomech. 1991;24(8):743-752.
1953	Hicks JH. The mechanics of the foot, I: the joints. J Anat. 1953;87(pt 4):345-357.
1976	Inman VT. The Joints of the Ankle. Baltimore, MD: Williams & Wilkins; 1976.
1988	Veldpaus FE, Woltring HJ, Dortmans JMG. A least-squares algorithm for the equiform transformation from spatial marker co-ordinates. J Biomech. 1988;21(1):45-54.
1990	Areblad M, Nigg BM, Ekstrand J, Olsson KO, Ekström H. Three-dimensional measurement of rearfoot motion during running. J Biomech. 1990;23(9):933-940.
1978	James SL, Bates BT, Osternig LR. Injuries to runners. Am J Sports Med. 1978;6(2):40-50.

Cited By (26)

Year	Entry
1999	Leardini A, Benedetti MG, Catani F, Simoncini L, Giannini S. An anatomically based protocol for the description of foot segment kinematics during gait. Clin Biomech (Bristol, Avon). 1999;14(8):528-536.
2000	Leardini A, O'Connor JJ, Catani F, Giannini S. The role of the passive structures in the mobility and stability of the human ankle joint: a literature review. Foot Ankle Int. 2000;21(7):602-615.
2013	Riley PO, Kent RW, Dierks TA, Lievers WB, Frimenko RE, Crandall JR. Foot kinematics and loading of professional athletes in American football-specific tasks. Gait Post. September 2013;38(4):563-569.
2007	Fregly BJ, Reinbolt JA, Rooney KL, Mitchell KH, Chmielewski TL. Design of patient-specific gait modifications for knee osteoarthritis rehabilitation. IEEE Trans Biomed Eng. September 2007;54(9):1687-1695.
2005	Reinbolt JA, Schutte JF, Fregly BJ, Koh BI, Haftka RT, George AD, Mitchell KH. Determination of patient-specific multi-joint kinematic models through two-level optimization. J Biomech. March 2005;38(3):621-626.
2023	Zuppke JN, Bennett HJ, Ringleb SI. The effect of subtalar joint axis location on muscle moment arms. J Biomech. January 2023;147:111451.
2003	McLean SG, Su A, van den Bogert AJ. Development and validation of a 3-D model to predict knee joint loading during dynamic movement. J Biomech. December 2003;125(6):864-874.
2011	Fassbind MJ, Rohr ES, Hu Y, Haynor DR, Siegler S, Sangeorzan BJ, Ledoux WR. Evaluating foot kinematics using magnetic resonance imaging: from maximum plantar flexion, inversion, and internal rotation to maximum dorsiflexion, eversion, and external rotation. J Biomech Eng. October 2011;133(10):104502.
2007	Zhao D, Banks SA, Mitchell KH, D'Lima DD, Colwell CW Jr, Fregly BJ. Correlation between the knee adduction torque and medial contact force for a variety of gait patterns. J Orthop Res. June 2007;25(6):789-797.
2004	McLean SG, Lipfert SW, Van Den Bogert AJ. Effect of gender and defensive opponent on the biomechanics of sidestep cutting. Med Sci Sports Exer. 2004;36(6):1008-1016.
2002	Erdemir A. Load Transfer Mechanisms of the Foot [PhD thesis]. State College, PA: Pennsylvania State University; December 2002.
2021	Vega M. Development and Applications of Neuromusculoskeletal Modeling Software for Personalized Treatment Design [PhD thesis]. Houston, TX: Rice University; 2021.
2005	Siston RA. Orthopaedic Surgical Navigation: Algorithm Development and Clinical Implementation [PhD thesis]. Stanford University; July 2005.
2007	Santos VJ. A Bayesian Approach to Biomechanical Modeling: A Treatise on the Human Thumb [PhD thesis]. Ithaca, NY: Cornell University; May 2007.
1996	Hamilton GR. Joint Congruity and the Congruous Range of Motion Applied to Displaced Intra-Articular Calcaneal Fractures [PhD thesis]. Calgary, AB: University of Calgary; April 1996.
1998	Stacoff AP. Skeletal Lower Extremity Motions During Running [PhD thesis]. Calgary, AB: University of Calgary; August 1998.
2004	Scovil CY. The Viability of a 3D Forward Dynamic Model of Walking as a Research Tool to Enhance Clinical Understanding of Gait Abnormalities [PhD thesis]. Calgary, AB: University of Calgary; March 2004.
2008	Cowder JD. Testing and Application of a Novel Hybrid Combination of Ultrasound and Motion Analysis for Estimation of Achilles Tendon Moment Arms in Vivo [Master's thesis]. University of Delaware; Spring 2008.
2005	Koh BI. Parallel Algorithms for Biomechanical Optimization Problems [PhD thesis]. University of Florida; December 2005.
2005	Schutte JF. Applications of Parallel Global Optimization to Mechanics Problems [PhD thesis]. University of Florida; December 2005.
2006	Reinbolt JA. Patient-Specific Dynamic Modeling to Predict Functional Outcomes [PhD thesis]. University of Florida; May 2006.
2006	Zhao D. Analysis of in Vitro and in Vivo Function of Total Knee Replacements Using Dynamic Contact Models [PhD thesis]. University of Florida; August 2006.
2008	Lin Y-C. Surrogate Based Modeling of Joint Contact Mechanics [PhD thesis]. University of Florida; December 2008.
1998	Bottlang M. Analysis of Constraints and Requirements for the Applicability of Articulated External Fixation [PhD thesis]. University of Iowa; December 1998.
2011	Tian M. Biomechanics of Human Passive Muscles [PhD thesis]. University of New South Wales; 2011.
2016	Lippa NM. Energy Management Mechanisms Employed At the Human-Material Interface of Traditional and Minimalist Shod Running [PhD thesis]. Hattiesburg, MS: University of Southern Mississippi; May 2016.