A combined atomic force microscopy and nanoindentation technique to investigate the elastic properties of bone structural units

wbldb

Hengsberger, S.¹; Kulik, A.²; Zysset, Ph.¹

A combined atomic force microscopy and nanoindentation technique to investigate the elastic properties of bone structural units

Eur Cell Mater. January–June 2001;1:12-17

Affiliations

¹Laboratoire de Mécanique Appliquée et d’analyse de Fiabilité

²Institut de Génie Atomique, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland
Abstract and keywords

To our knowledge, this study applied for the first time a recently developed combination of atomic force microscopy (AFM) and nanoindentation on trabecular and compact bone tissue. The major aim was to check the advantage of the available AFM-mode over the conventionally used optical microscope. First, we investigated if removal of the water content helped to prevent enzymatic degradation of the bone tissue and preserve its mechanical properties during a week. After the positive issue of this test, we quantified the intrinsic mechanical properties of single bone structural units (BSU). Bone specimens were obtained from the femoral neck of an 86 year old female. Four BSU were randomly selected and tested each with 24 indents of 5 mN maximum force.

The available AFM mode proved to be a very useful tool for surface characterization and precise selection of the indentation area. The elastic modulus ranged from 18±1.7 GPa for a BSU of compact bone to 22.5±3.1 GPa for a BSU of trabecular bone. Hardness showed values between 0.6±0.11 GPa for compact bone and 1.1±0.17 GPa for trabecular bone. The results suggest that the micromechanics of bone tissue may also be described as an assembly of distinct structural units with rather homogeneous material properties.

Keywords: Atomic force microscopy; bone structural units; elastic modulus; femur; hardness; nanoindentation
Links

DOI: 10.22203/eCM.v001a02

PubMed: 14562266

Cited Works (17)

Year	Entry
1990	Choi K, Kuhn JL, Ciarelli MJ, Goldstein SA. The elastic moduli of human subchondral, trabecular, and cortical bone tissue and the size-dependency of cortical bone modulus. J Biomech. 1990;23(11):1103-1113.
1993	Katz JL, Meunier A. Scanning acoustic microscope studies of the elastic properties of osteons and osteon lamellae. J Biomech Eng. November 1993;115(4B):543-548.
1990	Evans GP, Behiri JC, Currey JD, Bonfield W. Microhardness and Young's modulus in cortical bone exhibiting a wide range of mineral volume fractions, and in a bone analogue. J Mater Sci Mater Med. June 1990;1(1):38-43.
1966	Sedlin‌ ED, Hirsch C. Factors affecting the determination of the physical properties of femoral cortical bone. Acta Orthop Scand. 1966;37(1):29-48.
1992	Oliver WC, Pharr GM. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res. 1992;7(6):1564-1583.
1964	McElhaney J, Fogle J, Byars E, Weaver G. Effect of embalming on the mechanical properties of beef bone. J Appl Physiol. November 1964;19(6):1234-1236.
1989	Mente PL, Lewis JL. Experimental method for the measurement of the elastic modulus of trabecular bone tissue. J Orthop Res. 1989;7(3):456-461.
1997	Rho J-Y, Tsui TY, Pharr GM. Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation. Biomaterials. 1997;18(20):1325-1330.
1969	Currey JD. The mechanical consequences of variation in the mineral content of bone. J Biomech. March 1969;2(1):1-11.
1993	Rho JY, Ashman RB, Turner CH. Young's modulus of trabecular and cortical bone material: ultrasonic and microtensile measurements. J Biomech. February 1993;26(2):111-119.
1994	Zysset PK, Sonny M, Hayes WC. Morphology-mechanical property relations in trabecular bone of the osteoarthritic proximal tibia. J Arthoplast. 1994;9(2):203-216.
1965	Sneddon IN. The relation between load and penetration in the axisymmetric Boussinesq problem for a punch of arbitrary profile. Int J Eng Sci. May 1965;3(1):47-57.
1999	Zysset PK, Guo XE, Hoffler CE, Moore KE, Goldstein SA. Elastic modulus and hardness of cortical and trabecular bone lamellae measured by nanoindentation in the human femur. J Biomech. October 1999;32(10):1005-1012.
1999	Rho J-Y, Pharr GM. Effects of drying on the mechanical properties of bovine femur measured by nanoindentation. J Mater Sci Mater Med. 1999;10(8):485-488.
1975	Townsend PR, Rose RM, Radin EL. Buckling studies of single human trabeculae. J Biomech. July 1975;8(3-4):199-200.
1989	Ryan SD, Williams JL. Tensile testing of rodlike trabeculae excised from bovine femoral bone. J Biomech. 1989;22(4):351-355.
1999	Rho J-Y, Roy ME II, Tsui TY, Pharr GM. Elastic properties of microstructural components of human bone tissue as measured by nanoindentation. J Biomed Mater Res. 1999;A45(1):48-54.

Cited By (35)

Year	Entry
2008	Nikolov S, Raabe D. Hierarchical modeling of the elastic properties of bone at submicron scales: the role of extrafibrillar mineralization. Biophys J. June 2008;94(11):4220-4232.
2002	Hengsberger S, Kulik A, Zysset P. Nanoindentation discriminates the elastic properties of individual human bone lamellae under dry and physiological conditions. Bone. 2002;30(1):178-184.
2009	Ciarelli TE, Tjhia C, Rao S, Qiu S, Parfitt M, Fyhrie DP. Trabecular packet-level lamellar density patterns differ by fracture status and bone formation rate in white females. Bone. November 2009;45(5):903-908.
2020	Taylor EA, Donnelly E. Raman and Fourier transform infrared imaging for characterization of bone material properties. Bone. October 2020;139:115490.
2022	Farlay D, Falgayrac G, Ponçon C, Rizzo S, Cortet B, Chapurlat R, Penel G, Badoud I, Ammann P, Boivin G. Material and nanomechanical properties of bone structural units of cortical and trabecular iliac bone tissues from untreated postmenopausal osteoporotic women. Bone Rep. December 2022;17:101623.
2016	Hunt HB, Donnelly E. Bone quality assessment techniques: geometric, compositional, and mechanical characterization from macroscale to nanoscale. Clin Rev Bone Miner Metab. September 2016;14(3):133-149.
2020	Zhou Y, Kastner MJ, Tighe TB, Du J. Elastic modulus mapping for bovine cortical bone from submillimeter- to submicron-scales using PeakForce Tapping atomic force microscopy. Extreme Mech Lett. November 1, 2020;41:101031.
2008	Harrison NM, McDonnell PF, O’Mahoney DC, Kennedy OD, O’Brien FJ, McHugh PE. Heterogeneous linear elastic trabecular bone modelling using micro-CT attenuation data and experimentally measured heterogeneous tissue properties. J Biomech. August 7, 2008;41(11):2589-2596.
2005	Akkus O. Elastic deformation of mineralized collagen fibrils: an equivalent inclusion based composite model. J Biomech Eng. June 2005;127(3):383-390.
2006	Dong XN, Guo XE. Prediction of cortical bone elastic constants by a two-level micromechanical model using a generalized self-consistent method. J Biomech Eng. June 2006;128(3):309-316.
2009	Franzoso G, Zysset PK. Elastic anisotropy of human cortical bone secondary osteons measured by nanoindentation. J Biomech Eng. February 2009;131(2):021001.
2006	Donnelly E, Baker SP, Boskey AL, van der Meulen MC. Effects of surface roughness and maximum load on the mechanical properties of cancellous bone measured by nanoindentation. J Biomed Mater Res. May 2006;A77(2):426-435.
2006	Mittra E, Akella S, Qin Y-X. The effects of embedding material, loading rate and magnitude, and penetration depth in nanoindentation of trabecular bone. J Biomed Mater Res. October 2006;A79(1):86-93.
2008	Lewis G, Nyman JS. The use of nanoindentation for characterizing the properties of mineralized hard tissues: state-of-the art review. J Biomed Mater Res. October 2008;B87(1):286-301.
2005	Tai K, Qi HJ, Ortiz C. Effect of mineral content on the nanoindentation properties and nanoscale deformation mechanisms of bovine tibial cortical bone. J Mater Sci Mater Med. October 2005;16(10):947-959.
2016	Georgiadis M, Müller R, Schneider P. Techniques to assess bone ultrastructure organization: orientation and arrangement of mineralized collagen fibrils. J R Soc Interface. June 1, 2016;13(119):20160088.
2009	Zysset PK. Indentation of bone tissue: a short review. Osteoporos Int. June 2009;20(6):1049-1055.
2018	Hunt HB. Characterization of Material Properties, Microarchitecture, and Mechanics of Bone from Subjects With Type 2 Diabetes Mellitus [PhD thesis]. Ithaca, NY: Cornell University; December 2018.
2020	Taylor EA. Validation and Implementation of Vibrational Spectroscopic Measures of Bone Composition [PhD thesis]. Ithaca, NY: Cornell University; December 2020.
2002	Hengsberger S. Mechanical Characterization of Bone from the Tissue Down to the Lamellar Level by Means of Nanoindentation [PhD thesis]. Lausanne, Switzerland: École Polytechnique Fédérale de Lausanne; 2002.
2006	Garcia D. Elastic Plastic Damage Laws for Cortical Bone [PhD thesis]. Lausanne, Switzerland: École Polytechnique Fédérale de Lausanne; 2006.
2007	Akhtar R. Micromechanical Behaviour of Bone [PhD thesis]. University of Manchester; 2007.
2007	Tai K. Nanomechanics and Ultrastructural Studies of Cortical Bone: Fundamental Insights Regarding Structure-Function, Mineral-Organic Force Mechanics Interactions, and Heterogeneity [PhD thesis]. Cambridge, MA: Massachusetts Institute of Technology; June 2007.
2019	Beltejar M-JG. Understanding the Genetic Basis for Bone-Matrix Quality [PhD thesis]. University of Rochester; 2019.
2004	Mittra ES. Assessment of Trabecular Bone Quality Using Microstructure, Micro-Mechanics and Micro-Finite Element Modeling [PhD thesis]. Stony Brook, NY: Stony Brook University; May 2004.
2009	Ferreri SL. Anti-Catabolic Role of Ultrasonic Mechanical Perturbation in Prevention of Bone Loss and Turnover in OVX Rat Model: A Combined Empirical, Nanomechanical and Micro-Numerical Simulation Approach [PhD thesis]. Stony Brook, NY: Stony Brook University; August 2009.
2013	Wang Y-K. Multi-Level Micromechanical Modeling of Bone Tissues [PhD thesis]. Los Angeles, CA: Los Angeles, University of California; 2013.
2009	Sahar ND. Investigating the Effects of Age and Exercise on Bone Composition and the Impact of Composition on Mechanical Integrity. [PhD thesis]. University of Michigan; 2009.
2014	Schwiedrzik JJ. Experimental, Theoretical and Numerical Investigation of the Nonlinear Micromechanical Properties of Bone [PhD thesis]. Universität Bern; 2014.
2010	Wald MJ. Mapping Trabecular Bone Fabric Tensor by in Vivo Magnetic Resonance Imaging [PhD thesis]. Philadelphia, PA: University of Pennsylvania; 2010.
2015	Lin C-L. A Study of Human and Bovine Trabecular Bones Using Nanoindentation and Quantitative Backscattered Electron Imaging [PhD thesis]. Brisbane, Australia: University of Queensland; 2015.
2016	Lin C-l. A Study of Human and Bovine Trabecular Bones Using Nanoindentation and Quantitative Backscattered Electron Imaging [PhD thesis]. Brisbane, Australia: University of Queensland; 2016.
2011	Islam A. Mechanistic Model of Nanoscratch Test to Determine the in Situ Toughness of Bone [Master's thesis]. San Antionio, TX: University of Texas at San Antonio; May 2011.
2015	Xu H. The Coupling Effect of Water and GAGs on the in Situ Toughness of Bone Are Age-Dependent [Master's thesis]. San Antionio, TX: University of Texas at San Antonio; December 2015.
2020	Hamandi FMRA. Hierarchical Structure, Properties and Bone Mechanics At Macro, Micro, and Nano Levels [PhD thesis]. Dayton, OH: Wright State University; 2020.