HR-pQCT based FE analysis of the most distal radius section provides an improved prediction of Colles' fracture load in vitro

wbldb

Varga, Peter¹; Pahr, Dieter H.¹; Baumbach, Sebastian²; Zysset, Philippe K.¹

HR-pQCT based FE analysis of the most distal radius section provides an improved prediction of Colles' fracture load in vitro

Bone. November 2010;47(5):982-988

©2010 Elsevier Inc. All rights reserved.

Affiliations

¹Institute of Lightweight Design and Structural Biomechanics, Vienna University of Technology, Gußhausstraße 27-29, A-1040 Vienna, Austria

²Medical University of Vienna, Währinger Gürtel 18-20, A-1090 Vienna, Austria
Abstract and keywords

The remarkable performances of high-resolution peripheral quantitative computed tomography (HR-pQCT) make the distal radius a favorable site for early diagnosis of osteoporosis and improved Colles' fracture risk assessment. The goal of this study was to investigate if the HR-pQCT-based micro finite element (μFE) method applied on specific sections of the distal radius provides improved predictions of Colles' fracture load in vitro compared to bone mineral content (BMC), bone mineral density (BMD), or histomorphometric indices. HR-pQCT based BMC, BMD, histomorphometric parameters, and μFE models of 9-mm-thick bone sections were used to predict fracture load of 21 distal radii assessed in an experimental model of Colles' fracture reported in a previous study. The analysis was performed on two bone sections: a standard one recommended by the HR-pQCT manufacturer and a second one defined just proximal to the distal subchondral plate. For most of the investigated parameters, significant differences were found between the values of the two sections. Correlations with experimental fracture load and strength were higher in the most distal section, and the difference was statistically significant for μFE strength. Furthermore, the most distal section was computed to have significantly lower ultimate force and strength by 13% and 35%, respectively, than the standard section. BMC provided a better estimation of Colles' fracture load (R² = 0.942) than aBMD or any other histomorphometric indices. The best prediction was achieved with μFE analyses of the most distal slice (R² = 0.962), which provided quantitatively correct ultimate forces.

Keywords: Colles' fracture; Distal radius; HR-pQCT; Finite element method; Osteoporosis
Links

DOI: 10.1016/j.bone.2010.08.002

PubMed: 20692389

WoS: 000283282000017
History

Received: 2009-08-19

Revised: 2010-08-2

Accepted: 2010-08-2

Online: 2010-08-6

Cited Works (29)

Year	Entry
2009	Mueller TL, van Lenthe GH, Stauber M, Gratzke C, Eckstein F, Müller R. Regional, age and gender differences in architectural measures of bone quality and their correlation to bone mechanical competence in the human radius of an elderly population. Bone. November 2009;45(5):882-891.
2008	MacNeil JA, Boyd SK. Bone strength at the distal radius can be estimated from high-resolution peripheral quantitative computed tomography and the finite element method. Bone. June 2008;42(6):1203-1213.
2002	Pistoia W, van Rietbergen B, Lochmüller E-M, Lill CA, Eckstein F, Rüegsegger P. Estimation of distal radius failure load with micro-finite element analysis models based on three-dimensional peripheral quantitative computed tomography images. Bone. June 2002;30(6):842-848.
2004	Pistoia W, van Rietbergen B, Lochmüller E-M, Lill CA, Eckstein F, Rüegsegger P. Image-based micro-finite-element modeling for improved distal radius strength diagnosis: moving from “bench” to “bedside”. J Clin Densitom. Summer 2004;7(2):153-160.
2008	Boutroy S, Van Rietbergen B, Sornay-Rendu E, Munoz F, Bouxsein ML, Delmas PD. Finite element analysis based on in vivo HR-pQCT images of the distal radius is associated with wrist fracture in postmenopausal women. J Bone Miner Res. March 2008;23(3):392-399.
2003	Muller ME, Webber CE, Bouxsein ML. Predicting the failure load of the distal radius. Osteoporos Int. June 2003;14(4):345-352.
2006	Verhulp E, van Rietbergen B, Huiskes R. Comparison of micro-level and continuum-level voxel models of the proximal femur. J Biomech. 2006;39(16):2951-2957.
2004	Schuit SCE, van der Klift M, Weel AEAM, de Laet CEDH, Burger H, Seeman E, Hofman A, Uitterlinden AG, van Leeuwen JPTM, Pols HAP. Fracture incidence and association with bone mineral density in elderly men and women: the Rotterdam Study. Bone. January 2004;34(1):195-202.
1997	Laib A, Hildebrand T, Häuselmann HJ, Rüegsegger P. Ridge number density: a new parameter for in vivo bone structure analysis. Bone. December 1997;21(6):541-546.
2005	Boutroy S, Bouxsein ML, Munoz F, Delmas PD. In vivo assessment of trabecular bone microarchitecture by high-resolution peripheral quantitative computed tomography. J Clin Endocrinol Metab. December 2005;90(12):6508-6515.
2009	Pahr DH, Zysset PK. From high-resolution CT data to finite element models: development of an integrated modular framework. Comput Methods Biomech Biomed Eng. 2009;12(1):45-57.
2008	Arbenz P, van Lenthe GH, Mennel U, Müller R, Sala M. A scalable multi‐level preconditioner for matrix‐free µ‐finite element analysis of human bone structures. Int J Num Meth Eng. February 12, 2008;73(7):927-947.
2009	Pahr DH, Zysset PK. A comparison of enhanced continuum FE with micro FE models of human vertebral bodies. J Biomech. March 11, 2009;42(4):455-462.
2002	Cummings SR, Bates D, Black DM. Clinical use of bone densitometry: scientific review. JAMA. October 16, 2002;288(15):1889-1897.
2009	Mueller TL, Stauber M, Kohler T, Eckstein F, Müller R, van Lenthe GH. Non-invasive bone competence analysis by high-resolution pQCT: an in vitro reproducibility study on structural and mechanical properties at the human radius. Bone. February 2009;44(2):364-371.
1994	Keaveny TM, Wachtel EF, Ford CM, Hayes WC. Differences between the tensile and compressive strengths of bovine tibial trabecular bone depend on modulus. J Biomech. 1994;27(9):1137-1146.
2000	Hoffler CE, Moore KE, Kozloff K, Zysset PK, Brown MB, Goldstein SA. Heterogeneity of bone lamellar-level elastic moduli. Bone. June 2000;26(6):603-609.
1999	Laib A, Rüegsegger P. Comparison of structure extraction methods for in vivo trabecular bone measurements. Comput Vis Image Understand. March–April 1999;23(2):69-74.
1983	Parfitt AM, Mathews CH, Villanueva AR, Kleerekoper M, Frame B, Rao DS. Relationships between surface, volume, and thickness of iliac trabecular bone in aging and in osteoporosis: implications for the microanatomic and cellular mechanisms of bone loss. J Clin Invest. October 1983;72(4):1396-1409.
2007	Buie HR, Campbell GM, Klinck RJ, MacNeil JA, Boyd SK. Automatic segmentation of cortical and trabecular compartments based on a dual threshold technique for in vivo micro-CT bone analysis. Bone. October 2007;41(4):505-515.
1999	Cuddihy M-T, Gabriel SE, Crowson CS, O’Fallon WM, Melton LJ III. Forearm fractures as predictors of subsequent osteoporotic fractures. Osteoporos Int. June 1999;9(6):469-475.
2009	Varga P, Baumbach S, Pahr D, Zysset PK. Validation of an anatomy specific finite element model of Colles’ fracture. J Biomech. August 7, 2009;42(11):1726-1731.
1998	Augat P, Iida H, Jiang Y, Diao E, Genant HK. Distal radius fractures: mechanisms of injury and strength prediction by bone mineral assessment. J Orthop Res. August 1998;16(5):629-635.
1994	Spadaro JA, Werner FW, Brenner RA, Fortino MD, Fay LA, Edwards WT. Cortical and trabecular bone contribute strength to the osteopenic distal radius. J Orthop Res. March 1994;12(2):211-218.
2007	Sornay‐Rendu E, Boutroy S, Munoz F, Delmas PD. Alterations of cortical and trabecular architecture are associated with fractures in postmenopausal women, partially independent of decreased BMD measured by DXA: the OFELY study. J Bone Miner Res. March 2007;22(3):425-433.
2005	Sornay-Rendu E, Munoz F, Garnero P, Duboeuf F, Delmas PD. Identification of osteopenic women at high risk of fracture: the OFELY study. J Bone Miner Res. October 2005;20(10):1813-1819.
2009	Franzoso G, Zysset PK. Elastic anisotropy of human cortical bone secondary osteons measured by nanoindentation. J Biomech Eng. February 2009;131(2):021001.
2007	Melton LJ, Riggs BL, van Lenthe GH, Achenbach SJ, Müller R, Bouxsein ML, Amin S, Atkinson EJ, Khosla S. Contribution of in vivo structural measurements and load/strength ratios to the determination of forearm fracture risk in postmenopausal women. J Bone Miner Res. September 2007;22(9):1442-1448.
1998	Laib A, Häuselmann HJ, Rüegsegger P. In vivo high resolution 3D-QCT of the human forearm. Technol Health Care. 1998;6(5-6):329-337.

Cited By (29)

Year	Entry
2021	Casari D, Michler J, Zysset P, Schwiedrzik J. Microtensile properties and failure mechanisms of cortical bone at the lamellar level. Acta Biomater. January 15, 2021;120:135-145.
2020	Varga P, Willie BM, Stephan C, Kozloff KM, Zysset PK. Finite element analysis of bone strength in osteogenesis imperfecta. Bone. April 2020;133:115250.
2020	Schenk D, Mathis A, Lippuner K, Zysset P. In vivo repeatability of homogenized finite element analysis based on multiple HR-pQCT sections for assessment of distal radius and tibia strength. Bone. December 2020;141:115575.
2022	Revel M, Bermond F, Duboeuf F, Mitton D, Follet H. Influence of loading conditions in finite element analysis assessed by HR–pQCT on ex vivo fracture prediction. Bone. January 2022;154:116206.
2022	Mys K, Stockmans F, Gueorguiev B, Wyers CE, van den Bergh JP, van Lenthe GH, Varga P. Adaptive local thresholding can enhance the accuracy of HR-pQCT-based trabecular bone morphology assessment. Bone. January 2022;154:116225.
2022	Uppuganti S, Ketsiri T, Zhang Y, Does MD, Nyman JS. HR-pQCT parameters of the distal radius correlate with the bending strength of the radial diaphysis. Bone. August 2022;161:116429.
2013	Zysset PK, Dall'Ara E, Varga P, Pahr DH. Finite element analysis for prediction of bone strength. BoneKEy Rep. August 2013;2:386.
2013	Cheung AM, Adachi JD, Hanley DA, Kendler DL, Davison KS, Josse R, Brown JP, Ste-Marie L-G, Kremer R, Erlandson MC, Dian L, Burghardt AJ, Boyd SK. High-resolution peripheral quantitative computed tomography for the assessment of bone strength and structure: a review by the Canadian Bone Strength Working Group. Curr Osteoporos Rep. June 2013;11(2):136-146.
2015	van Rietbergen B, Ito K. A survey of micro-finite element analysis for clinical assessment of bone strength: the first decade. J Biomech. March 18, 2015;48(5):832-841.
2021	Stipsitz M, Zysset PK, Pahr DH. Prediction of the inelastic behaviour of radius segments: damage-based nonlinear micro finite element simulation vs Pistoia criterion. J Biomech. February 12, 2021;116:110205.
2023	Dao T, Robinson DL, Doyle LW, Lee PVS, Olsen J, Kale A, Cheong JLY, Wark JD. Quantifying bone strength deficits in young adults born extremely preterm or extremely low birth weight. J Bone Miner Res. December 2023;38(12):1800-1808.
2023	Schlickewei C, Schweizer C, Püschel K, Ondruschka B, Kleinertz H, Barg A, Rolvien T, Stürznickel J. Age-, sex-, and subregion-specific properties of distal fibular microarchitecture and strength: an ex vivo HR-pQCT study. J Orthop Res. February 2023;41(2):355-363.
2020	Whittier DE, Boyd SK, Burghardt AJ, Paccou J, Ghasem-Zadeh A, Chapurlat R, Engelke K, Bouxsein ML. Guidelines for the assessment of bone density and microarchitecture in vivo using high-resolution peripheral quantitative computed tomography. Osteoporos Int. September 2020;31(9):1607-1627.
2020	Stuck AK, Schenk D, Zysset P, Bütikofer L, Mathis A, Lippuner K. Reference values and clinical predictors of bone strength for HR-pQCT-based distal radius and tibia strength assessments in women and men. Osteoporos Int. October 2020;31(10):1913-1923.
2011	Miller RM. Mechanobiological Investigation of Periosteum Through Finite Element Modeling and Histology [Master's thesis]. Cleveland, OH: Case Western Reserve University; August 2011.
2015	Zhou B. Bone Quality Assessment Using High Resolution Peripheral Quantitative Computed Tomography (HR-PQCT) [PhD thesis]. Columbia University; 2015.
2019	Groetsch A. Micro- and Nanomechanics of Mineralised Collagen Fibre Elasto-Plasticity [PhD thesis]. Ebinburgh, Scotland: Heriot-Watt University; November 2019.
2019	Du J. Mechanical Adaptation of Human Trabecular Bone: Experimental and Computational Study [PhD thesis]. Loughborough University; 2019.
2016	Chen Y. Verification and Validation of MicroCT-Based Finite Element Models of Bone Tissue Biomechanics [PhD thesis]. Sheffield, UK: University of Sheffield; July 2016.
2013	Christen P. Deciphering the Secret Message Within Bone Microstructure [PhD thesis]. Eindhoven University of Technology; 2013.
2011	Spiesz EM. Experimental and Computational Micromechanics of Mineralized Tendon and Bone [PhD thesis]. Vienna University of Technology; October 2011.
2014	Gross T. Development and Application of 3d CT Image-Based Micro and Macro Finite Element Models for Human Bones and Orthopedic Implant Systems [PhD thesis]. Vienna University of Technology; 2014.
2020	Stipsitz M. Development of a Nonlinear Micro Finite Element Framework for Image-Based Simulations in Bone Biomechanics [PhD thesis]. Vienna University of Technology; 2020.
2021	Frank M. Mechanical Characterization of Individual Trabeculae [PhD thesis]. Vienna University of Technology; February 2021.
2021	Whittier DEW. The Assessment of Fragility Fracture Risk Using HR-PQCT as a Novel Tool for Diagnosis of Osteoporosis [PhD thesis]. Calgary, AB: University of Calgary; August 2021.
2016	McDonald MP. Predicting Distal Radius Failure Load During a Fall Using Mechanical Testing and Peripheral Quantitative Computed Tomography [Master's thesis]. University of Saskatchewan; December 2016.
2018	Hosseinitabatabaei S. High-Resolution Peripheral Quantitative Computed Tomography Based Finite Element Modelling of Distal Radius Strength: Assessing Effect of Heterogeneous Material Properties and Scan Site [Master's thesis]. University of Saskatchewan; October 2018.
2020	Bunyamin ATO. Predicting Off-Axis Bone Strength of the Distal Radius Using High-Resolution Peripheral Quantitative Computed Tomography Based Finite Element Modeling [Master's thesis]. University of Saskatchewan; March 2020.
2023	Egeonu IET. Bone Microstructure and Bone Strength At the Distal Radius in Relation to the Pubertal Growth Spurt in Adolescence [Master's thesis]. University of Saskatchewan; July 2023.