Tensile and compressive properties of cancellous bone

Røhl, Lisbeth; Larsen, Ejnar; Linde, Frank; Odgaard, Anders; Jørgensen, Jørgen

Year	Entry
2002	Currey JD. Bones: Structure and Mechanics. Princeton, NJ: Princeton University Press; 2002.
1994	Linde F. Elastic and viscoelastic properties of trabecular bone by a compression testing approach. Dan Med Bull. April 1994;41(2):119-138.
1998	Martin RB, Burr DB, Sharkey NA. Skeletal Tissue Mechanics. New York, NY: Springer-Verlag; 1998.
2000	Ding M. Age variations in the properties of human tibial trabecular bone and cartilage. Acta Orthop Scand. 2000;71(suppl 292):1-45.
2007	Perilli E, Baleani M, Öhman C, Baruffaldi F, Viceconti M. Structural parameters and mechanical strength of cancellous bone in the femoral head in osteoarthritis do not depend on age. Bone. November 2007;41(5):760-768.
2010	Lievers WB, Petryshyn AC, Poljsak AS, Waldman SD, Pilkey AK. Specimen diameter and "side artifacts" in cancellous bone evaluated using end-constrained elastic tension. Bone. August 2010;47(2):371-377.
2013	Hambli R. Micro-CT finite element model and experimental validation of trabecular bone damage and fracture. Bone. October 2013;56(2):363-374.
2018	Zhao S, Arnold M, Ma S, Abel RL, Cobb JP, Hansen U, Boughton O. Standardizing compression testing for measuring the stiffness of human bone. Bone Joint Res. August 2018;7(8):524-538.
2008	Verhulp E, Van Rietbergen B, Müller R, Huiskes R. Micro-finite element simulation of trabecular-bone post-yield behaviour: effects of material model, element size and type. Comput Methods Biomech Biomed Eng. August 2008;11(4):389-395.
2020	Januddi F, Harun MN, Syahrom A, Bakri A, Alkbir MFM. Effect of including periodic boundary condition on the fatigue behaviour of cancellous bone. Int J Integr Eng. 2020;12(5):70-80.
1992	Linde F, Hvid I, Madsen F. The effect of specimen geometry on the mechanical behaviour of trabecular bone specimens. J Biomech. 1992;25(4):359-368.
1993	Keaveny TM, Borchers RE, Gibson LJ, Hayes WC. Theoretical analysis of the experimental artifact in trabecular bone compressive modulus [published correction appears in J Biomech. 1993;26(9):1143]. J Biomech. April–May 1993;26(4-5):599-607.
1994	Keaveny TM, Guo XE, Wachtel EF, McMahon TA, Hayes WC. Trabecular bone exhibits fully linear elastic behavior and yields at low strains. J Biomech. 1994;27(9):1127-1136.
1994	Keaveny TM, Wachtel EF, Ford CM, Hayes WC. Differences between the tensile and compressive strengths of bovine tibial trabecular bone depend on modulus. J Biomech. 1994;27(9):1137-1146.
1996	Ford CM, Keaveny TM. The dependence of shear failure properties of trabecular bone on apparent density and trabecular orientation. J Biomech. 1996;29(10):1309-1317.
1998	Kopperdahl DL, Keaveny TM. Yield strain behavior of trabecular bone. J Biomech. July 1998;31(7):601-608.
1998	Ulrich D, van Rietbergen B, Weinans H, Rüegsegger P. Finite element analysis of trabecular bone structure: a comparison of image-based meshing techniques. J Biomech. December 1998;31(12):1187-1192.
2006	Ün K, Bevill G, Keaveny TM. The effects of side-artifacts on the elastic modulus of trabecular bone. J Biomech. 2006;39(11):1955-1963.
2007	Troy KL, Grabiner MD. Off-axis loads cause failure of the distal radius at lower magnitudes than axial loads: a finite element analysis. J Biomech. 2007;40(8):1670-1675.
2007	Bessho M, Ohnishi I, Matsuyama J, Matsumoto T, Imai K, Nakamura K. Prediction of strength and strain of the proximal femur by a CT-based finite element method. J Biomech. 2007;40(8):1745-1753.
2008	Verhulp E, van Rietbergen B, Müller R, Huiskes R. Indirect determination of trabecular bone effective tissue failure properties using micro-finite element simulations. J Biomech. 2008;41(7):1479-1485.
1993	Keaveny TM, Hayes WC. A 20-year perspective on the mechanical properties of trabecular bone. J Biomech Eng. November 1993;115(4B):534-542.
2001	Morgan EF, Yeh OC, Chang WC, Keaveny TM. Nonlinear behavior of trabecular bone at small strains. J Biomech Eng. February 2001;123(1):1-9.
2002	Niebur GL, Feldstein MJ, Keaveny TM. Biaxial failure behavior of bovine tibial trabecular bone. J Biomech Eng. December 2002;124(6):699-705.
2011	Edwards WB, Troy KL. Simulating distal radius fracture strength using biomechanical tests: a modeling study examining the influence of boundary conditions. J Biomech Eng. November 2011;133(11):114501.
2015	Oftadeh R, Perez-Viloria M, Villa-Camacho JC, Vaziri A, Nazarian A. Biomechanics and mechanobiology of trabecular bone: a review. J Biomech Eng. January 2015;137(1):010802.
1996	Keyak JH, Lee IY, Nath DS, Skinner HB. Postfailure compressive behavior of tibial trabecular bone in three anatomic directions. J Biomed Mater Res. July 1996;31(3):373-378.
2006	Akhtar R, Eichhorn SJ, Mummer PM. Microstructure-based finite element modelling and characterisation of bovine trabecular bone. J Bionic Eng. 2006;3(1):3-9.
2009	Barak MM, Currey JD, Weiner S, Shahar R. Are tensile and compressive Young’s moduli of compact bone different? J Mech Behav Biomed Mater. January 2009;2(1):51-60.
2010	Lievers WB, Waldman SD, Pilkey AK. Minimizing specimen length in elastic testing of end-constrained cancellous bone. J Mech Behav Biomed Mater. January 2010;3(1):22-30.
2012	Kelly N, McGarry JP. Experimental and numerical characterisation of the elasto-plastic properties of bovine trabecular bone and a trabecular bone analogue. J Mech Behav Biomed Mater. May 2012;9:184-197.
2020	Zhai X, Nauman EA, Moryl D, Lycke R, Chen WW. The effects of loading-direction and strain-rate on the mechanical behaviors of human frontal skull bone. J Mech Behav Biomed Mater. March 2020;103:103597.
2020	Fleps I, Bahaloo H, Zysset PK, Ferguson SJ, Pálsson H, Helgason B. Empirical relationships between bone density and ultimate strength: a literature review. J Mech Behav Biomed Mater. October 2020;110:103866.
1999	Chang WCW, Christensen TM, Pinilla TP, Keaveny TM. Uniaxial yield strains for bovine trabecular bone are isotropic and asymmetric. J Orthop Res. July 1999;17(4):582-585.
1999	Bruyère Garnier K, Dumas R, Rumelhart C, Arlot ME. Mechanical characterization in shear of human femoral cancellous bone: torsion and shear tests. Med Eng Phys. November 1999;21(9):641-649.
2010	Lievers WB, Poljsak AS, Waldman SD, Pilkey AK. Effects of dehydration-induced structural and material changes on the apparent modulus of cancellous bone. Med Eng Phys. 2010;32(8):921-925.
2012	Edwards WB, Troy KL. Finite element prediction of surface strain and fracture strength at the distal radius. Med Eng Phys. April 2012;34(3):290-298.
2010	Cristofolini L, Schileo E, Juszczyk M, Taddei F, Martelli S, Viceconti M. Mechanical testing of bones: the positive synergy of finite–element models and in vitro experiments. Philos Trans R Soc A-Math Phys Eng Sci. June 13, 2010;368(1920):2725-2763.
2011	Guérard S, Chevalier Y, Moreschi H, Defontaine M, Callé S, Mitton D. Young’s modulus repeatability assessment using cycling compression loading on cancellous bone. Proc Inst Mech Eng Part H-J Eng Med. November 2011;225(11):1113-1117.
2020	Salem M, Westover L, Adeeb S, Duke K. Prediction of failure in cancellous bone using extended finite element method. Proc Inst Mech Eng Part H-J Eng Med. September 2020;243(9):988-999.
1999	Taylor WR. A Computer Based Technique for Predicting Changes in Bone Properties With Applications in Pre-Clinical Testing of Hip Implants [PhD thesis]. University of Bath; 1999.
2007	Liu XS. High-Resolution Image Based Micro-Mechanical Modeling of Trabecular Bone [PhD thesis]. Columbia University; 2007.
2007	Cole JH. The Role of Architecture and Tissue Properties in the Structural Integrity of Human Vertebral Cancellous Bone [PhD thesis]. Ithaca, NY: Cornell University; May 2007.
2005	Cook RB. Non-Invasively Assessed Skeletal Bone Status and Its Relationship to the Biomechanical Properties and Condition of Cancellous Bone [PhD thesis]. Cranfield, UK: Cranfield University; December 18, 2005.
2004	İnceoğlu S. Failure of Pedicle Screw-Bone Interface: Biomechanics of Pedicle Screw Insertion and Pullout [PhD thesis]. Cleveland State University; December 2004.
2006	Garcia D. Elastic Plastic Damage Laws for Cortical Bone [PhD thesis]. Lausanne, Switzerland: École Polytechnique Fédérale de Lausanne; 2006.
2010	Feng L. Multi-Scale Characterization of Swine Femoral Cortical Bone and Long Bone Defect Repair by Regeneration [PhD thesis]. University of Illinois at Urbana-Champaign; 2010.
2002	Follet H. Caractérisation Biomécanique Et Modélisation 3D Par Imagerie X Et IRM Haute Résolution De L’os Spongieux Humain: Evaluation Du Risque Fracturaire [PhD thesis]. Institut national des sciences appliquées de Lyon (INSA Lyon); 2002.
2008	Jaumard N. Mechanical and Electromechanical Characterization of a Novel Composite Cellular Solid for Orthopaedic Applications [PhD thesis]. Lawrence, KS: University of Kansas; 2008.
2020	Bennison MBL. The Role of Cancellous Bone Architecture in Misalignment and Side Effect Errors [Master's thesis]. Sudbury, ON: Laurentian University; 2020.
1996	Ford CM. Failure of the Human Proximal Femur: Material and Structural Perspectives [PhD thesis]. Cambridge, MA: Massachusetts Institute of Technology; September 1996.
2015	Oftadeh R. Hierarchical Analysis and Multiscale Modelling of Cellular Structures: From Meta Materials to Bone Structure [PhD thesis]. Northeastern University; December 2015.
2012	Kelly N. An Experimental and Computational Investigation of the Inelastic Behaviour of Trabecular Bone [PhD thesis]. Galway, Ireland: National University of Ireland Galway; September 2012.
2015	Chana NK. Development of a 3D Perfusion System to Monitor Response of Osteoblast-Like Cells Incubated on Synthetic Bone Graft Substitute Granules With Varied Hierarchical Porosities Under Dynamic Conditions [PhD thesis]. Queen Mary University of London; September 2015.
2005	Buie HR. Use of Finite Element Method Modelling and Rapid Prototyping to Study the Effect of Trabecular Bone Architecture on Apparent Mechanical Properties [Master's thesis]. Queen's University; November 2005.
2009	Lievers WB. Effects of Geometric and Material Property Changes on the Apparent Elastic Properties of Cancellous Bone [PhD thesis]. Queen's University; April 2009.
2011	Yao H. Microstructure-Based Characterization and Modeling of Trabecular Bone Deformation and Failure [PhD thesis]. Southern Methodist University; August 3, 2011.
2004	Prommin D. Compressive Behavior of Trabecular Bone in the Proximal Tibia Using a Cellular Solid Model [PhD thesis]. Texas A&M University; August 2004.
2006	Verhulp E. Analyses of Trabecular Bone Failure [PhD thesis]. Eindhoven, The Netherlands: Eindhoven University of Technology; 2006.
2012	Dall'Ara E. QCT Based Finite Element Models of the Human Vertebra and Femur: Validation With Experiments and Comparison With Bone Densitometry [PhD thesis]. Vienna University of Technology; October 2012.
2020	Salem M. Investigation of Pelvic Bone Fracture Mechanism and Simulated Treatment [PhD thesis]. Edmonton, AB: University of Alberta; 2020.
2013	Andrews S. Meniscus Structure and Function [PhD thesis]. Calgary, AB: University of Calgary; January 2013.
1998	Kopperdahl DL. Structural Consequences of Damage on the Mechanical Behavior of the Human Vertebral Body [PhD thesis]. Berkeley, CA: Berkeley, University of California; 1998.
2002	Morgan EF-i. The Dependence on Anatomic Site of Trabecular Bone Structure-Function Relationships [PhD thesis]. Berkeley, CA: Berkeley, University of California; 2002.
2008	Bevill GR. Micromechanical Modeling of Failure in Trabecular Bone [PhD thesis]. Berkeley, CA: Berkeley, University of California; 2008.
2011	Ferreira JNAR. Engineering Hydroxyapatite-Gelatin Nanocomposites With MAPC Cells for Calvarium Bone Regeneration [PhD thesis]. University of North Carolina at Chapel Hill; 2011.
2011	Shin J. Injury and Response of Human Ankle and Subtalar Joints Under Complex Loading [PhD thesis]. Charlottesville, VA: University of Virginia; December 2011.
2008	Burgers TA. Press-Fit Fixation and Viscoelastic Response of a Bone-Implant Interface in the Distal Femur [PhD thesis]. University of Wisconsin – Madison; 2008.
1992	Oxland TR. Burst Fractures of the Human Thoracolumbar Spine: A Biomechanical Investigation [PhD thesis]. New Haven, CT: Yale University; May 1992.

Year	Entry
1987	Mosekilde L, Mosekilde L, Danielsen CC. Biomechanical competence of vertebral trabecular bone in relation to ash density and age in normal individuals. Bone. 1987;8(2):79-85.
1983	Stone JL, Beaupre GS, Hayes WC. Multiaxial strength characteristics of trabecular bone. J Biomech. 1983;16(9):743-752.
1989	Ashman RB, Rho JY, Turner CH. Anatomical variation of orthotropic elastic moduli of the proximal human tibia. J Biomech. 1989;22(8-9):895-900.
1989	Linde F, Hvid I. The effect of constraint on the mechanical behaviour of trabecular bone specimens. J Biomech. 1989;22(5):485-490.
1983	Neil JL, Demos TC, Stone JL, Hayes WC. Tensile and compressive properties of vertebral trabecular bone. In: Transacation of the 29th Annual Meeting of the Orthopaedic Research Society. March 8-10, 1983; Anaheim, CA.344.
1987	Bentzen SM, Hvid I, Jorgensen J. Mechanical strength of tibial trabecular bone evaluated by X-ray computed tomography. J Biomech. 1987;20(8):743-752.
1991	Odgaard A, Linde F. The underestimation of Young's modulus in compressive testing of cancellous bone specimens. J Biomech. 1991;24(8):691-698.
1988	Brear K, Currey JD, Raines S, Smith KJ. Density and temperature effects on some mechanical properties of cancellous bone. Eng Med. October 1988;17(4):163-167.
1985	Kaplan SJ, Hayes WC, Stone JL, Beaupré GS. Tensile strength of bovine trabecular bone. J Biomech. 1985;18(9):723-727.
1989	Linde F, Hvid I, Pongsoipetch B. Energy absorptive properties of human trabecular bone specimens during axial compression. J Orthop Res. May 1989;7(3):432-439.
1961	Evans FG, King AI. Regional differences in some physical properties of human spongy bone. In: Evans FG, ed. Biomechanical Studies of the Musculo-Skeletal System. Springfield, IL: Charles C. Thomas; 1961:49-67.
1988	Rice JC, Cowin SC, Bowman JA. On the dependence of the elasticity and strength of cancellous bone on apparent density. J Biomech. 1988;21(2):155-168.
1987	Linde F, Hvid I. Stiffness behaviour of trabecular bone specimens. J Biomech. 1987;20(1):83-89.
1983	Bensusan JS, Davy DT, Heiple KG, Verdin KG. Tensile, compressive and torsional testing of cancellous bone. In: Transacation of the 29th Annual Meeting of the Orthopaedic Research Society. March 8-10, 1983; Anaheim, CA.132.
1980	Carter DR, Schwab GH, Spengler DM. Tensile fracture of cancellous bone. Acta Orthop Scand. 1980;51(5):733-741.
1989	Hvid I, Bentzen SM, Linde F, Mosekilde L, Pongsoipetch B. X-ray quantitative computed tomography: the relations to physical properties of proximal tibial trabecular bone specimens. J Biomech. 1989;22(8-9):837-844.
1977	Ducheyne P, Heymans L, Martens M, Aernoudt E, Meester Pd, Mulier JC. The mechanical behaviour of intracondylar cancellous bone of the femur at different loading rates. J Biomech. 1977;10(11-12):747-762.