| 2007 |
Wang YJ. Curvature Gouge Detection and Prevention in 5-Axis CNC Machining [PhD thesis]. University of Victoria; 2007. |
1 |
0 |
| 2002 |
Pharoah JG. Fluid Dynamics and Mass Transport in Rotating Channels With Application to Centrifugal Membrane Separation [PhD thesis]. University of Victoria; 2002. |
1 |
0 |
| 2002 |
Chen ZC. Optimal and Intelligent Multi-Axis CNC Tool Path Generation for Sculptured Part Machining [PhD thesis]. University of Victoria; 2002. |
2 |
0 |
| 1999 |
Lycon DS. Flux Enhancement and Fouling Reduction in a Centrifugal Membrane Process [PhD thesis]. University of Victoria; 1999. |
1 |
0 |
| 1999 |
Chan VH. Feature Based Reverse Engineering Employing Automated Multi-Sensor Scanning [PhD thesis]. University of Victoria; 1999. |
0 |
0 |
| 1999 |
Bergen AP. Membrane Performance in a Centrifugal Environment and the Implications for CMDS Rotor Development [Master's thesis]. University of Victoria; 1999. |
1 |
0 |
| 1997 |
Pharoah JG. Computational Modeling of Centrifugal Membrane and Density Separation [Master's thesis]. University of Victoria; 1997. |
3 |
0 |
| 1997 |
Byrnes PWG. The CMDS Flow-Rate and Conductivity Transducer: Design, Manufacture and Testing [Master's thesis]. University of Victoria; 1997. |
2 |
0 |
| 1996 |
Pazder JS. The Optical Design of an Adaptive Optics System Imaging Two Selectable Atmospheric Layers [Master's thesis]. University of Victoria; 1996. |
0 |
0 |
| 1996 |
Li H. Intelligent Rough Machining of Sculptured Parts [PhD thesis]. University of Victoria; 1996. |
0 |
0 |
| 1995 |
Weir DJ. Wrap-Around B-Spline Surface Fitting [Master's thesis]. University of Victoria; 1995. |
1 |
0 |
| 1995 |
Milroy MJ. Automation of Laser-Scanner-Based Reverse Engineering [PhD thesis]. University of Victoria; 1995. |
1 |
0 |
| 1994 |
Wild PM. Development, Optimization and Implementation of the Design for a Centrifugal Reverse-Osmosis Desalination System [PhD thesis]. University of Victoria; 1994. |
3 |
0 |
| 1993 |
Lawson SJ. Design of a Novel, Low Cost, Non-Contact Range Finder [Master's thesis]. University of Victoria; 1993. |
0 |
0 |
| 1992 |
Bradley C. Numerically Controlled Machining from Three Dimensional Machine Vision Data [PhD thesis]. University of Victoria; 1992. |
3 |
0 |
| 1987 |
Wang HP. Defining and Fairing Curves and Surfaces Using an Iterative B-Spline Error Technique [Master's thesis]. University of Victoria; 1987. |
1 |
0 |