A three-dimensional inverse finite element analysis of the heel pad

Chokhandre, Snehal; Halloran, Jason P.; van den Bogert, Antonie J.; Erdemir, Ahmet

Affiliations

¹Department of Biomedical Engineering, Cleveland Clinic, Cleveland, OH 44195

²Computational Biomodeling (CoBi) Core, Lerner Research Institute, Cleveland Clinic, Cleveland, OH 44195

³Orchard Kinetics LLC, Cleveland, OH 44106

Abstract

Quantification of plantar tissue behavior of the heel pad is essential in developing computational models for predictive analysis of preventive treatment options such as footwear for patients with diabetes. Simulation based studies in the past have generally adopted heel pad properties from the literature, in return using heel-specific geometry with material properties of a different heel. In exceptional cases, patient-specific material characterization was performed with simplified two-dimensional models, without further evaluation of a heel-specific response under different loading conditions. The aim of this study was to conduct an inverse finite element analysis of the heel in order to calculate heel-specific material properties in situ. Multidimensional experimental data available from a previous cadaver study by Erdemir et al. (“An Elaborate Data Set Characterizing the Mechanical Response of the Foot,” ASME J. Biomech. Eng., 131(9), pp. 094502) was used for model development, optimization, and evaluation of material properties. A specimen-specific three-dimensional finite element representation was developed. Heel pad material properties were determined using inverse finite element analysis by fitting the model behavior to the experimental data. Compression dominant loading, applied using a spherical indenter, was used for optimization of the material properties. The optimized material properties were evaluated through simulations representative of a combined loading scenario (compression and anterior-posterior shear) with a spherical indenter and also of a compression dominant loading applied using an elevated platform. Optimized heel pad material coefficients were 0.001084 MPa (µ), 9.780 () (with an effective Poisson's ratio () of 0.475), for a first-order nearly incompressible Ogden material model. The model predicted structural response of the heel pad was in good agreement for both the optimization (<1.05% maximum tool force, 0.9% maximum tool displacement) and validation cases (6.5% maximum tool force, 15% maximum tool displacement). The inverse analysis successfully predicted the material properties for the given specimen-specific heel pad using the experimental data for the specimen. The modeling framework and results can be used for accurate predictions of the three-dimensional interaction of the heel pad with its surroundings

Links

DOI: dx.doi.org/10.1115/1.4005692

PubMed: 22482682

WoS: 000302583200002

History

Received: 2011-10-14

Revised: 2012-01-03

Online: 2012-02-21

Published: 2012-03-16

Cited Works (17)

Year	Entry
2009	Tao K, Wang D, Wang C, Wang X, Liu A, Nester CJ, Howard D. An in vivo experimental validation of a computational model of human foot. J Bionic Eng. 2009;6(4):387-397.
2010	Pai S, Ledoux WR. The compressive mechanical properties of diabetic and non-diabetic plantar soft tissue. J Biomech. June 18, 2010;43(9):1754-1760.
2006	Goske S, Erdemir A, Petre M, Budhabhatti S, Cavanagh PR. Reduction of plantar heel pressures: insole design using finite element analysis. J Biomech. 2006;39(13):2363-2370.
1999	Cavanagh P. Plantar soft tissue thickness during ground contact in walking. J Biomech. June 1999;32(6):623-628.
2005	Cheung JT-M, Zhang M. A 3-dimensional finite element model of the human foot and ankle for insole design. Arch Phys Med Rehabil. 2005;86(2):353-358.
2006	Erdemir A, Viveiros ML, Ulbrecht JS, Cavanagh PR. An inverse finite-element model of heel-pad indentation. J Biomech. 2006;39(7):1279-1286.
2009	Cho J-R, Park S-B, Ryu S-H, Kim S-H, Lee S-B. Landing impact analysis of sports shoes using 3-D coupled foot-shoe finite element model. J Mech Sci Tech. October 2009;23(10):2583-2591.
2003	Tong J, Lim CS, Goh OL. Technique to study the biomechanical properties of the human calcaneal heel pad. Foot. June 2003;13(2):83-91.
1994	De Clercq D, Aerts P, Kunnen M. The mechanical characteristics of the human heel pad during foot strike in running: an in vivo cineradiographic study. J Biomech. October 1994;27(10):1213-1222.
2010	Gu Y, Li J, Ren X, Lake MJ, Zeng Y. Heel skin stiffness effect on the hind foot biomechanics during heel strike. Skin Res Tech. 2010;16(3):291-296.
2000	Hsu T-C, Wang C-L, Shau Y-W, Tang F-T, Li K-L, Chen C-Y. Altered heel-pad mechanical properties in patients with Type 2 diabetes mellitus. Diabetic Med. December 2000;17(12):854-859.
2009	Erdemir A, Sirimamilla PA, Halloran JP, van den Bogert AJ. An elaborate data set characterizing the mechanical response of the foot. J Biomech Eng. 2009;131(9):094502.
2001	Gefen A, Megido-Ravid M, Itzchak Y. In vivo biomechanical behavior of the human heel pad during the stance phase of gait. J Biomech. 2001;34(12):1661-1665.
2007	Ledoux WR, Blevins JJ. The compressive material properties of the plantar soft tissue. J Biomech. 2007;40(13):2975-2981.
2011	Luo G, Houston VL, Garbarini MA, Beattie AC, Thongpop C. Finite element analysis of heel pad with insoles. J Biomech. May 17, 2011;44(8):1559-1565.
2011	Sopher R, Nixon J, McGinnis E, Gefen A. The influence of foot posture, support stiffness, heel pad loading and tissue mechanical properties on biomechanical factors associated with a risk of heel ulceration. J Mech Behav Biomed Mater. May 2011;4(4):572-582.
2002	Miller-Young JE, Duncan NA, Baroud G. Material properties of the human calcaneal fat pad in compression: experiment and theory. J Biomech. December 2002;35(12):1523-1531.

Cited By (1)

Year	Entry
2016	Morales-Orcajo E, Bayod J, Barbosa de Las Casas E. Computational foot modeling: scope and applications. Arch Comput Methods Eng. September 2016;23(3):389-416.