Commercial viability of Wave Energy Converters (WEC) depends on addressing not only the energetic effciency, but also in solving the practical issues related to manufacturing methods, access to technology, handling, transportation and installation, operation and maintenance, impact on marine life and most importantly the cost per kW-h. The UFCAP WEC is one concept which has the potential to facilitate handling, manufacturing, and installation activities as well as to be able to lower the current wave energy cost per kW-h, however its feasibility had not been properly assessed nor proved. It consists of multiple interconnected Oscillating Water Columns (OWC) chambers, it is modular, and simple, with no-moving parts in contact with the water and can use a simpler one-direction turbine which is more economic, and more effcient than self-rectifying turbines used in most of the OWCs devices. Testing of the device to fully assess its feasibility required a low pressure check-valve, and a customized turbine which were developed during the present work. Check-valves are widely used in the industry for medium or high-pressures, but were not available at all for large-flows with low-pressure-differences. A novel check-valve was devised for this application, along with the scaled UFCAP prototypes developed to be tested in a wave-flume and in the ocean to validate UFCAPs concept feasibility, and identify critical design parameters and features such as the conduit/air-chamber ratio. Ocean tests allowed to observe performance at component and assembly levels, learning new failure-modes and stablishing best-practices for future deployments. Testing confirmed the UFCAP WEC is not only an idea, but a concept which works and can generateing electricity at a competitive cost.