2024 |
Xu B. An Integrated Fault-Tolerant Model Predictive Control Framework for UAV Systems [PhD thesis]. University of Victoria; 2024. |
0 |
0 |
2024 |
Wilson J. Modelling, Experimental Validation and Evaluation of a Parallel Hybrid-Electric Propulsion System for Small-Scale UAVs [Master's thesis]. University of Victoria; 2024. |
0 |
0 |
2023 |
Bras M. Aeroelastic Modeling of Novel and Flexible Aircraft Configurations: Experimental and Numerical Studies [PhD thesis]. University of Victoria; 2023. |
0 |
0 |
2022 |
Sohst M. On the Study of Surrogate-Based Optimization Methods in Aircraft Conceptual Design [PhD thesis]. University of Victoria; 2022. |
0 |
0 |
2022 |
Heinemann S. A Smart Autoflight Control System Infrastructure [PhD thesis]. University of Victoria; 2022. |
0 |
0 |
2022 |
Buzas LI. Design of a Deployable Tape Spring Half Wavelength Dipole Antenna for the ORCASat Nanosatellite [Master's thesis]. University of Victoria; 2022. |
0 |
0 |
2021 |
Sease J. Autonomous Air Vehicle Flight Formation Coordination Using Onboard Real-Time Control [Master's thesis]. University of Victoria; 2021. |
0 |
0 |
2020 |
Warwick SDW. Measurement of Aeroelastic Wing Deflections on a Remotely Piloted Aircraft Using Modal Strain Shapes [Master's thesis]. University of Victoria; 2020. |
0 |
0 |
2020 |
Papera Valente K. The Applications of Microfluidic Platforms for Cancer Research: The Tumor Microenvironment and Drug Delivery Systems [PhD thesis]. University of Victoria; 2020. |
0 |
0 |
2020 |
Habibian A. Multi-Material Topology Optimization of Structures With Discontinuities Using Peridynamics [Master's thesis]. University of Victoria; 2020. |
0 |
0 |
2019 |
Matlock JMT. Evaluation of Hybrid-Electric Propulsion Systems for Unmanned Aerial Vehicles [Master's thesis]. University of Victoria; 2019. |
2 |
0 |
2018 |
Hansen CRD. Magnetic Signature Characterization of a Fixed-Wing Vertical Take-Off and Landing (VTOL) Unmanned Aerial Vehicle (UAV) [Master's thesis]. University of Victoria; 2018. |
0 |
0 |
2017 |
Rodriguez-Macedo JC. Design and Experimental Evaluation of a Unidirectional Flow Collective Air Pumps Wave Energy Converter [PhD thesis]. University of Victoria; 2017. |
0 |
0 |
2017 |
Abdelhamid A. A Non-Gradient Heuristic Topology Optimization Approach Using Bond-Based Peridynamic Theory [Master's thesis]. University of Victoria; 2017. |
0 |
0 |
2016 |
Mustafa G. High Fidelity Micromechanics-Based Statistical Analysis of Composite Material Properties [PhD thesis]. University of Victoria; 2016. |
0 |
0 |
2016 |
Hussmann CA. Reliable Design of Micro-Satellite Systems Using Combined Physics of Failure Reliability Estimation Models [Master's thesis]. University of Victoria; 2016. |
0 |
0 |
2014 |
Ulutas B. Distributed H∞ Control of Segmented Telescope Mirrors [PhD thesis]. University of Victoria; 2014. |
0 |
0 |
2014 |
Richards J. An Experimental Investigation of a Joined Wing Aircraft Configuration Using Flexible, Reduced Scale Flight Test Vehicles [PhD thesis]. University of Victoria; 2014. |
2 |
0 |
2014 |
Curran JT. Design and Optimization of the ECOSat Satellite Requirements and Integration: A Trade Study Analysis of Vibrational, Thermal, and Integration Constraints [Master's thesis]. University of Victoria; 2014. |
1 |
0 |
2012 |
Keulen CJ. Process and Structural Health Monitoring of Composite Structures With Embedded Fiber Optic Sensors and Piezoelectric Transducers [PhD thesis]. University of Victoria; 2012. |
0 |
0 |
2012 |
Karakoc K. Modeling and Design Optimization of Electromechanical Brake Actuator Using Eddy Currents [PhD thesis]. University of Victoria; 2012. |
0 |
0 |
2011 |
Moghaddaszade Kermani A. Fluid-Structure Interaction Studies on the Cardiovascular Hemodynamics of a Mitral Valve [PhD thesis]. University of Victoria; 2011. |
0 |
0 |
2011 |
Carvalho ARD. Design and Development of an Anthropomorphic Hand Prosthesis [PhD thesis]. University of Victoria; 2011. |
0 |
0 |
2010 |
Torres da Rocha JL. Coupled Structural-Acoustic Analytical Models for the Prediction of Turbulent Boundary-Layer-Induced Noise in Aircraft Cabins [PhD thesis]. University of Victoria; 2010. |
0 |
0 |
2010 |
Rocha BFFG. Structural Health Monitoring of Aircraft Structures: Development of a Phased Array System. [Master's thesis]. University of Victoria; 2010. |
1 |
0 |
2010 |
Pereira da Silva CMB. Lamb Wave Based Structural Health Monitoring of Aircraft Structures [PhD thesis]. University of Victoria; 2010. |
1 |
0 |
2010 |
Paiva RM. A Robust and Reliability-Based Optimization Framework for Conceptual Aircraft Wing Design [PhD thesis]. University of Victoria; 2010. |
0 |
0 |
2007 |
Secanell Gallart M. Computational Modeling and Optimization of Proton Exchange Membrane Fuel Cells [PhD thesis]. University of Victoria; 2007. |
1 |
0 |
2007 |
Pereira da Silva CMB. Design and Testing of an Active Aircraft Wing Spar With Bending-Torsion Coupling [Master's thesis]. University of Victoria; 2007. |
0 |
0 |
2007 |
Paiva RM. Development of a Modular MDO Framework for Preliminary Wing Design [Master's thesis]. University of Victoria; 2007. |
1 |
0 |
2007 |
Keulen CJ. Design and Manufacturing of Composite Structures Using the Resin Transfer Molding Technique [Master's thesis]. University of Victoria; 2007. |
0 |
0 |
2007 |
Karakoc K. Design of a Magnetorheological Brake System Based on Magnetic Circuit Optimization [Master's thesis]. University of Toronto; 2007. |
1 |
0 |
2007 |
Carvalho ARD. Multibody Dynamics Modelling and Analysis of the Human Hand [Master's thesis]. University of Victoria; 2007. |
1 |
0 |
2006 |
Rodríguez Macedo JC. Unidirectional Flow Collective Air Pumps: A Novel Wave Energy Converter [Master's thesis]. University of Victoria; 2006. |
1 |
0 |
2006 |
Ng ETY. Elastoplastic Modelling of Multi-Phase Fiber-Reinforced Composites With Void Growth Using Transformation Field Analysis and the Governing Parameter Method [PhD thesis]. University of Victoria; 2006. |
0 |
0 |
2006 |
Nicoll RS. Dynamic Simulation of Marine Risers With Vortex Induced Vibration [Master's thesis]. University of Victoria; 2006. |
0 |
0 |
2005 |
Torres da Rocha JL. An Experimental Study and Flight Testing of Active Aeroelastic Aircraft Wing Structures [Master's thesis]. University of Victoria; 2005. |
1 |
0 |
2005 |
Tezcan S. Development of a Fuel Cell Hybrid Low-Speed Electric Vehicle Testing Facility [Master's thesis]. University of Victoria; 2005. |
0 |
0 |
2005 |
Pedro GPSG. A General Computational Framework for Fluid-Structure Interactions With Application to Underwater Propulsion [PhD thesis]. University of Victoria; 2005. |
1 |
0 |
2005 |
Ferguson SH. Electromechanical Properties of Lead Magnesium Niobate-Lead Titanate and Lead Zirconium Titanate Ceramic Actuators [PhD thesis]. University of Victoria; December 5, 2005. |
0 |
0 |
2005 |
Torres Cruz DJ. Design of an Innovative Car Braking System Using Eddy Currents [Master's thesis]. University of Victoria; 2005. |
0 |
0 |
2005 |
Bumpus SRJ. Experimental Setup and Testing of Fiber Reinforced Composite Structures [Master's thesis]. University of Victoria; 2005. |
1 |
0 |
2004 |
Secanell Gallart M. Development of a Design Tool for Aerodynamic Shape Optimization of Airfoils [Master's thesis]. University of Victoria; 2004. |
0 |
0 |
2004 |
Falcão da Luz L. Design of a Magnetorheological Brake System [Master's thesis]. University of Victoria; 2004. |
1 |
0 |
2003 |
Stockdill BT. Turbulence Modelling of Unsteady Separated Flow Over an Airfoil [Master's thesis]. University of Victoria; 2003. |
1 |
0 |
2003 |
Ng ETY. A Study on the Effective Linear Thermoelastic Properties of Hybrid Composites [Master's thesis]. University of Victoria; 2003. |
1 |
0 |
2001 |
Burns SG. Design and Modeling of an Electrostrictive Inchworm Actuator [Master's thesis]. University of Victoria; 2001. |
1 |
0 |
2000 |
Sedaghati R. Investigations in Structural Optimization of Nonlinear Problems Using the Finite Element Method [PhD thesis]. University of Victoria; 2000. |
0 |
0 |
2019 |
Botelho Ferreira HM. Probabilistic Roadmaps for Aircraft 4D Path Planning [Master's thesis]. University of Lisbon; April 2019. |
1 |
0 |
2018 |
da Costa Rosa MD. UAV 4D Path Planning Using Rapidly-Exploring Random Trees [Master's thesis]. University of Lisbon; November 2018. |
1 |
0 |