Stability Control of Electric Vehicles With in-Wheel Motors

Links

Abstract

Recently, mostly due to global warming concerns and high oil prices, electric vehicles have attracted a great deal of interest as an elegant solution to environmental and energy problems. In addition to the fact that electric vehicles have no tailpipe emissions and are more efficient than internal combustion engine vehicles, they represent more versatile platforms on which to apply advanced motion control techniques, since motor torque and speed can be generated and controlled quickly and precisely.

The chassis control systems developed today are distinguished by the way the individual subsystems work in order to provide vehicle stability and control. However, the optimum driving dynamics can only be achieved when the tire forces on all wheels and in all three directions can be influenced and controlled precisely. This level of control requires that the vehicle is equipped with various chassis control systems that are integrated and networked together. Drive-by-wire electric vehicles with in-wheel motors provide the ideal platform for developing the required control system in such a situation.

The focus of this thesis is to develop effective control strategies to improve driving dynamics and safety based on the philosophy of individually monitoring and controlling the tire forces on each wheel. A two-passenger electric all-wheel-drive urban vehicle (AUTO21EV) with four direct-drive in-wheel motors and an active steering system is designed and developed in this work. Based on this platform, an advanced fuzzy slip control system, a genetic fuzzy yaw moment controller, an advanced torque vectoring controller, and a genetic fuzzy active steering controller are developed, and the performance and effectiveness of each is evaluated using some standard test maneuvers. Finally, these control systems are integrated with each other by taking advantage of the strengths of each chassis control system and by distributing the required control effort between the in-wheel motors and the active steering system. The performance and effectiveness of the integrated control approach is evaluated and compared to the individual stability control systems, again based on some predefined standard test maneuvers.

Cited Works (6)

Year	Entry
2003	Aga M, Okada A. Analysis of vehicle stability control (VSC)'s effectiveness from accident data. In: Proceedings of the 18th International Technical Conference on the Enhanced Safety of Vehicles (ESV). May 19-22, 2003; Nagoya, Japan.
2004	Farmer CM. Effect of electronic stability control on automobile crash risk. Traffic Inj Prev. 2004;5(4):317-325.
2005	Liebemann EK, Meder K, Schuh J, Nenninger G. Safety and performance enhancement: the Bosch electronic stability control (ESP). In: Proceedings of the 19th International Technical Conference on the Enhanced Safety of Vehicles (ESV). June 6-9, 2005; Washington, DC.
2005	Lie A, Tingvall C, Krafft M, Kullgren A. The effectiveness of ESC (electronic stability control) in reducing real life crashes and injuries. In: Proceedings of the 19th International Technical Conference on the Enhanced Safety of Vehicles (ESV). June 6-9, 2005; Washington, DC.
2005	Rieger G, Scheef J, Becker H, Stanzel M, Zobel R. Active safety systems change accident environment of vehicles significantly: a challenge for vehicle design. In: Proceedings of the 19th International Technical Conference on the Enhanced Safety of Vehicles (ESV). June 6-9, 2005; Washington, DC.
2004	Dang JN. Preliminary Results Analyzing the Effectiveness of Electronic Stability Control (ESC) Systems. Washington, DC: National Highway Traffic Safety Administration; September 2004. NHTSA Evaluation Note DOT HS 809 790.

Cited By (1)

Year	Entry
2011	Uchida TK. Real-Time Dynamic Simulation of Constrained Multibody Systems Using Symbolic Computation [PhD thesis]. University of Waterloo; 2011.