| 2018 |
Sahoo B. Direct Visual-Inertial Odometry Using Epipolar Constraints for Land Vehicles [Master's thesis]. University of Waterloo; 2018. |
0 |
0 |
| 2023 |
Ploeger S. Investigation of Stochastic Deep Learning Motion Planning Methods for Autonomous Robots [Master's thesis]. University of Guelph; April 2023. |
0 |
0 |
| 2022 |
Zhu CW. AROS: The Autonomous Robot for Orchard Surverying [Master's thesis]. University of Guelph; May 2022. |
0 |
0 |
| 2022 |
Yeprem U. A Machine Learning-Based Approach to Corporate Social Performance Assessment [Master's thesis]. University of Guelph; September 2022. |
0 |
0 |
| 2022 |
Lee J. The Detection of Fruit Flower Clusters in Apple Orchards Using Machine Learning [Master's thesis]. University of Guelph; January 2022. |
0 |
0 |
| 2021 |
Hill ED. Model Predictive Control Strategies for Fault Tolerance [PhD thesis]. University of Guelph; August 2021. |
0 |
0 |
| 2021 |
Dyer B. ARES: The Autonomous Robotic Environmental Sensor [Master's thesis]. University of Guelph; April 2021. |
0 |
0 |
| 2019 |
Byerlay RAE. A Direct Georeferencing Imaging Technique to Identify Earth Surface Temperatures Using Oblique Angle Airborne Measurements [Master's thesis]. University of Guelph; December 2019. |
0 |
0 |
| 2018 |
Lashkari N. Real-Time Motion Planning and Controls of Docked Mobile Robots [PhD thesis]. University of Guelph; May 2018. |
0 |
0 |
| 2017 |
Shahriari M. Development of Collision-Free Navigation Methodologies for Multiple Mobile Robots [PhD thesis]. University of Guelph; May 2017. |
1 |
0 |
| 2017 |
Islam MS. Magnetic and Porous Media Thermoacoustic Systems: Modeling and Experimentation [PhD thesis]. University of Guelph; January 2017. |
0 |
0 |
| 2014 |
Cloutier J. Simulation and Control of a Ball Screw System Actuated by a Stepper Motor With Feedback [Master's thesis]. University of Guelph; December 2014. |
0 |
0 |
| 2013 |
Lambert T. A Novel Approach to the Design of an in-Wheel Semi-Anhysteretic Axial-Flux Switched-Reluctance Motor Drive System for Electric Vehicles [Master's thesis]. University of Victoria; May 2013. |
0 |
0 |