| 2021 |
Massoom ZSF. Modeling and Experimental Investigations of Drilling Carbon Fiber Reinforced Composites [PhD thesis]. University of Ontario Institute of Technology; April 2021. |
0 |
0 |
| 2021 |
Imad M. Effect of Cutting Tool Microgeometry When Milling Hardened Steels, a Finite Element Simulation and Surface Integrity Analysis [Master's thesis]. University of Ontario Institute of Technology; January 2021. |
0 |
0 |
| 2021 |
Ahmed WAA. Modeling and Analysis of Metal Cutting Process Using Self-Propelled Rotary Tools [PhD thesis]. University of Ontario Institute of Technology; February 2021. |
0 |
0 |
| 2018 |
Hegab H. Towards Sustainable Machining of Difficult-to-Cut Materials Using Nano-Cutting Fluids [PhD thesis]. University of Ontario Institute of Technology; May 2018. |
0 |
0 |
| 2015 |
Ghandehariun A. Mechanics of Machining Metal Matrix Composites: Analytical Modeling and Finite Element Simulation [PhD thesis]. University of Ontario Institute of Technology; January 2015. |
0 |
0 |
| 2014 |
Ragheb H. Torque Control Strategy for Off-Road Vehicle Mobility [PhD thesis]. University of Ontario Institute of Technology; November 2014. |
0 |
0 |
| 2013 |
Hosseini SA. Model Based Simulation of Broaching Operation: Cutting Mechanics, Surface Integrity, and Process Optimization [PhD thesis]. University of Ontario Institute of Technology; April 2013. |
1 |
0 |
| 2013 |
Ciloglu H. Experimental and Numerical Investigation of the Dynamic Seat Comfort in Aircrafts [Master's thesis]. University of Ontario Institute of Technology; 2013. |
0 |
0 |
| 2012 |
Pang L. Analytical Modeling and Simulation of Metal Cutting Forces for Engineering Alloys [PhD thesis]. University of Ontario Institute of Technology; April 2012. |
0 |
0 |
| 2011 |
Parker G. Self-Propelled Rotary Tool for Turning Difficult-to-Cut Materials [Master's thesis]. University of Ontario Institute of Technology; April 2011. |
0 |
0 |
| 2019 |
Eltaggaz AAA. Investigation of Sustainable Machining Strategies for Difficult-to-Cut Materials [PhD thesis]. University of Guelph; August 2019. |
0 |
0 |
| 2015 |
Aramesh M. Machinability of Titanium Metal Matrix Composites (Ti-MMCs) [PhD thesis]. École polytechnique de Montréal; June 2015. |
1 |
0 |
| 2012 |
Bejjani R. Machinability and Modeling of Cutting Mechanism for Titanium Metal Matrix Composites [PhD thesis]. École polytechnique de Montréal; December 2012. |
2 |
0 |