Constitutive and Fracture Characterization of an Anisotropic and Asymmetric Alloy Sheet

Links

Abstract

Magnesium alloys can offer significant weight reduction over conventional steel or aluminum alloys. Specifically, rare-earth alloyed magnesium sheets have the potential to be used as lightweight structural alloys since they possess a weakened crystallographic texture that leads to superior ductility over conventional magnesium alloys. However, there are some complications that limit wide-spread adoption of these alloys that are mainly attributed to their significant anisotropy and complex yielding behaviour, as well as their limited ductility (relative to cubic materials) and their orientation-dependent fracture response. The present thesis aims to address some of these challenges to support the commercial implementation of these alloys.

Examining ZEK100-O rare-earth magnesium rolled sheet as a model material, the constitutive plastic and fracture behaviour of the alloy were characterized to reveal the response of the material under different quasi-static loading conditions at room temperature. Given the complex yielding behaviour of the material, a continuum-based plasticity model has been developed that captures evolving anisotropy and tension-compression asymmetry of ZEK100-O. The modelling framework consists of the CPB06 yield criterion for hcp materials along with a non-associative flow rule in which the yield function and plastic potential were calibrated for a range of plastic deformation levels along with an interpolation approach to account for evolving anisotropy under proportional loading conditions. The constitutive model has been implemented as a user material subroutine (UMAT) into the commercial finite element code, LS-DYNA, for general 3-D stress states. It is shown that predictions of the model were in good agreement with experimental data in terms of both global load-displacement as well as and local strain responses.

In addition to a remarkable anisotropy and symmetry in the plastic response of the material, fracture experiments in different test orientations revealed that the fracture behaviour of the material is also anisotropic. However, orientation-dependency in fracture is not as significant as anisotropy in plastic response. In order to visualize directional dependency of the fracture response of the magnesium alloy, experimental fracture loci for different orientations were constructed. Furthermore, non-proportional tests were performed incorporating abrupt changes in stress state to study the role of the loading history on fracture behaviour of the alloy. It is shown that simple damage indicators might not be able to capture accurately fracture response of the material under severe changes in the stress states.

Cited Works (12)

Year	Entry
2016	ten Kortenaar L. Failure Characterization of Hot Formed Boron Steels With Tailored Mechanical Properties [Master's thesis]. University of Waterloo; 2016.
2017	Noder J. Characterization and Simulation of Warm Forming of 6xxx and 7xxx Series Aluminum Alloys [Master's thesis]. University of Waterloo; 2017.
1948	Hill R. A theory of the yielding and plastic flow of anisotropic metals. Proc R Soc Lon Ser-A. May 27, 1948;193(1033):281-297.
1985	Lemaitre J. A continuous damage mechanics model for ductile fracture. J Eng Mater Technol. January 1985;107(1):83-89.
1984	Tvergaard V, Needleman A. Analysis of the cup-cone fracture in a round tensile bar. Acta Metall. 1984;32(1):157-169.
1977	Gurson AL. Continuum theory of ductile rupture by void nucleation and growth, I: yield criteria and flow rules for porous ductile media. J Eng Mater Technol. 1977;99(1):2-15.
1969	Rice JR, Tracey DM. On the ductile enlargement of voids in triaxial stress fields. J Mech Phys Solids. 1969;17(3):201-217.
2000	Pardoen T, Hutchinson JW. An extended model for void growth and coalescence. J Mech Phys Solids. December 2000;48(12):2467-2512.
1968	McClintock FA. A criterion for ductile fracture by the growth of holes. J Appl Mech. June 1968;35(2):363-371.
2003	Barlat F, Brem JC, Yoon JW, Chung K, Dick RE, Lege DJ, Pourboghrat F, Choi S-H, Chu E. Plane stress yield function for aluminum alloy sheets, I: theory. Int J Plast. September 2003;19(9):1297-1319.
2004	Chen Z. The Role of Heterogeneous Particle Distribution in the Prediction of Ductile Fracture [PhD thesis]. University of Waterloo; 2004.
1980	Chu CC, Needleman A. Void nucleation effects in biaxially stretched sheets. J Eng Mater Technol. 1980;102(3):249-256.

Cited By (1)

Year	Entry
2021	Lee SH. On the Development of Fold Initiator Patterns to Promote Progressive Folding of Hot Stamped Ultra-High Strength Axial Crush Structures [Master's thesis]. University of Waterloo; 2021.