Effectiveness of an on-Body Lifting Aid At Reducing Low-Back Physical Demands During an Automotive Assembly Task: Assessment of EMG Response and User Acceptability

Links

URL: http://hdl.handle.net/1974/1357

PROQUEST: 250819055

Abstract

The purposes of the present work were: 1) to develop a computerized model that could predict the personal lift-assist device (PLAD) spring excursion and control spring stiffness for various individuals based on their anthropometry and working posture and 2) to test the PLAD‟s (Version 6) effectiveness and user acceptability during static forward bending in an automotive assembly plant. Study 1 required 30 subjects to carry out a protocol that simulated unloaded stoop, squat, and freestyle lifting. Trunk inclination and knee angles were determined via 3 Fastrak^TM sensors, whereas a displacement transducer attached in-line with the PLAD determined excursion when the trunk or knees flexed. A model was created to determine spring excursion, and it was successfully validated with 10 additional subjects. A computerized model applying the excursion model and mathematical equations was also developed to calculate the required spring stiffness for offsetting a proportion of the L₄/L₅ bending moment for each individual in various postures. Study 2 investigated the effectiveness and user acceptability of the PLAD at an automotive manufacturing facility, using operators who performed an assembly process requiring forward bending and static holds. Surface EMG data were collected at six sites on the low back and abdomen, and a tri-axial accelerometer was mounted on each subject‟s sternum to measure trunk inclination. A 20% reduction in the L4/L5 bending moment was provided to each wearer using the aforementioned computerized model. The PLAD was able to significantly reduce low back muscular activity, predictedcompression, and ratings of perceived exertion, without significantly changing abdominal activity or trunk inclination. Workers had positive opinions about the device, and 80% said they would wear the device everyday on-line. Additionally, the computerized model developed in Study 1 was effective, as worker low back muscular activity was reduced by approximately 20% when wearing the PLAD. With slight alterations, the PLAD appears to be beneficial in reducing low back forces and discomfort in many tasks that place excessive biomechanical loading on the low back.

Cited Works (16)

Year	Entry
1980	Ratcliffe JF. The arterial anatomy of the adult human lumbar vertebral body: a microarteriographic study. J Anat. August 1980;131(1):57-79.
1981	Adams MA, Hutton WC. The relevance of torsion to the mechanical derangement of the lumbar spine. Spine. May–June 1981;6(3):241-248.
1996	Amling M, Herden S, Pösl M, Hahn M, Ritzel H, Delling G. Heterogeneity of the skeleton: comparison of the trabecular microarchitecture of the spine, the iliac crest, the femur, and the calcaneus. J Bone Miner Res. January 1996;11(1):36-45.
1994	Shirazi-Adl A. Nonlinear stress analysis of the whole lumbar spine in torsion: mechanics of facet articulation. J Biomech. March 1994;27(3):289-299.
1995	Sharma M, Langrana NA, Rodriguez J. Role of ligaments and facets in lumbar spinal stability. Spine. April 15, 1995;20(8):887-900.
1966	Nachemson A. The load on lumbar disks in different positions of the body. Clin Orthop Relat Res. March–March 1966;45:107-122.
2006	Abdoli-Eramaki M. Design and Instrumentation of a Mechanical Personal Lift Augmentation Device (PLAD) for Manual Lifting Tasks [PhD thesis]. Queen's University; January 2006.
1994	Cholewicki J, McGill SM. EMG assisted optimization: a hybrid approach for estimating muscle forces in an indeterminate biomechanical model. J Biomech. October 1994;27(10):1287-1289.
1988	McGill SM, Patt N, Norman RW. Measurement of the trunk musculature of active males using CT scan radiography: implications for force and moment generating capacity about the L4/L5 joint. J Biomech. 1988;21(4):329-341.
1997	McGill SM. The biomechanics of low back injury: implications on current practice in industry and the clinic. J Biomech. May 1997;30(5):465-475.
1986	McGill SM, Norman RW. Partitioning of the L4-L5 dynamic moment into disc, ligamentous, and muscular components during lifting. Spine. September 1986;11(7):666-678.
1980	Hickey DS, Hukins DWL. Relation between the structure of the annulus fibrosus and the function and failure of the intervertebral disc. Spine. March–April 1980;5(2):106-116.
1998	Norman R, Wells R, Neumann P, Frank J, Shannon H, Kerr M; Ontario Universities Back Pain Study (OUBPS) Group. A comparison of peak vs cumulative physical work exposure risk factors for the reporting of low back pain in the automotive industry. Clin Biomech (Bristol, Avon). December 1998;13(8):561-573.
1989	Roberts S, Menage J, Urban JPG. Biochemical and structural properties of the cartilage end-plate and its relation to the intervertebral disc. Spine. February 1989;14(2):166-174.
1981	Schultz AB, Andersson GBJ. Analysis of loads on the lumbar spine. Spine. January–February 1981;6(1):76-82.
1988	Brinckmann P, Biggemann M, Hilweg D. Fatigue fracture of human lumbar vertebrae. Clin Biomech (Bristol, Avon). 1988;3(suppl 1):S1-S23.

Cited By (1)

Year	Entry
2012	Graham RB. Assessing Dynamic Spinal Stability Using Maximum Finite-Time Lyapunov Exponents [PhD thesis]. Queen's University; July 2012.