Quantitative CT for determination of bone mineral density:​ a review

Cann, C. E.

Affiliations

¹

Abstract and keywords

One of the major uses of quantitative computed tomography (CT) has been the measurement of bone mineral density (BMD) at various skeletal sites. The published literature on this subject from 1974 to the present is extensive. Because many investigators and clinicians are just now starting to explore the utility of this technique, the author reviewed this literature to provide both the historic perspective and current status of BMD measurement with CT. The physical and physiologic bases of the method, accuracy, reproducibility, radiation dose, and clinical utility are all discussed.

Keywords:

Links

DOI: 10.1148/radiology.166.2.3275985

PubMed: 3275985

WoS: A1988L722500039

Cited By (31)

Year	Entry
1989	Mosekilde L, Bentzen SM, Ørtoft G, Jørgensen J. The predictive value of quantitative computed tomography for vertebral body compressive strength and ash density. Bone. 1989;10(6):465-470.
2008	Nazarian A, Snyder BD, Zurakowski D, Müller R. Quantitative micro-computed tomography: a non-invasive method to assess equivalent bone mineral density. Bone. August 2008;43(2):302-311.
2020	Rhodes S, Batzdorf A, Sorci O, Peng M, Jankelovits A, Hornyak J, An J, Noël PB, Høilund-Carlsen PF, Alavi A, Rajapakse CS. Assessment of femoral neck bone metabolism using ¹⁸F-sodium fluoride PET/CT imaging. Bone. July 2020;136:115351.
2021	Kottlors J, Große Hokamp N, Fervers P, Bremm J, Fichter F, Persigehl T, Safarov O, Maintz D, Tritt S, Abdullayev N. Early extrapulmonary prognostic features in chest computed tomography in covid-19 pneumonia: bone mineral density is a relevant predictor for the clinical outcome: a multicenter feasibility study. Bone. March 2021;144:115790.
1994	Zysset PK, Sonny M, Hayes WC. Morphology-mechanical property relations in trabecular bone of the osteoarthritic proximal tibia. J Arthoplast. 1994;9(2):203-216.
1998	Keyak JH, Rossi SA, Jones KA, Skinner HB. Prediction of femoral fracture load using automated finite element modeling. J Biomech. February 1998;31(2):125-133.
2007	Yosibash Z, Trabelsi N, Milgrom C. Reliable simulations of the human proximal femur by high-order finite element analysis validated by experimental observations. J Biomech. 2007;40(16):3688-3699.
2008	Harrison NM, McDonnell PF, O’Mahoney DC, Kennedy OD, O’Brien FJ, McHugh PE. Heterogeneous linear elastic trabecular bone modelling using micro-CT attenuation data and experimentally measured heterogeneous tissue properties. J Biomech. August 7, 2008;41(11):2589-2596.
1994	Keyak JH, Lee IY, Skinner HB. Correlations between orthogonal mechanical properties and density of trabecular bone: use of different densitometric measures. J Biomed Mater Res. November 1994;A28(11):1329-1336.
1992	Carter DR, Bouxsein ML, Marcus R. New approaches for interpreting projected bone densitometry data. J Bone Miner Res. February 1992;7(2):137-145.
2004	Riggs BL, Melton LJ III, Robb RA, Camp JJ, Atkinson EJ, Peterson JM, Rouleau PA, McCollough CH, Bouxsein ML, Khosla S. Population-based study of age and sex differences in bone volumetricdensity, size, geometry, and structure at different skeletal sites. J Bone Miner Res. December 2004;19(12):1945-1954.
2006	Riggs BL, Melton LJ III, Robb RA, Camp JJ, Atkinson EJ, Oberg AL, Rouleau PA, McCollough CH, Khosla S, Bouxsein ML. Population-based analysis of the relationship of whole bone strength indices and fall-related loads to age- and sex-specific patterns of hip and wrist fractures. J Bone Miner Res. February 2006;21(2):315-323.
1994	Les CM, Keyak JH, Stover SM, Taylor KT, Kaneps AJ. Estimation of material properties in the equine metacarpus with use of quantitative computed tomography. J Orthop Res. November 1994;12(6):822-833.
2007	Taddei F, Schileo E, Helgason B, Cristofolini L, Viceconti M. The material mapping strategy influences the accuracy of ct-based finite element models of bones: an evaluation against experimental measurements. Med Eng Phys. 2007;29(9):973-979.
2020	Löffler MT, Sollmann N, Mei K, Valentinitsch A, Noël PB, Kirschke JS, Baum T. X-ray-based quantitative osteoporosis imaging at the spine. Osteoporos Int. February 2020;31(2):233-250.
1991	Faulkner KG, Cann CE, Hasegawa BH. Effect of bone distribution on vertebral strength: assessment with patient-specific nonlinear finite element analysis. Radiology. June 1991;179(3):669-674.
1998	Mosekilde L. The effect of modelling and remodelling on human vertebral body architecture. Technol Health Care. December 1998;6(5-6):287-297.
2000	Mosekilde L. Age-related changes in bone mass, structure, and strength: effects of loading. Z Rheumatol. February 2000;59(suppl 1):I1-I9.
2013	Hussein Ali AI. 3-D Visualization and Prediction of Spine Fractures Under Axial Loading [PhD thesis]. Boston University; 2013.
1994	Zysset P. A Constitutive Law for Trabecular Bone [PhD thesis]. Lausanne, Switzerland: École Polytechnique Fédérale de Lausanne; 1994.
2008	Nazarian A. Relative Interaction of Material and Structure in Normal and Pathologic Bone [PhD thesis]. Swiss Federal Institute of Technology Zürich; 2008.
2023	Moshage SG. Non-Invasive Determinants of Juvenile Equine Bone Strength for Assessing Exercise Interventions [PhD thesis]. University of Illinois at Urbana-Champaign; 2023.
2018	Zimmermann Y. Développement d'une modélisation par éléments finis pour caractérisation non destructive de la biomécanique osseuse à partir d'images MICRO-CT [Master's thesis]. École polytechnique de Montréal; December 2018.
2008	Crookshank MCM. Optimizing Fracture Management: Correlating the Physical and Mechanical Properties of Bone to Computed Tomography to Generate an Estimate of Bone Quality [Master's thesis]. Queen's University; January 2008.
1992	Bouxsein ML. Physical Activity and Bone Density [PhD thesis]. Stanford University; August 1992.
2010	Johnston JD. Development of a Non-Invasive Imaging Technique for Characterizing Subchondral Bone Density and Stiffness [PhD thesis]. Vancouver, BC: University of British Columbia; December 2010.
2020	Michalski AS. A Quantitative Computed Tomography Approach Towards Opportunistic Osteoporosis Screening [PhD thesis]. Calgary, AB: University of Calgary; March 2020.
1990	Faulkner KG. Quantitative Computed Tomography and Finite Element Modeling to Predict Vertebral Fractures [PhD thesis]. Berkeley, CA: Berkeley, University of California; June 1990.
1996	Keyak JH. Prediction of Femoral Strength Using Automated Finite Element Modeling [PhD thesis]. Berkeley, CA: Berkeley, University of California; 1996.
1996	Rossi SA. The Prediction of Human Cortical Bone Strength Using the Finite-Element Method: A Study of the Flexural and Torsional Behavior of Femoral Shafts With Simulated Metastatic Lesions [PhD thesis]. San Francisco, University of California; 1996.
2013	Burnett W. Quantitative Computed Tomography Analysis of Patellar Subchondral Bone Density [Master's thesis]. University of Saskatchewan; January 2013.