A procedure for the recording and storing of EMG signals for the automatic extraction of individual motor unit rate coding, and morphological information was developed. The extraction of the fate coding information is performed by the analysis of individual motor unit action potential trains (MUAPT'S), obtained by decomposing the composite EMG signal, recorded from a selective surface of a needle electrode. The morphological information is derived motor unit potentials (MUP'S). from the The macro MUP'S analysis of macro are the result of ensemble averaging the cannula recorded signal, using the individual MUAPT'S as sources of synchronizing triggers for the averaging process. A standard single fibre or macro EMG needle electrode can be used.

Signals recorded during isometric, varying contractions, level, can up constant or slow force to 50% of the maximum voluntary contraction be successfully analyzed. The number of motor units. simultaneously studied, usually ranges from 3 to 5. The processing of the data, for each second of muscle contraction, can be performed. by a PDP 11/34 computer in approximately one minute, with 95% accurate, coding information obtained. This speed and accuracy may increase rate the clinical use of rate coding information. The procedure also provides, individual motor unit rate coding and morphological information simultaneously, allowing correlation of motor unit sizes with firing rates and identification of macro MUP'S for high threshold motor units.