This thesis examines a series of near-field antenna arrays used to perform subwavelength focusing and subwavelength imaging outside the extreme near field. For this purpose, slot and dipole arrays have been designed to produce a subwavelength focal spot at a distance of a quarter wavelength from the array. The dipole arrays are then used as scanning probes to produce images with subwavelength resolution based on perturbations in the scattered field. Unlike negative-refractive-index metamaterial superlenses, the imaging resolution is not affected by losses in the array. Furthermore, the arrays are simple to fabricate and are frequency scalable up to Terahertz frequencies and beyond.

A near-field analogue to classic antenna-array theory called ``shifted beam theory'' is presented as a design tool. Based on the linear independence of element field patterns in the near field, this theory is very intuitive and provides a simplified way to calculate the element current weights necessary to generate a given target near-field pattern.

Two-dimensional near-field subwavelength focusing is demonstrated using a slotted transmission-screen, or ``meta-screen'', under plane-wave incidence. At a distance of a quarter wavelength, the transverse electric field was measured in experiment to have a full-width half-maximum beamwidth of 0.40 by 0.27 wavelengths. This is compared to a single slot transmission-screen which had a beamwidth of 0.60 by 0.58 wavelengths.

Broadside and end-fire dipole arrays are used to perform subwavelength imaging in one and two dimensions, respectively. The experimental minimum resolvable separation between two objects at a quarter-wavelength distance was 0.26 wavelengths using the end-fire array probe, as compared to 0.43 wavelengths for a single monopole probe. For an experiment using eight objects scattered over a one-square-wavelength area, however, the array probe imaging resolution remained around 0.25 wavelengths while the baseline monopole probe was no longer able to resolve any of the objects. Experiments were also conducted using objects buried behind a dielectric barrier as well as objects immersed within a dielectric. These results were consistent with the resolution improvements observed in the free-space resolution experiments.