The load-bearing area in the knee joint

Walker, P. S.<sup>1</sup>; Hajek, J. V.<sup>1</sup>

Affiliations

¹Hospital for Special Surgery, Cornell University Medical College, New York, U.S.A

Abstract

Measurements were made of the location and size of the contact areas in cadaver knee joints, for a load of 150 Kgf applied for 5 sec down the long axis of the tibia. Results were obtained from a total of 4 knees, considering flexion angles from 0 to 120°. The methods used were to measure directly from castings of the joint cavity; and to calculate from measurements of radii of curvature and joint deflection. Average contact areas for lateral and medial condyles were 1.4 and 1.8 cm² respectively. Areas for the medial condyle were greater than for the lateral condyle and also the areas diminished as flexion angle increased. The implications of the results to contact stresses, joint lubrication and ‘condylar replacement’ knee prosthesis design were discussed.

Links

DOI: 10.1016/0021-9290(72)90030-9

PubMed: 4665894

WoS: A1972N941700004

History

Received: 1972-01-24

Cited Works (1)

Year	Entry
1967	Paul JP. Forces transmitted by joints in the human body. Proc Inst Mech Eng. 1967;181(pt 3J):8-15.

Cited By (42)

Year	Entry
1994	Yang J-K, Kajzer J. Mathematical model of pedestrian lower extremity. In: Proceedings of the 14th International Technical Conference on the Enhanced Safety of Vehicles (ESV). May 23-26, 1994; Munich, Germany.220-232.
1999	Banglmaier RF, Dvoracek-Driksna D, Oniang'o TE, Haut RC. Axial compressive load response of the 90° flexed human tibiofemoral joint. In: Proceedings of the 43rd Stapp Car Crash Conference. October 25-27, 1999; San Diego, CA. Warrendale, PA: Society of Automotive Engineers:127-139. SAE 99SC08.
2003	Van Hoof J, De Lange R, Wismans JSHM. Improving pedestrian safety using numerical human models. Stapp Car Crash J. 2003;47:401-436. SAE 2003-22-0018.
1980	Fukubayashi T, Kurosawa H. The contact area and pressure distribution pattern of the knee: a study of normal and osteoarthrotic knee joints. Acta Orthop Scand. December 1980;51(5):871-879.
2011	Makris EA, Hadidi P, Athanasiou KA. The knee meniscus: structure–function, pathophysiology, current repair techniques, and prospects for regeneration. Biomaterials. October 2011;32(30):7411-7431.
1975	Walker PS, Erkman MJ. The role of the menisci in force transmission across the knee. Clin Orthop Relat Res. June 1975;109:184-192.
1980	Kurosawa H, Fukubayashi T, Nakajima H. Load-bearing mode of the knee joint: physical behavior of the knee joint with or without menisci. Clin Orthop Relat Res. June 1980;149:283-290.
1974	Behrens JC, Walker PS, Shoji H. Variations in strength and structure of cancellous bone at the knee. J Biomech. 1974;7(3):201-207.
1976	Torzilli PA, Mow VC. On the fundamental fluid transport mechanisms through normal and pathological articular cartilage during function, I: the formulation. J Biomech. 1976;9(8):541-552.
1980	Wismans J, Veldpaus F, Janssen J, Huson A, Struben P. A three-dimensional mathematical model of the knee-joint. J Biomech. 1980;13(8):677-685.
1983	Goldstein SA, Wilson DL, Sonstegard DA, Matthews LS. The mechanical properties of human tibial trabecular bone as a function of metaphyseal location. J Biomech. 1983;16(12):965-969.
1985	Huiskes R, Kremers J, de Lange A, Woltring HJ, Selvik G, van Rens TJG. Analytical stereophotogrammetric determination of three-dimensional knee-joint geometry. J Biomech. 1985;18(8):559-570.
1991	Blankevoort L, Kuiper JH, Huiskes R, Grootenboer HJ. Articular contact in a three-dimensional model of the knee. J Biomech. 1991;24(11):1019-1031.
2009	Ateshian GA. The role of interstitial fluid pressurization in articular cartilage lubrication. J Biomech. June 19, 2009;42(9):1163-1176.
1991	Blankevoort L, Huiskes R. Ligament-bone interaction in a three-dimensional model of the knee. J Biomech Eng. August 1991;113(3):263-269.
1993	Mow VC, Ateshian GA, Spilker RL. Biomechanics of diarthrodial joints: a review of twenty years of progress. J Biomech Eng. November 1993;115(4B):460-467.
1984	Brown TD, Shaw DT. In vitro contact stress distribution on the femoral condyles. J Orthop Res. 1984;2(2):190-199.
1997	Kwak SKD. Experimental and Mathematical Investigation of the Human Knee: Anatomy, Kinematics and Contact [PhD thesis]. Columbia University; 1997.
2001	Huang C-Y. Biomechanics of Soft Tissues in the Shoulder Joint: Glenohumeral Cartilage, Ligament, and Rotator Cuff Tendon [PhD thesis]. Columbia University; 2001.
2015	Oungoulian SR. Friction and Wear Measurements of Bovine Articular Cartilage Against Non-Native Materials [PhD thesis]. Columbia University; 2015.
2016	Squyres NS. Shape Variation in the Distal Femur of Modern Humans and Fossil Hominins [PhD thesis]. Johns Hopkins University; August 2016.
2013	Vijayakumar V. Quantifying the Regional Variations in the Mechanical Properties of Cancellous Bone of the Tibia Using Indentation Testing and CT Imaging [Master's thesis]. Hamilton, ON: McMaster University; September 2013.
2008	Shirazi Aghjari R. Computational Biomechanics of the Human Knee Joint: Role of Collagen Fibrils Networks [PhD thesis]. École polytechnique de Montréal; December 2008.
2012	Marouane H. Effet de la force de compression sur la réponse passive de l'articulation du genou: Une étude numérique non-linéaire [Master's thesis]. École polytechnique de Montréal; November 2012.
2017	Marouane H. Biomécanique de l'articulation du genou humain durant la marche: Un modèle musculosquelettique hybride [PhD thesis]. École polytechnique de Montréal; March 2017.
1999	Zdero R. A New Diagnostic Ultrasound Technique for Studying TKR Contact Mechanics [PhD thesis]. Queen's University; May 1999.
2012	Sanchez-Adams J. Regional Characterization of the Knee Meniscus and Tissue Engineering With Dermal Stem Cells [PhD thesis]. Houston, TX: Rice University; 2012.
2006	Whitty M. Development of a Physiological Three Dimensional Finite Element Model of a Human Tibia [Master's thesis]. Kingston, ON: Royal Military College of Canada; May 2006.
1980	Wismans JSHM. A Three-Dimensional Mathematical Model of the Human Knee Joint [PhD thesis]. Eindhoven, The Netherlands: Technische Universiteit Eindhoven; 1980.
1989	Read L. A Two-Dimensional Knee Joint Model Applied to Landing Movements in Alpine Skiing [Master's thesis]. Calgary, AB: University of Calgary; December 1989.
1997	Boyd SK. A 3D in-Situ Model for Patellofemoral Joint Contact Analysis in the Normal and Anterior Cruciate Ligament Deficient Knee [Master's thesis]. Calgary, AB: University of Calgary; April 1997.
1999	Powers MJ. Human Patellofemoral Kinematics and Related Joint Surface Geometry [Master's thesis]. Calgary, AB: University of Calgary; September 1999.
2001	Moss RT. Quantification of Patellofemoral Contact Area Using MR Imaging, a Validation and Comparative Study [Master's thesis]. Calgary, AB: University of Calgary; September 2001.
2003	Han S-K. Articular Cartilage Modeling in the 3-D Patellofemoral Joint Contact [Master's thesis]. Calgary, AB: University of Calgary; June 2003.
2004	Clark AL. Heterogeneous Patellofemoral Articular Cartilage Mechanical and Biological Response to Compression and Anterior Cruciate Ligament Transection [PhD thesis]. Calgary, AB: University of Calgary; April 2004.
2014	Hadidi P. Enhancing the Biochemical and Mechanical Properties of a Self-Assembling Scaffold-Free Tissue Engineered Knee Meniscus [PhD thesis]. Davis, University of California; 2014.
1976	Malcom LL. An Experimental Investigation of the Frictional and Deformational Responses of Articular Cartilage Interfaces to Static and Dynamic Loading [PhD thesis]. San Diego (UCSD), University of California; 1976.
1989	Anderson DD. Finite Element Analyses of the Impulsively Loaded Extension-Splinted Rabbit Knee [PhD thesis]. University of Iowa; December 1989.
1986	Bylski DI. In Situ Measurement of Meniscal Mechanics in Human Knee Joints [PhD thesis]. University of Michigan; 1986.
1997	Shelburne KB. Modeling the Mechanics of the Normal and Reconstructed Knee Joint [PhD thesis]. University of Texas at Austin; May 1997.
2006	Liacouras PC. Computational Modeling to Predict Mechanical Function of Joints: Validations and Applications of Lower Leg Simulations [PhD thesis]. Richmond, VA: Virginia Commonwealth University; August 2006.
2006	Balasubramanian S. Posterior Cruciate Ligament (PCL) Injury and Repair: A Biomechanical Evaluation of the Human Knee Joint Under Dynamic Posterior Loading; Kinematics and Contact Pressure Measurements in Normal, PCL Deficient and PCL Reconstructed Knees [PhD thesis]. Detroit, MI: Wayne State University; 2006.